COMPLETION OF INCOMPLETE ITEM OF WORK FOR SPECIAL REPAIRS TO REPLACEMENT OF DIESEL GENERATOR SET AT LAXMITEK PUMP HOUSE UNDER GE I BELGAUM

Amount

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in any type of soil for laying cables, pipes, etc. all as specified and as directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25cm thick all as specified and directed.

Removing excavated materials to a distance n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for approved riddled earth, spread dry in trenches as in cable cushioning all as specified and as directed. Note :- Punned thickness will be considered for payment.

M&L for burnt bricks, old size, sub class 'B' of designation 75, laid in trenches as in protection for UG cables all as specified and as directed.

M&L for GI tubes, light grade, 80mm bore, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

M&L for XLPE insulated, screened PVC bedded, galvanised steel strip armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 120 Sqmm x 3.5 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of suitable lugs duly crimped, cable gland on both ends, necessary thimbles/ ferrules, connecting up, testing and commissioning complete including taking down existing unserviceable LT UG cable of any description and size all as specified and as directed. Note: Excavation, earth work, cable cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

Installing, connecting, testing and commissioning only of diesel engine driven generating set comprising of Diesel engine and Alternator, water cooled type, turbo charged, fully wired, 415 volts, 3 phase, 4 wire, 50 Hz, 0.8PF, 62.5 KVA (50 KW), electrical starting system with 12 V 180 AH Battery, engine directly coupled to alternator in accordance with BS-5000/ IS-4722 with common base plate frame, flexible coupling, electronic control panel for engine and genset with monitoring meters and safety system, self excited alternator with self regulated brushless excitation mounted on common base plate with anti vibration pad, acoustic enclosure as per CPCB norms, in built MS fuel tank of capacity not less han 150 litres with fuel gauge, fuel piping, exhaust piping of suitable size and length, control cable from engine to control panel, battery charger, etc. complete all as per manufacturer's instructions, as specified and as directed. NOTE: DG Set of above specification will be supplied by MES

Installing, testing and commissioning of LT Panel Board, indoor floor mounted, cubicle type, factory made, compartmentalised, IP 54 protection class, 415 volts, 50Hz, 3 phase, 4 wire system with 200 Amps current carrying capacity, made out of 2 mm thick CRCA sheet, totally enclosed, front/ rear operated, double door with locking arrangement and ventilator slots, cable trays, glands, lugs, etc. including provisions for taking out incoming and outgoing cables, danger board, etc. and painting with epoxy powder coated over a coat of red oxide zinc chromate primer suitable to accommodate and including the following mentioned fittings with internal copper wiring and ISMC 75 base mounting frame complete including dismantling existing LT panel board of any description alongwith switch gears and accessories all as specified and as directed. Note: NOTE: LT Panel and accesoories of above specification shall be provideded by MES

ASHIRWAD ELECTRICALS