Zone-3, Tajganj, Room No. 70 Construction work for the damaged precast RCC slab of the drain running from Tal Firoz Khan Water Tank Madhu Nagar Crossing towards Sainik Vihar.

R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 (One Part of Cement, Two Part of Coarse Sand and Four Part of 2cm Stone Grit) in Raft foundation and footing with 4cm. Gauge apporved stone ballast supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than m-150. (5-Chapter PWD SCH.No.287)

R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter S.I. No.-284) PWD Sheduled

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (b) 10mm to 12mm tor. (Chapter No. 10 S.I. No. 504(B))

Providing and laying Cement Concrete in 1:2:4 of not less than strength of M-150 stone grit (20 mm nominal size) approved coarse sand and cement. Curing complete including of cost of form work in foundation and floors.(5-Chapter SI.No.279(a))PWD Shedule

Mild steel or iron work in heavy sizes such as trusses. Built up gates record rack, roof work. Gates etc. Brought to required form including drilling holes riveting or welding where necessary and also including supply of steel, bolts, nuts wastage etc. And their fixing required for proper completion of the work. (S.I. No. 503)

Total(A)

Add amount for Estimate Figure match

Say Amount