Karnataka

Financial Eval

Works

Buildings

Addition and Alteration to the Existing Namma Clinic Building at Ramachandrapura in Ward No.12 Doddabommasandra.

Bengaluru North City Corporation

BNCC Vidyaranyapura Division | Karnataka

Amount: Refer DocsCloses: 3 Mar 2026Closed

Timeline

Published23 Feb 2026
Closed3 Mar 2026
Financial Evaluation—
Award—

Bids

1 Bid3 Mar 2026

#	Company	Amount	Status
1	RAGHUNATH B P ₹40.1 Laccepted-finance	₹40.1 L	accepted-finance

Tender Value

Refer Docs

EMD Value

₹1 L

Closing Date

3 Mar 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Bengaluru North City Corporation

Contact Person

NAGAPPA KAMATI

Mobile Number

Work Description

Addition and Alteration to the Existing Namma Clinic Building at Ramachandrapura in Ward No.12 Doddabommasandra.

Tender Information

Tender ID

BNCC/2025-26/BD/WORK_INDENT212

Reference Number

BNCC/2025-26/BD/WORK_INDENT212

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

BNCC Vidyaranyapura Division

Source Website

Subscribe to view

Documents Required

4 documents required · 0 mandatory · 4 optional

Technical Bid

OptionalAnnual Turnover Certificate

OptionalCompany Registration Certificate

OptionalReserved Category Certificate

OptionalSmall Scale Industries Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification Information to qualify for Award of this Contract, each Tenderer in its name should have in the last five years 2020-21 to 2024-25. Achieved in at least two Financial Years a minimum Financial Turnover (in all classes of Civil Engineering Construction Works only) of Rs. 82.58 lakhs. Further, the Financial Turnover of the Previous Years shall be given a Weightage of 10percent per year to bring them to the Price Level of 2024-25.

All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification Information to satisfactorily completed (at least 50 percent of the contract value), as prime contractor, at least one similar work value not less than Rs. 20.65 Lakhs (usually not less than 50percent estimated value of contract).

Should not have undergone Financial Loss in the last five Financial Years. In support of this, the Tenderer shall submit Reports on the Financial Standing of the Tenderer such as Profit and Loss Statements and Auditors Reports for the last Five Years

Executed in any one Financial Year the following minimum quantities of Work such as 1 Earth Work 5.18 Cum 220mm thick Granite Slab 162.69 Painting 1587.29 Sqm in support of this the Tenderer shall furnish Work done Certificate by mentioning the Executed Quantity in one Financial Year duly certified by the Competent Authority not below the Rank of Executive Engineer along with the Technical Bid

Liquid Assets and / or availability of Credit Facilities of no less than Rs.12.40 lakhs (Credit Lines / Letter of Credit / Certificates from Banks for meeting the Fund Requirement, In the case of the death of a Contractor after executing the Agreement / Commencement of the Work, his Legal Heir, if an Eligible Registered Contractor and willing, can execute and complete the work at the accepted Tender Rates irrespective of the Cost of the Work.

To qualify for a Package of Contracts made up of this and other Contracts for which Tenders are invited in this IFT, the Tenderer must demonstrate having Experience and Resources to meet the Aggregate of the Qualifying Criteria for the Individual Contracts. Subcontractors Experience and Resources shall not be taken into account in determining the Tenderers Compliance with the Qualifying Criteria.

Tenderers who meet the above specified minimum Qualifying Criteria, will only be qualified, if their available Tender Capacity is more than the total Tender Value. The available Tender Capacity will be calculated as under Assessed Available Tender Capacity is AxNx1.5 B Where A is Maximum Value of Civil Engineering Works executed in any one year during the last five years (updated to 2024-25 Price Level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the Works for which Tenders are invited, 6 months. B is Value at 2024-25 Price Level, of existing commitments and ongoing works to be completed during the next 11 months

Amount put to tender is excluding GST

Fee & Financial Details

Tender Fee Amount

₹1,040

EMD Fee Amount

₹1 L

Important Dates

Last Activity

3 Mar 2026

Published

23 Feb 2026

Download Ends

25 Feb 2026

Pre-Bid Meeting

25 Feb 2026

BOQ Preview

•

Addition and Alteration to the Existing Namma Clinic Building at Ramachandrapura in Ward No.12 Doddabommasandra.

•

Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost ...

•

Demolishing Cement concrete manually / by mechanical means including disposal of material to the appropriate disposal area as per direction of engineer in charge.

•

Providing and constructing un reinforced plain cementconcrete pavement, thickness as per design, over a preparedsub base, with 43 grade cement or any other type as perClause 1501.2.2 M20 (Grade), coar...

•

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

•

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings AND bridges and such simillar works in all kinds of soils, as per ...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Lead for disposal of earth shall be payable at Carriage rates (Lead AND Lift) by mechanical means including loading and unloading up to 15kms.

•

Cost of Haulage Excluding Loading and Unloading Taking output 10 t load and lead 10 km = 100 t.km

•

Providing AND fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing AND fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath AND courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing a...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing AND fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners AND jointed 2 No.s of 150mm long bra...

•

Providing AND fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top AND bottom rails, covered with hea...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot AND cold water supply, including all CPVC plain AND brass threaded fittings, including fixing the pip...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing AND fixing white vitreous china cistern with dual flush fitti...

•

Extra for providing opening of required size AND shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.

•

Supplying and fixing of modular switch AND connected accessories on existing modular switch plate as per IS 3854 and IS 1293.. Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch AND connected accessories on existing modular switch plate as per IS 3854 and IS 1293.. 6A One Way Switch

•

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector AND ha...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...

•

Supplying AND fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking ca...

•

Supplying and fixing of class A GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40mm

•

Providing AND fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm AND above sized fan) with copper motor having mounting arrangements as per direction of Engineer in char...

•

Design,supplying,erectingtestingandcommissioningofPassenger/Bedcumpassengerhospitalliftwithspeedof1mtrpersecond,variablevoltagevariablefrequencydrive,withorwithoutmachineroomfortheavailablewellsize,op...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

corrigendum 1 buildings.pdf

Others - Corrigendum-1 • 0.44 MB

KW 02- Namma Clinic.doc

Tender Document • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

RAGHUNATH B P

₹40.1 Laccepted-finance