Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹2.5 L
Closing Date
30 Apr 2025, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
BUILDING
14 conditions · 3 needing a document upload
For works costing more than Rs.50 Lakhs:The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V = Advertised value of the tender in crores of Rupees. N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the above,the offer will be summarily rejected.(Ref : Advance Correction Slip No.1 dt:14/07/2022 to IRSGCC- 2022 ).
As per Clause 10.1 of Part-I of IRSGCC-April 2022:The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value ofthe tender. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Eligibility criteria for single similar work previously executed : Any civil engineering work except track work / transportation.
48 conditions · 8 needing a document upload
Whether required test certificates/samples, if any have been uploaded?
Tenderers are requested to ensure the uploading of mandatory documents under the relevant tabs as per check list and put(tick) mark wherever applicable as per CE/Works/Chennai letter No.W.496/Tender policy dt.03.07.2023. The check list is available under DOCUMENTS tab. The check list is only exhaustive. Tenderer should ensure that all the documents required as per relevant clauses are uploaded. The mere submission of documents mentioned in the check list alone will not qualify for the eligibility of the tender.
Multiple L-1 :- In case of more than one L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and the current financial year up to the date of opening of tender may be selected for award. Railway reserves the right and may seek the above details within specified period, if not submitted by the tenderers along with the bid.
The contractor should ensure that the staff employed are physically fit, with a sound mind and of good character. To this effect, necessary police clearance certificate should be obtained from local police authorities before the contractor's staff are put into service. This will be in accordance with the Railway Board Letter No. 2020/Sec(CCB)/45/50/Misc Dt.03.02.2020. Refer Annexure I & II.
All the contracts on works/goods/services will be subject to the new GST act as applicable from time to time. Contractors have to register themselves with GST authorities and to furnish the GST registration number in order to process the bills from 01.07.2017
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Deployment Of Qualified Engineers At Work Sites By The Contractor. The contractor shall also employ Qualified Graduate Engineer or Qualified Diploma Holder Engineer, based on value of contract, as may be prescribed by the Ministry of Railways through separate instructions from time to time.(As per RB ltr no.2012/CE-I/CT/O/20 dt:10.05.2013)
One qualified Graduate Engineer when the cost of the work is Rs. 200 lakhs and above.
One qualified Diploma holder Engineer when the cost of the work to be executed is more than Rs.25 lakhs but less than Rs.200 lakhs.
In case the contractor fails to employ the technical staff as aforesaid, he shall be liable to pay a an amount of Rs.40,000/ (Rupees Forty thousand) for each month or part thereof for the default incase of Graduate Engineer and Rs.25,000/- (Rupees Twenty five thousand) for each month or part thereof for the default in case of Diploma holder (Engineer)
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- April 2022, with all correction slips up to date and to carry out the works accordingly.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
I/We also agree to keep this tender open for acceptance for a period of 60 days from the date fixed for opening the same
I/We offer to do the work for DRM/W/O/SA, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within the period of completion stipulated in the tender document, from the date of issue of letter of acceptance of the tender. The Bid security shall stand forfeited without prejudice to any other right or remedies in case my/our Tender is accepted and if : (a) I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC as detailed in general instructions. (b) I/We do not commence the work within seven days after receipt of orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
A tenderer claiming credentials as an individual for their share in a partnership firm, has to submit both the deeds of (i) partnership deed, showing % of their share and (ii) retirement deed from the partnership firm(or) deed showing the closure of business operations of the partnership firm, as applicable. Failing to submit the above deeds, the offer of the tenderer will be summarily rejected.
The tenderer shall clearly specify whether the tender is submitted on his Own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) I Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. , The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Attorney, if opted) for constitution of their concern as per Cl.14 of GCC-Part-l and as per a)Clause 17 of GCC - Part-1, for JV b)Clause 18 of GCC - Part-I, for Partnership Firm.
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, contact number (ii) Copy of PAN card (iii) Copy of GSTIN card.
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/Contractor not having NEFT form may down load the empty NEFT form available in Document site)
Submission of physically signed Annexure-V by the tenderer is discontinued vide Rly Bd letter dt:14/05/2024 (Uploaded)
Submission of Annexure-V(A) under Document Verification Certificate. In case of other than company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case my be. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid
Construction/Repairs Gang rest room with tool room for Group D staff over Salem Division (9 Nos) (SSE/PW/N/SA-2 Nos & SSE/PW/S/SA-7 Nos)
SA-OT-04-2025-05
SA-OT-04-2025-05
Open
Works - General
10 Months
Salem, Tamil Nadu
₹0
₹2.5 L
30 Apr 2025
8 Apr 2025
72 items across 2 schedules · ₹1,90,69,606.26 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 270 | 205.45 | 55,471.5 |
| 2 | Ordinary rock | cum | 90 | 412.95 | 37,165.5 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 180 | 253.95 | 45,711 |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 180 | 2,161.2 | 3,89,016 |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 900 | 14.5 | 13,050 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 27 | 6,833.4 | 1,84,501.8 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 45 | 6,670.25 | 3,00,161.25 |
| 8 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 135 | 307.95 | 41,573.25 |
| 9 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 900 | 766.55 | 6,89,895 |
| 10 | Shelves (Cast in situ) | Sqm | 45 | 766.55 | 34,494.75 |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 495 | 608.35 | 3,01,133.25 |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 360 | 804.25 | 2,89,530 |
| 13 | Under 20 cm wide | Metre | 360 | 181.9 | 65,484 |
| 14 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 45 | 9,673.5 | 4,35,307.5 |
| 15 | 50 mm thick | Sqm | 51.84 | 1,580.9 | 81,953.86 |
| 16 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 54 | 8,683.8 | 4,68,925.2 |
| 17 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 216 | 10,306.2 | 22,26,139.2 |
| 18 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 89.1 | 688.45 | 61,340.9 |
| 19 | Cement Mortar 1:6 (1 cement : 6 coarse sand). | cum | 45 | 5,549.95 | 2,49,747.75 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 225 | 8,288.35 | 18,64,878.75 |
| 21 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 36 | 1,018.05 | 36,649.8 |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 270 | 1,063.45 | 2,87,131.5 |
| 23 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 27 | 1,897.1 | 51,221.7 |
| 24 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading | Sqm | 180 | 1,521.6 | 2,73,888 |
| 25 | Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | Sqm | 90 | 148.5 | 13,365 |
| 26 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 3600 | 197.7 | 7,11,720 |
| 27 | Twin rubber stopper | Each | 54 | 62.25 | 3,361.5 |
| 28 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) | Sqm | 13.5 | 7,249.9 | 97,873.65 |
| 29 | Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). | Sqm | 49.5 | 10,284.7 | 5,09,092.65 |
| 30 | Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/-. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) | Sqm | 54 | 10,451.95 | 5,64,405.3 |
| 31 | Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) | Sqm | 90 | 7,634.1 | 6,87,069 |
| 32 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 1350 | 142.3 | 1,92,105 |
| 33 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 765 | 545 | 4,16,925 |
| 34 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 36 | 935.6 | 33,681.6 |
| 35 | Size of Tile 600x600 mm | Sqm | 675 | 1,416.65 | 9,56,238.75 |
| 36 | 110 mm diameter | Metre | 54 | 319.75 | 17,266.5 |
| 37 | 110 mm | Each | 18 | 119.95 | 2,159.1 |
| 38 | 110 mm bend | Each | 18 | 132 | 2,376 |
| 39 | 110 mm Shoe | Each | 18 | 115.95 | 2,087.1 |
| 40 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 45 | 671.55 | 30,219.75 |
| 41 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. | Sqm | 810 | 1,444.9 | 11,70,369 |
| 42 | 1:6 (1 cement: 6 fine sand) | Sqm | 2250 | 282 | 6,34,500 |
| 43 | 1:3 (1 cement : 3 fine sand) | Sqm | 720 | 253.05 | 1,82,196 |
| 44 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2250 | 158.95 | 3,57,637.5 |
| 45 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 315 | 144.9 | 45,643.5 |
| 46 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 315 | 140.05 | 44,115.75 |
| 47 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 18 | 5,781.35 | 1,04,064.3 |
| 48 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 18 | 1,913.75 | 34,447.5 |
| 49 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 18 | 299.35 | 5,388.3 |
| 50 | 32 mm dia | Each | 18 | 104.35 | 1,878.3 |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 18 | 1,411.15 | 25,400.7 |
| 52 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms | Each | 18 | 325.1 | 5,851.8 |
| 53 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 18 | 146.3 | 2,633.4 |
| 54 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 18 | 600.35 | 10,806.3 |
| 55 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. | Each | 18 | 607.05 | 10,926.9 |
| 56 | 25 mm nominal dia Pipes | Metre | 180 | 626.05 | 1,12,689 |
| 57 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). | Each | 9 | 670.15 | 6,031.35 |
| 58 | 20 mm nominal bore | Each | 9 | 397.45 | 3,577.05 |
| 59 | 150 mm diameter | Each | 18 | 190.1 | 3,421.8 |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 9000 | 9.7 | 87,300 |
| 61 | 15 mm nominal bore | Each | 18 | 434.2 | 7,815.6 |
| 62 | 15 mm nominal bore | Each | 18 | 594.75 | 10,705.5 |
| 63 | 150 mm diameter | Metre | 180 | 591.4 | 1,06,452 |
| 64 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 9 | 11,687.1 | 1,05,183.9 |
| 65 | With 20x20 mm square bar | Each | 27 | 461.35 | 12,456.45 |
| 66 | For horizontal surface one coat @1.10 kg per sqm. | Sqm | 810 | 311.5 | 2,52,315 |
| Schedule total | ₹1,60,68,124.26 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREIIIFORPOLICEVERIFICATION.pdf
ATTACHMENT
SPECIFICATIONFORBUILDINGSBRIDGEWORKS2025.pdf
ATTACHMENT
RBCECEICTImplementationofContractoremb.pdf
ATTACHMENT
ANNEXUREVVAVIAVIB.pdf
ATTACHMENT
GCCApril2022NEW.pdf
ATTACHMENT
INSTRUCTIONSTOTHETENDERER.pdf
ATTACHMENT
ProcedureforLetterofCredit.pdf
ATTACHMENT
Workonhanddetails.pdf
ATTACHMENT
SafetyprecautionstobeadoptedwhileworkinginElectrifiedArea.pdf
ATTACHMENT
Splconditionsofcontractformovementofvehicle.pdf
ATTACHMENT
ACS8TO9.pdf
ATTACHMENT
ACS5TO7.pdf
ATTACHMENT
CheckListandNEFTform.pdf
ATTACHMENT
ACS1TO4.pdf
ATTACHMENT
RlyBdletterClarificationofAnnexureV.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .