Tender OEM & Authorized Dealer

Printed HDPPE Bages:- Specification as per IS14968-2015 amendment No. 5 February 202 3specified in IS6192 Specification of Polypropleyne (PP) Woven Sacks for Packing 50 Kg Sugar Product name- Milky White Polypropylene (PP) woven Bag for packing of 50 Kg sugar, made with virgin Food Grade Material, double folded double stitched, Liner loosely inserted and hammed at the top Bag Size-590 mm x 900 m, tolerance +/- 10 mm Liner Size-610 mm x 960 mm, tolerance +/-10 mm Raw Material Grade -For Woven Fabric : Vergin Polypropelene Granuels IOCL Grade 1030RG or Equivelent, Liner : HM PP IOCL Grade 003F49 or Haldia Polymer Grade F5400 or Equivelent, Stitching Thread : Twisted Polypropelyne Multifilamint Yarn 1000 Denier Mass of unlaminated sack ( PP bag) - 125 gms , tol. +/- 6.0 gm Mass of Liner (LDPE/LLDPE/HMHDPE)-55 gms, tol. +/-6.0 gms Total weight of bags (5+6)-180 gms, tol. +6% gms -4% Average Breaking strength of fabric, Min.( Ravelled Strip method), 325mmx70mm Newton (Kgf), lengthwise as well as width wise 900(91.8). The Test Must be conducted at 27 C+- 5 C Temprature & Humidity at 65 +- 2 % as per IS 6359. -900 +/- 150 Newton Average breaking strength of Bottom Seam, Min. (Strip method) Newton (kgf) 400 (40.8) The Test Must be conducted at 27 C+- 5 C Temprature & Humidity at 65 +- 2 % as per IS 6359. -400 +/-50 Newton Elongation at Break of Fabric( Ravelled strip method), lengthwise as well as width 20 wise. The Test Must be conducted at 27 C+- 5 C Temprature & Humidity at 65 +- 2 % as per IS 6359. -min 20% Mesh Ends per deci meter-48 tol. +/- 2 dm Picks per deci meter-48 tol. +/- 2 dm Ash content Calcium Carbonate (CaCo3) at temp 550±10 ºC – 2.2% Max Printing over bags (One side/ both side)-With FOOD GRADE, water resistance INK as per printing matter provided by you. PP Recycle Logo Must be printed over bag- Bale Size -500 Nos Bag in Each Bale Bale Weight Tolerance-91.5 Kg tol. +/- 4%Mandatory Accredition/Licence-The supplier must be a Manufacturer must have BIS Licence for any Food Grain, Quality System ( As per sample). Average weight per bag of truck loaded 180 Gms. (excluding packing & binding material) minimum individual bag weight 175.8 Gms. whole lot will be rejected if any bag found less than 172.8 Gms. If average weight of pp bag is less than 180 Gms. and more than 172.8 Gms. prorata basis diduction on cost will be deducted. Make- Manufacturer & BIS certificate, Experience: Minimum 5 lacks bags per year supply experience in any sugar factory last two years

A Type jute bags for filling 50 Kg. sugar, size 87.5cm X 56.5cm with plastic food grade inner linner of 32grams, total weight 630 gm. ± 5 gm packed in 500 bags in each bales. IS: 15138 (2010) Make :- Manufacturer Only

Portable (Sugar bags 50 Kg) belt conveyor With m s jointer as per Specifications given below Specifications for Portable Belt Conveyor 12000 mm Long 600 mm Wide Belt Details; Width: 600 MM No. of Ply: 3 Ply Grade : M 24 Type: Nylon Top Cover: 3 MM Bottom Cover: 1.5 MM Make: Hindustan/Indo/ARB/NRC/Oriental Idler Roller Details; Dia: 76 MM Material: E.R.W. ‘C ’ Class Pipe Bearing: Single Row Deep groove Ball Type Length: 700 MM Spacing : 350 mm for Carrying and 2500 mm for Return Drum Pulley Details; Head Pulley: 270 x 700 x 60 MM Tail Pulley : 220 x 700 x 50 MM Snub Pulley : 114 x700 x 25 MM Rubber lagging on Head Pulley & Tail Pulley Shell Thickness: 8 -10 MM Bearing : SKF/NTN Take Up – Screw Type Speed : 30-35 Meter/Minute Drive Unit Details; Drive Sprockets: Suitable 1” Pitch Motor Type: 3 H.P. Make: Bharat Bijlee/Crompton/ABB Gear Box (Inline Helical Type) Make: Premium/Elecon/Bonfigllioli Electrical : DOL Starter Provided (Make L&T /Siemens) Total Structure of Belt Conveyor will be of M.S. Sheet / M.S. Angle Mounted on a M.S. Channel fitted with Pneumatic Wheels of ADV size 500 X19 and Revolving wheels 8” x 3” in Rear All Equipments shall be painted with One coat of Red Oxide and two Coats of enamel finish paint Smoke Gray

Spare of Sugar Mill Cane Crusher FMG Gear Box WCN 630, For 2nd Mill ,2nd Stage intermdiate Pinion Shaft teeth -21 Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Anthracite Make :- S.Merck/ Qualigens

Uranium Acetate (50 Gram) Make - S.Merck/ Qualigens

Laboratory Leageny Bottle (500 ML) Make - S.Merck/ Qualigens

Laboratory Reagent Bottle (1000 ML) Make - S.Merck/ Qualigens

Plastic Beaker (100 ML) Make :- Borosil/ Borosilicate/ Glastron

Plastic Beaker (250 ML) Make :- Borosil/ Borosilicate/ Glastron

Plastic Beaker (500 ML) Make :- Borosil/ Borosilicate/ Glastron

Pol Tube (25 ML) Make :- Borosil/ Borosilicate/ Glastron

Pol Tube (100 ML) Make :- Borosil/ Borosilicate/ Glastron

Pipet (50 ML) Make :- Borosil/ Borosilicate/ Glastron

Pipet (10 ML) Make :- Borosil/ Borosilicate/ Glastron

Pipet (5 ML) Make :- Borosil/ Borosilicate/ Glastron

Mesuring Cylander (5 ML) (Glass) Make :- Borosil/ Borosilicate/ Glastron

Mesuring Cylander (10 ML) (Glass) Make :- Borosil/ Borosilicate/ Glastron

Glass Beaker (1000 ML) Make :- Borosil/ Borosilicate/ Glastron

Test Tube Holder Make :- Standard Quality

Test Tube Stand Make :- Standard Quality

Brush for Test Tube Cleaning Make :- Standard Quality

Hand Refractometer Brix 0-32°C Make :- Hanna

Hand Refractometer Brix 30°C - 110°C Make :- Hanna

Wash Bottle (1000 ML) Make :- Standard Quality

Kettle Element (2000 Volt.) Make :- Standard Quality

Printer HP Laser Jet Tank MFP 1005 Make :- Standard Quality

UOM Name

Percentage

% of Cost of Bridge (excluding Maintenance) sanctioned by competent authority

Per mile

1000 piece

Print

Per Diem Rate

MAN DAYS

1 Piece

1 Strip

PRINT