REPAIR/MAINT OF BOUNDARY WALL STEEL GATE, FENCING AND CERTAIN MISC B/R WORKS AT OLD CANTT PRAYAGRAJ.

Amount

Demolition of brick work built in cement mortar including all quions, arches, pillars etc including rubbish off the premises complete all as specified & directed.

M&L for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

All as per item No 2 above but except Bricks complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius,in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished surface even and fair mixing with liquid water proofing compound (as per manufacturer instruction but not less than 200ml per 50 kg of cement) complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces of wall, complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of walls, and applying one coat of cement base paint of approved colour, complete all as specified and directed.

M&L for Complete removal of existing treatment on old decorated plastered surfaces of wall and applying two coat of exterior acrylic weather proof paint (approved colour/ shade) over and including 1mm thick wall putty complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises complete all as specified and directed.

M & L for exterior grade digital series elevation tiles in vertical surface of walls such as skirting / dado etc., size of tile shall be 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including 10 mm thick rendering as in backing of tiles in cement mortar 1:4, complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 350mm X 250mm X 7mm /450mm X 350mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for glazed ceramic coloured tiles size 300mmX200 mm x 5 to 6 mm thick,in vertical surface such as skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid coloured cermic Heavy duty exterior parking tiles, area of each tiles n. exc. 0.11 Sqm, 10mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins in repairs, etc. complete all as specified and directed. (each line wire to be measured)

Restraining Resecuring including making good wire staples of galvenised barbed wire etc complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old steel surfaces of any description n. exc 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L in repair 35mm thick Precast Cement Concrete jallies 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including all moulding but excluding frame set in CM 1:4 complete all as specified and directed.

M & L precast cement concrete type B1 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), stringcourses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, anchorage blocks etc, with plain fair faces, including chamfers, weatherings, throating etc and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick plain cement concrete , 1:4:8 type-D-2 (using 40mm graded stone aggregate) as in sub base finished surfaces even and rough to receive the finishing layer complete all as specified and directed.

M & L for Chequered cement concrete coloured tiles with gray cement and no pigment having hard rubber finish top with polymer admixtures in any pattern or design of min size 20cm x 20 cm x 25 mm thick, set jointed and poited in neat cement slurry in floors laid over and including 15 mm thick screed bed in CM mortar 1: 6 complete all as specified & directed.

M & L for Machine pressed precast concrete interlocking paver block having hard rubber finish top with polymer admixtures in any pattern or design any shape and size confirmeing to IS-15658-2006 of 60 mm thick, M-35 grade with grey cement and pigment laid over and including 25 mm thick sand cushioning, complete all as specified and directed.

M & L for 18 to 20mm thick granite tiles machine cut in vertical surfaces such as on gate pillars in single piece laid over and including 10mm thick in cement mortar 1:3 set and jointed with grey cement slurry and pointed and white cement with admixture of pigment to match the shade of the granite stone complete all as specified and directed.

Dismantling structral steel work including doors, gates, rolling shutter etc but excluding framed trussess etc complete all as specified and directed.

M&L for MS work as in door or gate etc with angle or other section drilled or welded including all fixing and locking arrangement and hold fast complete all as specified and directed.

S&F mild steel plain black 1mm thick sheet in wall cladding , steel gates, similar work cut to size, holes punched including round headed screws, clout nails or riveted fixed to steel framing with plain 40mm lap joint with riveted or welded seam including bending or turning up complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in any soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for MS work for fencing post ,rafter ,purlings ,truss and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330 complete all as specified and directed.

Supply only chain link MS galvanised medium coated as per IS 4826 fencing 40mm x 40mm mesh & 2 mm dia of wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Dismantling posts or struts ( R.C.C.) any section, embedded in concrete, brickwork or masonry including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismentaling fencing wiremesh any type complete all as specified and directed.

ms shanti sons

Shivagya Engineering

SK ENTERPRISES

Minakshi constuction co.

AMARDEEP ENTERPRISES