REPAIRS OF CEILING FANS and EXHAUST FANS and WALL MOUNTED FANS AND GEYSERS AND ITS CONNECTED ITEMS AT VARIOUS LOACATIONS AT UMROI MIL STN UNDER GE UMROI

Amount

Repair and maintenance of unserviceable ceiling fan of size1200mm/1400mm sweep including taking down carefully at same position/MES yard/contractor's work shop, by disconnecting/dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, refixing of serviceable parts after cleaning and replacement of unserviceable parts with spare parts i.e. capacitor, bearings, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for downrod, bracket, bush rod, blade etc. including greasing/oiling, assembling, refixing, cleaning, checking and tightening the lock nut for sefety point of view incl. testing complete all as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of BOQ. (ii) Rewinding of stator will be measured & paid for separately under relevant item of BOQ (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of BOQ (iv) A register will be maintained by the contractor for record of repair duly signed by User, JE E/M, Engr-in-Charge & contractor. fialing to produced the register the recovery shall be made for Rs 500/per each job on account of Bill and RAR. (v) Cost of minor part i.e. Cotter pin, screws, gease&Oil, PVC insulation tape, shall be deemed to included in the cost of quoted rate. (vi) One year warranty shall be given by the contractor for rewinding of ceiling fan without claiming any extra cost.

Removing of old burnt winding of ceiling fan size1200mm/1400mm sweep and rewinding of stator winding with superior quality winding copper wire with insulation of ceiling fan complete all as directed. Note: Qty of copper winding in each stater should not be less than 550 gms.

Supply and fix in repair of bearing good quality for ceiling fan 1200mm/1400mm sweep ISI marked. Make: SKF / NBBC / Tata

Supply and fix in repair of Gun metal bush for ceiling fan 1200mm/1400mm sweep.

Supply and fix in repair of rubber bush/reel for hanging bracket suitable for 1200/1400mm sweep ceiling fan complete all as directed

Supply and fix in repair of 3 core PVC insulated PVC sheathed flexible copper wire multistranded 1.5sqmm single core black/white colour from ceiling rose to fan connector complete all as directed. Note 3 Run of wire shall be measured as one unit.

Supply and fix in repair of capacitor 2.5 mfd 440 volt casing of plastice / copper wire terminals ISI marked complete all as directed. Make: Usha / Universal / Havells / Unistar.

Supply and fix in repair of down rod 60cm long suitable for ceiling fan 1200/1400 mm sweep complete all as directed.

Supply and fix in repair of Fan Blades suitable for ceiling fan 1200mm sweep aluminium body set of three pcs incl nut, bolts & washers etc. complete all as directed.

Supply and fix in repair of Fan Blades suitable for ceiling fan 1400mm sweep aluminium body set of three pcs incl nut, bolts & washers etc. complete all as directed.

Supply and fix of ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated with BLDC technology, AC single phase 230 watt, including smart remote with long lasting battery to control speed, multipairing, timer and other intelligent memory functions, suspected from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to ceiling fan including taking down of old U/S fan, complete all as specified and directed. Make:- Usha Model- ENERGIA 32, Crompton Model- ENERGION HS, Havells Model- EFFICIENCIA NEO or equivalent in Orient / Bajaj. Note:- (1). Old ceiling fans shall be deposited to MES store. (2)Five years warranty shall be given by Contractor for BLDC Ceiling fan.

M&L for two coat of synthetic enamel paint by spray painting matching with existing to ceiling fan complete including filling cavities with fitter materials after cleaning all dust etc, complete all as directed.

Repair and maintenance of unserviceable exhaust fan of sizes 450/300mm sweep including taking down carefully by dismantling the exhaust fan parts, inspecting the serviceability of parts, refixing of serviceable parts after cleaning, replacement of unerviceable parts i.e. bearing, bush, capacitor, connecting wires, fan blade, locknut, rubber pad etc, oiling/greasing, including refixing,reassemblig cleaning and testing of exhaust fan complete. Note: (i) Unserviceable parts replaced shall be measured and paid separately under relevant items of BOQ.(ii) Rewinding of stator winding shall be measured & paid for separately under relevant item of BOQ. (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of BOQ. (iv) Cost of minor part i.e. screws, grease& oil shall be deemed to included in quoted rate without claiming any extra cost (v) A register will be maintained by the contractor for recording the door to door maint duly signed by the user and fail to produce register the recovery shall be made for Rs500/per each job on account of Bills/RAR

Supply and fix in repair of double ball bearing (ISI marked) for exhaust fan of 450mm sweep capacity ISI marked complete all as directed. Make: SKF / NBBC / Tata

Supply and fix in repair of Double double ball bearing (ISI marked) for exhaust fan of 300mm sweep capacity ISI marked complete all as directed. Make: SKF / NBBC / Tata

Supply and fix in repair of Gun metal bush for Exhaust fan of any cap/ any size sweep complete all as directed.

Supply and fix in repair of Rewinding of exhaust fan 450mm sweep motor with superior quality copper winding wire with insulation matching with existing complete all as directed.

Supply and fix in repair of Rewinding of exhaust fan 300mm sweep motor with superior quality copper winding wire with insulation matching with existing complete all as directed.

Supply and fix in repair of fan blade set die cast aluminium suitable for exhuast fan of 450mm sweep blade colour matching with existing motor make complete all as directed.

Supply and fix in repair of fan blade set die cast aluminium suitable for exhuast fan of 300mm sweep blade colour matching with existing motor make complete all as directed.

S&F of exhaust fan 300 mm (minimum) sweep, metal body, light duty, 1200 RPM (minimum), AC single phase 230 watt, 50 Hz with bird guard, nuts, screw, bolts including electrical connection, wiring MES No in 2 cm height with synthetic enamel paint and taking down complete all as specified and directed. Make:- Usha Model- AEROCLEAN PLUS GBD DBB, Havells Model- Ventil Air-DSP or equivalent in Orient / Bajaj.

Supply & fixing in repair Exhaust fan 450 mm sweep 5 star rated single phase 220 volt with luovre shutter matching with existing including two year warranty ISI marked complete all as specified

S&F of exhaust fan 250 mm (minimum) sweep, non metallic plastic body, AC single phase 230 watt, 50 Hz with and including self closing louvers, nuts, screw, bolts of specified size electrical connection with twisted 3 core PVC in insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to exhaust fan and wiring MES No in 2 cm height with synthetic enamel paint and taking down complete all as specified and directed. Make- Usha Model- CRISPAIR LX EXHAUST FAN, Havells Model- Ventil Air-DX or equivalent in Orient / Bajaj

Supply & fix wall fan complete with Energy saving model 230V, 300 mm sweep. Make- Usha Model- Maxx Air Dew / Havells Model- Sameera or equivalent in Orient / Bajaj.

M&L for preparation of painted surfaces of exhaust fan of any make and size by scrubbing old and applying one coat of synthetic enamel paint by spray painting matching with existing complete all as specified and directed by Engr-in-Charge.

M&L for Cutting holes into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required making opening in wall for exhaust fan for sizes 450/380/300mm sweep N exc 150 Exc. 150 sq. cm complete all as directed.

Repair of rewinding of motor suitable for existing wall mounted fan with superior quality winding copper wire with insulation including matching with existing make and size of wall mounted fan complete all as directed.

Supply and fix in repair of Capacitor 1.5 Mfd 440 volt suiatable for matching with existing wall mounted fan ISI marked complete. Make: Usha / Universal / Havells / Unistar.

Supply and fix in repair of thermal fuse suitable for matching with existing wall mounted fan complete all as directed.

Supply and fix in repair of Terminal block switch suitable for matching with existing wall mounted fan complete all as directed.

Repair & maintenance of geyser of 25/50 Ltrs capacity existing make, carefully by disconnecting elect & water connection, dismantling and inspecting all the parts, for its serviceability, cleaning of serviceable parts i.e. Heating element, base assy, connecting lead, thermostat, electrical contact, electrical wiring, indicators, safety valves, vacuum control/pressure reducing valve, PVC connection, inner tank, outer tank, glass wool insulation etc and refixing the same after replacement of unserviceable parts matching with existing make and sizes as mentioned above, re-assembling,, reconnecting,refixing with electrical & water connections and testing complete all as directed. Notes (i) The defective parts to be replaced shall be measured and paid separately under relevant item of BOQ. (ii) Cost of minor items i.e. Screws, nut & bolts, all T&P etc. shall be deemed to be included in quoted rates.

S&F in repairs PVC connection 15 mm bore size with PTMT nuts,rubber washers etc complete of length 450 mm long matching with existing complete all as specified.

S&F in Repairs geyser element 2.0 KW, ISI marked with gasket, nuts, bolts suitable for the existing triangular/round shape/make of the geyser under repair incl. matching with existing complete all as specified.

S&F in Repairs geyser element 1.5 KW, ISI marked with gasket, nuts, bolts suitable for the existing triangular/round shape/make of the geyser under repair. matching with existing complete all as specified.

S&F in reapirs thermostat (ISI marked) suitable for existing make of the geyser under repair of cap 50/25 Ltrs complete all as specified.

S&F in reapairs geyser safety multifunction valve (pressure release valve) for the exsiting make & capacity of geyser complete all as specified.

M&L for painting of geysers of any cap 25/50 Ltr with 2 coats of synthetic enamelled paint after scraping the existing old painted surface complete all as directed.

M&L for painting of geysers of any cap 50 Ltr with 2 coats of synthetic enamelled paint after scraping the existing old painted surface complete all as directed.

M&L for Writing of MES No of ceiling fan/Exhaust fan/wall mounted fan/geysers with black synthetic enamelled paint Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high as directed by Engr-in-Charge.

Supply, Installation, testing & Commissioning of heater water storage type electric geyser (vertical cylindrical type) 25 Litre capacity with BEE 5 star rating(minimum) and metallic body ,porcelain enamel glass lined inner tank including fixing arrangement with providing including suitable capacity flexible cable 3 core with 3-pin plug of 16A capacity maximum 2metre length, PVC Connection pipe of size 15mm dia & 450mm length for Hot and Cold Water,including chromium plated brass nuts and fixing on Walls with and including all necessary fitting material i.e. Mild Steel Bolts (Bolts to be grouted), CP Brass Nuts, Washers, etc complete all as specified and as directed. Make : RACOLD / HAVELLS / CROMPTOM GREAVES/VENUS or as equivalent in specified make. Note:- (1) Old Geyser shall be deposited to MES store.

S&F of self closing louvers of metallic body for 300 mm exhaust fan (minimum) sweep, painted with synthetic enamel paint including taking down of old unsv louvers complete all as specified and directed.

S&F of self closing louvers of metallic body for 380/400 mm exhaust fan (minimum) sweep, painted with synthetic enamel paint including taking down of old unsv louvers complete all as specified and directed.

Schedule of Credit

M/S R.D. Electricals