Repair Renovation of Treasury Office complex at Basohli

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead: a) With cement mortar 1:4 (1 cement:4 fine sand) (including all leads and lifts carriages of material by M.T./ H.L)

Making the opening for door /window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground (including all leads and lifts carriages of material by M.T./ H.L)

Demolishing mud phaska in terracing and disposal of material within 50 meters lead (including all leads and lifts carriages of material by M.T./ H.L)

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead (including all leads and lifts carriages of material by M.T./ H.L)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. B) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement:5 coarse sand) admized with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed jointless cement mortar of mix. 1:4 (1 cement:4 coarse sand) admixed with water proofing dompoune donro4mint 5o IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge :22.7.1 with average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm. (50% Brick aggregate available at site) (including all leads and lifts carriages of material by M.T./ H.L)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. a)2mm thick.

Finishing walls with Acrylic smooth exterior paint of required shade. a) Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm (including all leads and lifts carriages of material by M.T./ H.L)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead. a) Of area of 3 sqm and below.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). a) Sal wood.

Providing 40x5mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix. (1 cement: 3 coarse sand :6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by M.T./ H.L)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately). a) Second class deodar wood (including all leads and lifts carriages of material by M.T./ H.L)

Providing and fixing paneling or panelling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25mm to 40mm thick. a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS:3087 marked (including all leads and lifts carriages of material by M.T./ H.L)

Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately). a) Second class teak wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows, and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw as per direction of Engineer-in-charge. a) Second class deodar wood.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a) Fixed to openings/wooden frames with rawl plugs screws etc.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by M.T./ H.L)

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, in skirting, risers of steps, over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete (including all leads and lifts carriages of material by M.T./ H.L)

Providing and fixing 6mm thick PVC wall paneling fixed with screws etc.

Providing gola 75x75mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement:3 fine sand) as per standard design. In 75x75mm deep chase (including all leads and lifts carriages of material by M.T./ H.L)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete (including all leads and lifts carriages of material by M.T./ H.L)

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS:13592 Type a including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. a) Single socketed pipes. 110mm diameter.

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accesswories for un plasticized Rigid PVC rain water pipes conforming to IS:13592 Type a including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

a) Coupler- 110mm

b) Single tee with door- 110x110x110mm

Lettering with black Japan paint of approved brand and manufacture.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Earthwork in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth as directed by Engineer-in-charges. All kinds of soil. a)Ordinary rock.

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by M.T./ H.L)

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by M.T./ H.L)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by M.T./ H.L)

Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by M.T./ H.L)

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: a)1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by M.T./ H.L)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) bCold twisted bars.

Centring and shuttering including strutting, propping etc.and removal of form work for : a) Suspended floors, roofs, landings, balconies and access plateforms.

12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by M.T./ H.L)

Providing at site of works and lowering, laying and jointing HDPE pipe (waste pipe) etc. a) 110mm dia.

Constructing bricks masonry manhole in cement mortar 1:4 mix RCC top slab with 1: 1.5 : 3 : mix (1 cement : 1.1/2 coarse sand : 3 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in side plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside 90 x 80 cm and 45cm deep including CI cover with frames (light duty) 455 x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg. a) With common burnt clay FPS(non modular) bricks of class designation 75 (including all leads and lifts carriages of material by M.T./ H.L)

Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100mm diameter and 1.20m long complete as per standard design.

Fixing glass panes with wooden fillet wherever necessary.

Renewing glass panes, with wooden fillets wherever necessary: a) Float glass panes of thickness 5.0mm (weight not less than 12.5 kg / sqm).

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screw etc. complete. a) 300x16mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screw etc. complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets. a) 25mm dia (heavy type)

Providing / stitching / supplying of window curtain.

Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

White washing with lime to give an even shade. a) Old work (two or more coats).

Supplying and fixing following sizes modules GI box alongwith modular base cover plate for modular switch in recess etc. as required.

a) 10x2 Module (75mmx75mm).

b) 3 Module(100mmx75mm).

c) 4 Module (125mmx75mm)

d) 6 Module (200mmx75mm)

e) 8 Module (125mmx125mm)

f) 12 module (200mmx150mm)

Supplying and fixing following modular switch socket on the existing modular plate and switch box including connections but excluding modular plate etc.

a) 5/6 amp. Switch

b) 3 pin 5/6 amp. Socket outlet.

c) 15/16 amp. Switch.

d) 6 pin 15/16 amp. Socket outlet.

Rewiring for light print / fan point / exhaust fan point / call bell point with 1.5 sqm FR PVC insulated copper conductor single core cable and 1.5 sqm. FR PVC insulated copper conduct or single core cable as each wire in existing surface recessed steel conduit including dismantling as required. a) Group-A.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface /recessed PVC conduit as required.

a) 2x1.5sq.mm +1x1.5 sq.mm earth wire

b) 2x1.5sq.mm +1x2.5 sq.mm earth wire

Supplying and fixing of following electrical items suitable for operating on 240/230 volts AC, 50 HZ supply.

i) Ceiling 1200mm(Crompton Greaves).

ii) Exhaust fan 300mm size(Crompton Greaves Trans Airier equivalent make).

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua for an average lead of 76.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Kathua for an average lead of 76.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua for an average lead of 76.00 Km. by M.T. d) Bricks from Kathua for an av. lead of 80.00 km. by M.T.

ARJUN SONI GOVT CONTRACTOR

Anju Devi