Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.5 L+₹94,543 (4.59%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹20.6 L
EMD Value
₹20,563
Closing Date
28 Mar 2024, 3:00 pmClosed
commissioner madurai corporation
Aringar Anna Maligai
Additional Work Details of Urban Primary Health Center In Avaniyapuram Bypass Road In Ward 100 Zone 5
2024_MAWS_449543_1
E2 / Est.No.76 / 23-24
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹20,563
13 Jul 2024
16 Mar 2024
28 Mar 2024
16 Mar 2024
28 Mar 2024
16 Mar 2024
Amount
Supplying and fixing UPVC (un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and sgutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi rubber (black colour) covered with over all the edges of frame and shutter the shutter will be providded with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging stroms and should have key lockable action. security protective hinges, strong locking systems and as per size for areesting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.
UPVC Ventilator Specification Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.
Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.5mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, A1 clips, Best double action floor springs, Aluminium Handles on both sides, floor stopper, Tower bolt, Locks and glass including all materials, Labour, Power consemption charges required for fabrication if necessary chipping, dismantlling making necessary holes in RCC columns, Beams or Mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868/1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections
Supply and fixing of PVC solid doors using 19gauge 19mm MS.Sq tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails, The steel tubes shall be covered with 5mm fixed in position including furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, Lock rail and bottom rail and bottom rail shall be 75mmx30mm. The over complete as per standard specification. (TWAD SOR Data--135)
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
Supply and fixing of M.Sgrills with Doors and Windows with one coat of Red oxide with Primer includin g all cost such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc, complete as per standard specification.
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Supplying and fixing of Orient make metallic colour 5star rated as per the BEE specifications 1200mm (48") sweep AC ceiling fan (Havells/Crompton/Usha/equivalent) with stepped electronic 300w regulator with 300mm down rod on the existing clamp etc.,
Supply and fixing of single box type 4'20W flu Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting
Supplying and fixing LED Indoor fittings (Light Enitting Diode ) 18w LED 300k Round type recessed fitting higher end philips/Havelles/Equivalent
Supply and Fixing 30W LED Street Light fitting with LED tube with 32mm dia GI pipe with 1 No 32mm GI bend Complete on the exisiting poster wall with PVC unsheathed copper leads MS Clamps and Aluminium Painting
Supply and Fixing 48W LED Street Light fitting with LED tube with 32mm dia GI pipe with 1 No 32mm GI bend Complete on the exisiting poster wall with PVC unsheathed copper leads MS Clamps and Aluminium Painting
White Porcelain Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe and 32mm dia CP Waste Coupling
Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin of size 550X400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated piller tape,32mm diametre C.P.Waste union,32mm dia metre P.V.C.waste pipe with rubber plug and chain,15mm dia metre G.M.wheelvalve,15mm dia brass nipple,15mm dia nylon connections etc.,including fixing the wash hand basin in the wall in position with a pair of C.I.brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the bracket swith two coats of paint over a primimg coat of anticorrosive paint in cluding testing for leackage etc.,complete complying with standard specifications
Supplying fixing S.W. Gully trap of size 150mm x 100mm with cast iron gratings
Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45x45cm medium weight L.S cover and frame etc.complete.., (Size 60x60)
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 2000 Ltr
Supply and delivery and fixing of PVC Pipes and specials For IC line & Rain water arrangements 1" PVC Pipe
1" PVC Elbow
1" Tank Nipple
1" PVC Bend
1" PVC Union
1" PVC TEE
1" PVC Coupler
1" x 1/2" PVC Elbow
1" x 1/2" PVC TEE
100ml Solvent
Supply and Fixing Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2
Fabriction supply and erection of tobulor post with Truss (100mm,80mm,75mm)The Rate shall be include the cost of tobulor post Truss members,labour charges for manufacturing and erection and Painting etc.,complete.
Providing Rain Water Harvesting arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavation for 900mm precost cement Ring 5nos filling with One, three, Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe line arrangements eith std specification etc, complete
Add GST 18%
S SUBBIAH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .