Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
14 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE Alwar
Alwar
REPAIR MAINTENANCE TO CERTAIN OTM BUILDINGS OF FD REGT AND ADSR, FD WKSP UNDER AGE BR-II AT ITARANA CANTT, ALWAR
2026_MES_799883_1
8599/E8
Open Tender
Civil Works
Item Rate
270 days
Alwar
REPAIR MAINTENANCE TO CERTAIN OTM BUILDINGS OF FD REGT AND ADSR, FD WKSP UNDER AGE BR-II AT ITARANA CANTT, ALWAR
6 documents required · 6 mandatory
₹500
GE Alwar
₹24,000
Yes
21 Nov 2026
21 Nov 2026
16 Dec 2026
21 Nov 2026
14 Dec 2026
6 Dec 2026
21 Nov 2026 - 5 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), not exceeding 1.5 sqm each, complete all as specified and directed. | 10 | Each | - | - |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), exceeding 1.5 sqm but not exceeding 4 sqm each, complete all as specified and directed. | 34 | Each | - | - |
| 3 | Taking down shutters of any description, exceeding 1 sqm but not exceeding 2.5 sqm each, complete all as specified and directed. | 22 | Per leaf | - | - |
| 4 | Taking down and refixing in the same opening, after necessary repairs such as easing, adjusting and refixing of building hardware, shutters of any description, not exceeding 1.0 sqm each, complete all as specified and directed. | 10 | Per leaf | - | - |
| 5 | M&L mild steel framed work such as door frames, gauze door shutters, tank casings, ladders, cooler stands, posts, parking sheds, etc., made of angle iron or hollow/square/rectangular/circular sections and other sections, including covering doors prepared for hanging or sliding, with hooks, purpose-made sliding door bolts, hinges or handles and fittings (excluding steel or other covering, running rails and guides), hanging, fastening and fixing, including necessary arrangements for fixing wire mesh, bolting, welding and fixing the frame with necessary holdfasts into walls, including cutting holes in walls and filling the holes with PCC to make good the surfaces, as required, conforming to Fe 290, Grade E-165, including dismantling old rusted ironwork wherever required at site, complete all as specified and directed. | 100 | Kg | - | - |
| 6 | S&F powder-coated anodised aluminium door of approved colour, with powder-coating thickness not less than 50 microns, comprising frame sections of size 63.5 mm x 38.10 mm x 1 mm thick and shutter sections comprising vertical door stile of size 45 mm x 45 mm x 1 mm thick and top, bottom and middle rails of size 110 mm x 45 mm x 1 mm thick, including 5.5 mm thick frosted glass with glazing clips, PVC track gasket and EPDM rubber gasket for weather-tightening, recessed-type handles (2 Nos.), hinges (4 Nos.), mortice lock (1 No.) and hydraulic door closer (1 No.) on each shutter, complete all as specified and directed. | 18 | Sqm | - | - |
| 7 | S&F aluminium windows made out of 1.2 mm thick powder-coated aluminium sections, powder-coating thickness not less than 50 microns, comprising double shutters of glass/wire-gauze shutters, including 75 mm pitch aluminium grill fixed to wire-gauze shutter, all necessary accessories, joining cleats, glazing clips, rubber/neoprene packing for fixing glass/wire gauze and provision for AC/cooler opening as required, including aluminium handles and 100 mm 'D' type tower bolts (2 Nos. in each shutter) and 100 mm aluminium hinges (2 Nos.), with necessary steel screws, complete all as specified and directed by the Engineer-in-Charge. Sizes of aluminium sections shall be as follows: (a) Outer frame: 125 mm x 44 mm x 1.2 mm thick. (b) Shutter frame section: 44 mm x 44 mm x 1.2 mm thick for glass shutter and 44 mm x 25 mm x 1.2 mm thick for wire-gauze shutter. (c) Including 12 mm square MS grill with 35 mm x 5 mm thick flat iron strip frame all around, fixed to aluminium frame with hole fasteners, of required size, so that the grill is fixed to the wall. Note: Rates quoted shall be inclusive of all fittings and fixtures, including 12 mm square bar MS grills, 4.8 mm thick glass and MS wire gauze; nothing extra shall be paid in this regard. | 12 | Sqm | - | - |
| 8 | S&F factory-made single-extruded WPC (wood polymer composite) solid decorative-type flush door shutter, 30 mm thick, comprising virgin polymer of K value 58–60 (suspension grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gm), having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N (face) and 900 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity of 850 N/mm² and resistance to spread of flame of Class A category, with properties of being termite/borer-proof, water/moisture-proof and fire-retardant. WPC shall be laminated with PVC foil of minimum 14 microns thickness of approved design, pasted with hot-melt adhesive on both faces of shutter, and fixed with 4 Nos. 125 mm long stainless steel butt hinges of required size, with necessary full-body threaded star-headed countersunk SS screws, complete as directed by the Engineer-in-Charge. Note: Stainless steel butt hinges shall be included in the quoted rate. | 35 | Sqm | - | - |
| 9 | Providing and fixing factory-made single-extruded WPC (wood polymer composite) solid decorative-type glazed and skeleton door shutter, 30 mm thick, comprising virgin polymer of K value 58–60 (suspension grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gm), having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N (face) and 900 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity of 850 N/mm² and resistance to spread of flame of Class A category, with properties of being termite/borer-proof, water/moisture-proof and fire-retardant. WPC shall be laminated with PVC foil of minimum 14 microns thickness of approved design, pasted with hot-melt adhesive on both faces of shutter, and fixed with 4 Nos. 125 mm long stainless steel butt hinges on each shutter of required size, with necessary full-body threaded star-headed countersunk SS screws, complete as directed by the Engineer-in-Charge. Note: Stainless steel wire cloth of 0.36 mm nominal diameter wire and average aperture width of 1.40 mm, and butt hinges, shall be included in the quoted rate. | 35 | Sqm | - | - |
| 10 | S&F factory-made single-extruded WPC (wood polymer composite) solid door/window/clerestory window and other frames/chowkats, size 50 mm x 75 mm, comprising virgin PVC polymer of K value 58–60 (suspension grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gm), fabricated with mitre joints after applying PVC solvent cement and screwed with full-body threaded star-headed SS screws, having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) and 1100 N (edge), minimum compressive strength of 58 N/mm², modulus of elasticity of 900 N/mm² and resistance to spread of flame of Class A category, with properties of being termite/borer-proof, water/moisture-proof and fire-retardant, fixed in position with MS holdfasts/lugs/SS dash fasteners of required diameter and length, complete as directed by the Engineer-in-Charge. | 70 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tender8599.pdf
Tender Documents • 1.06 MB
BOQ_897479.xls
BOQ • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .