PROVN OF FALSE CEILING AT CZWS, INCINERATOR FOR BURNING OF WASTE PAPER, SECURITY LIGHT AT TRG AREA, SENTRY POST, PARKING AND WATER PIPE LINE CONNECTION AT E ZONE UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

All as per Item no 2.00 here in before but exceeding 1.5 mtr not exceeding 3.0 mtr deep complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m but not exceeding 100m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

S&F Decorated PVC False ceiling of size 600mmX600mmX5mm thick (±0.25) plain PVC sheet of 600 Kg/Cum density manufactured by an ISO-9000 certified company, used as a panel insert in a frame work made using anodized aluminum powder coated T-section of size 25mmX25mm of 19 gauge or 1mm thick in square pattern of grid size 6000mmX600mm. The aluminum frame work is supported from the ceiling with the help of J Hook or 4 mm GI wire of required size to maintain the proper levels etc. The aluminum frame work is supported on side wall with the use of aluminum L section of size 25mmX25mm of 19 gauge or 1mm thick angles etc. complete all as specified and directed.

M&L for Damp proof course 25mm thick In cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation filling & mass concrete for holding post complete all as specified and directed.

M&Lfor Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&Lfor Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:3 complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) foundation, including rafts, footings, foundation, plinth beams, bases for columns, etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 17.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Use & waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges similar works for rough finished surfaces of concrete in flat complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturer’s instructions and finishing the surfaces fair and even without using extra cement complete as specified and directed. (Note: WPC measured and paid separately as ‘Supply only’ against appropriate item of this schedule)

Supply only liquid water proofing compound as specified and as directed.

M&L for PCC 75mm thick 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base/floor complete all as specified and directed.

M&L cement concrete as in flooring 40 mm thick 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drains complete including use & waste of formwork etc all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged in spikes, framed guard bars and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat colour wash over a coat of white wash complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described over 10cm width or girth including preparation of new surface & applying and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L sand filling under floor in layer n. exc. 25cm including watering and consolidation all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-523 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

Cutting holes into or through brick/stone masonry built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required Superficial area exc. 150 sq. cm and not exc 400 sq. cm complete all as specified and directed.

Cutting existing steel tubing of size 15/20mm bore for alterations or additions (Each cut measured) complete as specified and directed.

Screwing existing steel tubing of size 15/20mm bore for alterations or additions (or lengthening screw on pipe to form connector) if necessarily done in position without taking down all as specified and directed.

M&L 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat of dado/ skirting etc complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 300mm x 450mm, 6 to 7 mm thick as in skirting / dado set and jointed in neat cement slurry and pointed with coloured cement to match tiles complete as specified and directed.

S&F in repair 15mm bore bib taps, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete as specified and directed.

S&F in repair Stop valve/ angle valve 15 mm bore cast copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butterfly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore of tube medium grade galvanized (ISI Marked) with all fittings, laid in trences/ fixed on walls & ceiling or laid in floors concealed complete all as specified and directed.

S&F 20mm bore of tube medium grade galvanized (ISI Marked) with all fittings & fixed complete to walls & ceiling or laid in floors concealed complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trench /poles/on wall complete all as specified and directed.

Supply, fixing, connecting and testing LED Flood light 100 watt with pressure die-cast aluminium housing complete with all accessories with IP 65 protection, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. (Make:- C&S Cat No : LTEF100WHPLED or equivalent model of Philips / CG)

Supply and errection of steel tubular swaged poles 9.0 metre long, type 410 SP-31 complete with cast iron base plate, final taper plug, bolts, nuts and screws, pole cap etc confirming to IS-2713 of 1980 including painting two coats of aluminum paint over a coat of red oxide primer after necessary preparation of surfaces and numbering to be done in black synthetic enamel paint complete all as specified and directed.

Supply and fixing of street light thermoplastic cable junction box of size 200 x 160 x 98 mm with knockout for cable entry icluding connecting terminals, IP- 65 protection and including one MCB SP 6Amps Make;Hansal cat no. K9255 or equivalent Syntex.

Supply and fixing street light bracket made out of GI tubing medium grade size 40 mm bore 1.50 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair MS flat iron 50mm x 6mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5 sqmm as earth continuity conductor drawn through PVC conduit 25mm dia ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for PCC (1:3:6) type C-2 with using 40 mm grade crushed stone aggregate as in foundation, coping of steel tubular poles and stay with necessary form work (if required) complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 with using 20 mm grade crushed stone aggregate as in coping of steel tubular poles/ plateform of feeder pillar box or any other indicated work including necessary form work (if required), 20mm thick cement plaster (1:4) and making the surface smooth and even by using extra cement complete all as specified and directed.

S&F ceiling fan 5 star (ISI marked) 1200 mm sweep 230 Volts AC white in colour complete with accessories and connection with existing ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed. Make USHA model No TECHNIXPLUS 5-STAR ISI MARKED or equivelent HAVELLS / CG / ORIENT.

S&F Exhaust Fan of Size 300mm sweep (ISI MARKED) 230Volts AC, Metal Body with connection from existing ceiling rose complete all as specified and diercted. (Make:- USHA, Model No : TURBO DBB-G Gray or equivalent model of HAVELLS/CG /ORIENT)

S&F Wall Fan of Size 400mm sweep, 230Volts AC with connection from existing ceiling rose all as specified and directed. (Make:- USHA, Model No : MAX AIR SUPER WF or equivalent model of HAVELLS/CG /ORIENT)

S&F Geyser 25 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve, hot and cold water CP flexible pipe etc and fixing along the wall complete all as specified and directed. (Make:- USHA, Model Mystry or equivalent model of V-Guard / Recold / Havells / Bajaj)

S&F flexible wire 2 core copper size 1.5 sqmm for fixing of ceiling fan & exhaust fan all as specified and directed.

S&F anchor nut- bolt along with washer size 6mm and length 100mm for fixing of gyser, exhaust fan complete all as specified and directed.

M/S B S CONSTRUCTION

J.K.ROY & SONS

M/S Joy Construction

M/S JANATA CONSTRUCTION