Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC 11 GURU NANAK MARKET AMBALA ROAD SAHARANPUR 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹36.9 L+₹1.5 L (4.18%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹37.9 L+₹2.4 L (6.84%)Rejected-Finance FLAT NO 401 TULSANI HEIGHTS 4TH FLOOR GREEN PARK SOCIETY AKURDI GURUDWARA TO WALHEKAR WADI ROAD CHINCHWAD PUNE 411033 | PUNE | MAHARASHTRA | 411033 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹39.6 L+₹4.2 L (11.8%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹40.1 L+₹4.7 L (13.2%)Rejected-Finance HIMACHAL BUILDING SHOP NO 10 CD BARFYWALA ROAD JUHU LANE ANDHERI W MUMBAI 400058 | MUMBAI SUBURBAN | MAHARASHTRA | 400058 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
REPAIRS / MAINTENANCE OF STREET LIGHTS/SECURITY LIGHTS WITH CONNECTED WORKS AT TECH AREA OF CAFVD UNDER AGE E/M-II IN GE (CENTRAL) KHADKI.
2023_MES_598083_1
8807/E8 OF 2023-2024
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
CAFVD area
AS PER NIT
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹98,000
Yes
1 Aug 2023
24 May 2023
22 Jun 2023
24 May 2023
20 Jun 2023
8 Jun 2023
24 May 2023 - 1 Jun 2023
Amount
NOTE :- a) Contractor has to arrange his own vehicles along with mounted hydraulic ladder/articulated & telescopic boom lift arrangement for attending the complaint of Street light throughout entire area of CAFVD (b) Contractor shall depute minimum 2 staff daily to attend and rectify the complaint of street light. if not, Contractor shall have to bear a penalty of Rs 50.00 per complaint or maximum of Rs 500 per day on this account. (c) Complaints has to attend and rectify the complaint/defect irrespective of no of trips/Complaints as alloted by Eng-in-Charge.
Taking down old unserviceable street light/flood light/post top/bollard light of any capacity
Taking down old unserviceable MCB/MCCB of any capacity.
Taking down old unserviceable driver of any capacity.
Taking down old unserviceable service wire of any size.
Supply and fix LED Street light 45W including making electrical connection to the fitting with Suitable size of service wire . Cat Part No. LSTS-45-CDL-M. MAKE :- Crompton Freedom Neo. or equivalent.
Supply and fix LED Street light 60W including making electrical connection to the fitting with Suitable size of service wire . Cat Part No.TRP-409-60-57-SL-GL-NSG.. MAKE :- Crompton Raptor Neo or equivalent.
Supply and fix LED Street light 90W including making electrical connection to the fitting with Suitable size of service wire . Cat Part No. TRP-411-90-57-SL-GL-NSG. MAKE :- Crompton Raptor Neo or equivalent
Supply and fix LED Street light 120W including making electrical connection to the fitting with Suitable size of service wire . Cat Part No. TRP-411-120-57-SL-GL-NSG. MAKE :- Crompton Raptor Neo or equivalent
Supply and fix LED Flood light 70W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge.Cat part No.Rover pro LFL-80-CDL/60-M. MAKE :- Crompton or equivalent
Supply and fix LED flood light 100W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge.Cat part No.Rover pro CFS-504-100-57-60D-SL-GL-NSG. MAKE :- Crompton or equivalent
Supply and fix LED flood light 120W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge.Cat part No.Rover pro TFS-504-120-57-60D-SL-GL-NSG. MAKE :- Crompton or equivalent
Supply and fix LED post top luminaries 40w decorative post top for 360 degree indirect light fixing on existing pole with all necessary fixing arrangement and all accessories prewired including connecting up with twin core copper conductor cable with suitable size Cat Part No LPTO-40/ CDL MAKE :- Crompton or equivalent
Supply and fix LED bollard light fittings, LED 10Watt, all including fixing material and earth work complete and connected to neares electric pole all as specified and as directed. MAKE :- Crompton (Cat No: LBLSN-10-CDL ) or equivalent
Supply and fixing at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge.Cat Part No SLE HB 150W COMET NEO-N MAKE :- Surya or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.
Supply and fixing street light mounting bracket, made out of Light grade GI Tubing 32 mm bore, bend into shape inner angle not less tan 120° and over all length not less tan 1.0 Mtr including suitable size clamps made from not less than 25x3 mm ms streep, Nut, bolts 12 mm dia with washers complete fixing arrangement complete all as specified and as directed.
Excavation in trenches in any type of soil not exceeding 1.5 Metre deep and not exceeding 1.5 metre width and getting out in any type of soil including forming bottom surface & sides to required slope/size as directed by the Engineer-in-Charge.
Material and labour for sand/fine dust cushioning to under ground cable providing with a layer of and 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed by Engr-in-charge. NOTE :- punned thickness of 18 cm will be measured for payment
Supply & laying un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified and as directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil complete all as specified and directed.
Removal of surplus soil to a distance not exceeding 50 m and depositing where directed by Engr-in-charge.
Supply and Lay 10 Sqmm 2 core LT underground cable XLPE insulated armoured heavy duty 1100 Volts grade with aluminium conductor multistranded including centre glands/lugs/jointing materials etc..laid in trench or fixed it to wall including dismantling of old one, connecting testing and commissioning complete for the following sizes:
Description all as per item No 22 above but 16 Sqmm 4 core
Description all as per item No 22 above but 25 Sqmm 3.5 core
Description all as per item No 22 above but 35 Sqmm 3.5 core
Description all as per item No 22 above but 50 Sqmm 3.5 core
Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 2.5 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .
Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 4 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .
Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 6 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .
Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 10 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .
Supply and fix PVC sheathed 1100V grade flat three core stranded aluminium conductor of size 2.5 sqmm including conduit pipe connecting from SMC box to street light fitting Complete all as specifed and directed by Eng-in-Charge
Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Oms including testing complete all as specified Make U-Protect or equivalent NOTE :- IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.
Supply and fix 40 mm bore GI tubing light grade in trenches or on pole for cable protection complete all as specified and as directed.
Material and labour Aluminum lugs eye lid or barrel type complete with cripping/soldering etc including removing the wornout lugs suitable for aluminium cables/copper cables of sizes from 16 Sqmm to 95 Sqmm.
Supply and fix MCCB 415V, 3 phase 50 HZ FP 63 to 100 Amps breaking capacity 16KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.
Supply and fix MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 16 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.
Supply and fix MCCB 415V, 3 phase 50 HZ FP 200 Amps breaking capacity 36 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.
Supply and fix MCB, single pole, 6-32 Amp, 240 Volts, 'C' Curve 10KA including dismantling old one MAKE :- Legrand ( DX3)/C&S/Schneider/L&T
Supply and fix MCB, Triple pole and neutral , 40 Amp, 415 Volts, 'C' series 10 KA including dismantling old one MAKE :- Legrand ( DX3)/C&S/Schneider/L&T
Supply and fix Triple pole and neutral , 63 Amp, 415 Volts, 'C' series 10 KA including dismantling old one MAKE :- Legrand ( DX3)/C&S/Schneider/L&T
Supply and fix LED power output driver of LED street light with power output up to 45W including dismantling defective driver from existing light fitting complete all as directed.
Supply and fix LED power output driver of LED street light with power output from 45W to 60W including dismantling defective driver from existing light fitting complete all as directed.
Supply and fix LED power output driver of LED street light with power output from 60W to 90W including dismantling defective driver from existing light fitting complete all as directed.
Supply only electronic Intenal surge protector cap 10 KV suitable for differant type and diferant make LED street / flood lights as per old / existing makes like C&S,Havells, HPL, Bajaj, Crompton etc. fixed internaly all as specified and directed.
Disconnecting and taking out existing SMC of any size and in any position on pole and Supply and fix in repair sheet moulding compound junction (SMC) suitable for terminating 2 Nos 4 x 6/10/16 Sqmm UG cable including S&F of one in Nos MCB SP 6-32A including cable glandes- 2 Nos, and two way connector 1 No, including dismantling old one. MAKE :- Sintex/National
Supply and fix alpharex digital time switches-Astro D22 astro 230V 50Hz R5a-20T suitable for street light including making electrical connection to the terminals of astro switch & Setting the On/Off time as specified and directed by Eng-in-Charge . MAKE :- Cat part No.4126 57of Legrand or equivalent make of Havells/L&T
Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm including dismantling the old burnt cable joint termination.
Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm including dismantling the old burnt cable joint termination.
Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with double coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc as per directions by Engineer-in-Charge
Material and labour for preparation of old painted surface of F/P box/LT Panel by removing all dirt, dust, etc and painting complete surface including connected accessories with one coat of synthetic enamel paint of approved colour over a coat of primer including writing of identification with proper stencil cut etc as per directions by Engineer-in-Charge
Supply and errect in true vertical position LT electric pole, Octogonal Pole, hot deep galvanised, with base plate of 220x220x12 mm thick, 07 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . MAKE :- Bajaj / Crompton or as approved by GE NOTE :- Earth work, PCC foundation as per manufacturer recommendation included in the unit rate.
Supply and errect in true vertical position steel tubular swaged poles in replacement complete with MS base plate of 6mm of size 300mm X300mm finial taper plug,pole cap,bolts,nuts and washers screws,pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410 SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bitumenous paint for portion embedded in concrete complete all as specified and as directed NOTE :- Excavation and earth work ,PCC in foundation /plinth block/coping shall be measured and paid separately
Material and labour for dismantling electric pole any type any size and removing from site all as specified and as directed.
Excavation in trenches n.exc. 1.5 mtr in wide and exc. 1.5 mtr but n. exc 3.0 m in depth and getting out in hard / dense soil complete all as specified and directed.
Material and labour for cement concrete in foundation filling and mass concrete 1 : 4 : 8 type D2 complete all as directed by Engineer-in-charge.
Material and labour for PCC 1:3:6 type C-1 with 20mm agregate in copping including necessery form work all as directed by Engr-in-Charge
Material and labour for cutting through existing bituminous road /PCC/floor/ along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finishes complete all as specified. NOTE :- GI Pipe will be measured and paid seperately in respective item.
Supply and fix in repair DX3 Power contactor suitable for power supply 63 Amps 4 NO Contactor including making electrical connection to the contactor complete all as specified & directed by Eng-in-Charge. MAKE :- Cat part No.4125 53 of Legrand or equivalent make of Havells/L&T
Material and labour for disconnecting LT XLPE cable of any size from LT Panel or any location as directed for finding fault and Material and labour for defect rectification underground cable laid in trenches or any location by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. all as directed. NOTE :- (i) The fault locating equipments will be brought to site within the 12 hours of instruction from Engr-in-Charge. (ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and has to be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered from the dues to the contractor. (iii) Rates included necessary earth work for opening cable for ready to jointing.
Supply and laying of aerial bunched XLPE LT Cable of Size 16 sqmm 4 core (16x3+16x1) 1100 Volts grade with aluminium conductor multistranded including centre glands/lugs/jointing materials/all fixing accesories etc. complete all as specified & directed of Eng-in-Charge
Supply and laying of aerial bunched XLPE LT Cable of Size 25 sqmm 4 core (25x3+25x1) 1100 Volts grade with aluminium conductor multistranded including centre glands/lugs/jointing materials/all fixing accesories etc. complete all as specified & directed of Eng-in-Charge
Supply and laying of reflective radium Night safety water proof sticker of Suitable colour of dimension 50.8 mm X 48 M of High intensity conspicuity on street light poles complete all as specified & directed of Eng-in-Charge
Supply, installation, commissioning and testing of outdoor type feeder pillar panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar, of capacity 100 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proof and degree of protection not less than IP-55 . The panel shall be made out of 3.00mm thick CRCA mild steel sheet , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. (a) Incomer MCCB 63 amps 16 KA (b) DX3 Power Contactor , 3 phase 4NO (c) Alpha rex digital type Timer switch (d) Intelligent panel meter (e)Indicator lamp set of three
ONKAR ELECTRIC AND GENERAL STORE
SHAILENDRA B TULSANI
Techmat trading solution
M/s PIONEER CONTRACTORS
M/S. Niksun Electro-Infra Private Limited
Mahindra Electric Stores
metro electrical services
ASHWAMEDH ENGINEERS
MAYUR ELECTRIC SERVICES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .