SPECIAL REPAIRS TO BLDG NO P 10A AND P 16 AT NARANGI UNDER GE NARANGU

Amount

Demolition of cement concrete (unreinforced) n.exc. 15cm thick above or below ground level of any description including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4, type B0 with using 12.5mm graded stone aggregate as in wearing courses to receive floor tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles of size 300 mm x 200 mm x 6-7 mm thick on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over and including 10mm thick screed in CM 1:4 complete all as specified and directed.

Material and labour for non skid coloured tiles area of each tile exc 0.11 Sqm but n.exc 0.18sqm, 7mm thick as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item No 5 here in before but as in skirting/dado with and including over 10mm rendering in CM(1:4) complete all as specified as directed

Material and labour for non skid coloured tiles area of each tile exc 0.18sqm but n exc 0.38 sqm each 9 to 10mm thick as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item No 07 here in before but as in skirting/dado with and including over 10mm rendering in CM(1:4) complete all as specified as directed

S&F Vitrified ceramic tiles10mm thick light shade area of each tile exc 0.36sqm but not exc 0.42 sqm in floors, set and jointed and pointed in white or coloured cement to match over 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

All as per item No 09 here in before but as in skirting/dado with and over and including 10mm rendering in CM(1:4) complete all as specified as directed

S&F 18 to 20mm thick marble slab makarana Dongari rubbed and polished on kitchen plastforms , window cills and like in CM 1:4 including pointing in white cement 1:2 using marbal dust with admixture of pigment to mach with marbal shede over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

S&F machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick cement screed bed in CM 1:4 complete all as specified and directed.

S&F Kota stone slab 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm rendering in CM(1:4) complete all as specified as directed.

S&F in Repair Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets including 32 mm PTMT waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified & directed.

S&F in repairs 1 mm thick stainless steel plate rack of size 31”x24”x10” including fixing with rawal plug and screws incl waste coupling and pipe complete all as specified and directed. Make : Blue Star Cat No KPR-313 or equivalent of Nirali/Prayag

S&F in repairs Stop Valves 15mm fancy type Chromium plated with long shank and cup(concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed.

S&F in Repair Bib Taps 15 mm bore cast copper alloy fancy type Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (min weight 40 gms) complete all as specified and directed. Make : Polytuf/Prayag

Taking down cement plaster on brick or stone wall and roof in any description including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4(using water proofing compound as per manufacture instructions) and finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid sepertely

Supply only integral water proofing compound

Taking up or down steel tubing and connections of 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm bore complete all as specified and as directed.

Fixing only old GI tubing medium grade 15mm bore including new fittings laid in trenches or on walls complete including making good, complete all as specified and directed.

Fixing only old GI tubing medium grade 20 mm bore including new fittings laid in trenches or on walls complete including and making good, complete all as specified and directed.

S&F GI Tubing medium grade 15mm bore laid in trenches and as wall `complete including making good, cutting portion all as specified and directed.

S&F GI Tubing medium grade 20mm bore laid in trenches and as wall `complete including making good, cutting portion all as specified and directed.

Demolition of Reinforced cement concrete as in water tanks etc including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed

M & L for complete removal of existing wall surface and applying two coats of oil bound distempera over a coat of primer over 1.50 mm thick (minimum) wall care putty complete all as specified and directed

Preparation Newly plastered surface and applying two coat of oil bound distemper over a coat of primer over 1.50 mm thick (minimum) wall care putty on walls all as specified and directed.

M&L for complete scrapping of existing treatment of wall, prepration of old surface of wall etc and applying two coat of exterior emulsion paint ( 1st quality) over a coat of exterior primer over 1.5 mm thick wall putty on walls all as specified and directed.

M&L for preparation of new plastered surface of wall etc and applying two coat of exterior emulsion paint (1st quality) over a coat of exterior primer over 1.5 mm thick wall putty complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & Grill without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters without taking off shutters from the frame) complete all as specified and directed.

S&F pressed steel frames of size 125x60mm made from 1.25 mm thick sheet for doors with one or more rabates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F pressed steel frames of size 105x60mm made from 1.25 mm thick sheet for doors with single rabate incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for filling of hollow steel frames of any size complete all as specified and directed.

S &F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed.

S&F Factory Made Solid Panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded sections 150 mm size complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S & F 100 mm long Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for anodized aluminium sliding glazed window shutter (double leaf glazed window shutter and single leaf mosquito proof shutter each in single frame work) without sash bar with anodized aluminium shutter of section 40 mmx20mmx1.10mm thick and window frame/ chowkat of section 92.00 mmx29.50 mmx1.20 mm thick including necessary jointing cleats, glazing clip, rubber packing, snap bending, screws, handle, tower bolts and locking arragement etc and encluding 4mm thick sheet glass, tinted quality on panel and stinless steel wirecloth for mosquito proofing, 0.36 mm nominal dia and avarage width of aperture 1.40 mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and directed.

S&F framed work such as grills , gratings,etc with ends of bars shouldered and /or riveted, or froged into spikes, framed guard bars, barred iron doors, ladders, and similar work conforming to Fe 290, Gde E165 complete all specified and as directed.

S&F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for two coat of synthetic enamel paint on old steel surface over 10 cm with or girth incl preparation complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc. THe main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to from 600x600mm grid and painted with two coats of OBD over a coat of primer before installing it on the grid all as specified and directed.

S&F in repairs 20 mm dia anodised aluminium chromium plated tubular curtains rod with fixing brackets, stops, rollers etc. complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness, including nanital or similar patternroof coverings complete all as directed.

Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based plain steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in ridges fixed with self tapping screws complete all as specified and directed.

M&L 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 stone aggregate) in plinth protection, finished even and smooth without using extra cement with and including all necessary formwork and to divide the area in panels and finishing exposed edges fair and rounding or chamfered with and including filling the joints with mastic filling, complete all as specified and as directed.

M&L 50 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base and sub floors complete all as specified and directed.

M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Mild steel TMT bars 8 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips and complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (12.5mm graded agg) as in lintels upto 1.50m clear span, cills , steps, copings , bed blocks, band, shelves/ chajjas, manhole covers etc with slightly rounded or chamferred angles or edges ( precast or casted in situ) all specified and as directed incl use and waste of form work for rough finished surfaces of concrete complete all as specified and directed.

Dismantling of brick work built in cement mortar incl all quoins, arches, pillar etc and complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 and complete all as specified and directed.

Taking down carefully old unserviciable copper/aluminium point wiring (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fan, Exhaust fan/wall fan including connection wires carefully removal to store in safe custody and refixing the same in original position after servicing including ball bearing, bush etc ( if required) and painting with synthetic enamel paint by spraying incl fillint cavity complete all as directed by Eng-in-charge

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLSH quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories including suitable module PVC modular box or pressed steel modular boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint both internally and externally including cover plate with frame for concealed in walls/ceiling etc and including cutting chases for conduits and sinking for boxes and making good to disturbed surfaces, including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point/fan point/bell point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per item No 70 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 70 above but one socket outlet 3/5 pin 6 Amp on independent board.

All as per item No 70 above but one socket 5A 3 pin socket outlet independent board but below the switch board of light points in the same vertical line.

All as per item No 70 above but one light point controlled by two way modular switch .

All as per item No 70 above but with 2.50 sqmm cable for 3/5 pin 15 Amps switch socket outlet with PVC unsheathed single core multi- stranded copper cable of size 2.50 sqmm green in colour as earth continuity conductor in independent board complete all as specified.

All as per item No 70 above but with 4.00 sqmm cable for 3/5 pin 15 Amps switch socket outlet (Power point) with PVC unsheathed single core multi- stranded copper cable of size 4.0 sqmm green in colour as earth continuity conductor in independent board complete all as specified.

Supply and fixing of modular switch one way 6 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket outlet 3/5 pin 6 Amps 230/250 volts 2 module complete all as specified/ directed.Make: Legrand/L&T/Schneider

Supply and fixing of modular switch one way 16 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket 6/16 Amps, 230/250 volts, 3/5 pin combined, 2 module complete all as specified and directed.Make: Legrand/L&T/Schneider

Supply and fixing of modular fan regulator 120 W ,6 amps 2 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

S&F Plug and socket DB with industrial socket suitable for 3P+1N+1E complete with MCB FP 63 A Model DX3 and plug in socket 5 pin suitable for 415 volts complete all as specified and directed . Make : Havells/L&T/Legrand

S&F 34 watt LED recessed mounted luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling and fixture size in mm (LxWxH) 595x595x70 complete all as specified and directed. Make : Havells Model-PLUTONEO2x2PLR34WLED840S/ PLUTONEO2x2PLR34WLED857S or equivalent model in make of Philips/ Crompton/Bajaj

Supply and fixing ceiling rose, 3 terminal PVC/polycarbonate, isolated body complete all as specified and directed. Make : Anchor/SSK/Havells

S&F Modular lamp holder, insulated body, with back plate for batten fitting complete. Make of holder- Havells/anchor/Legrand,

S&F decorative hexagonal bulk head LED luminarie with 10 Watt, 6000K with IP-66 protection including connection complete all as specified and directed. Make: Havells Model No HEXAFT10WLED857SSYMBOPC or its equivalent make and model Philips/CG/Jaguar

S&F batten for LED box type fitting pre-wired including LED tube 1 x 20W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as directed. Make: Jaguar Model LGLZ01X020XC/ LGLZ01X020XW/LGLZ01X020XN or Havells Cat No LUMILINEPLUSBS20WLED865SPCSS or its equivalent make and model Philips/CG/ Havells

Supply and fix LED box type fitting pre-wired including LED tube 1x10W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable and fix on PVC block complete all as directed. Make:- Jaguar Model-LGLZ01X010XC or Make:- Havells Model-LUMILINEPLUSBS10WLED865SPCSS or equivalent model of make Philips /GE/Cromptonor equivalent model of make Philips /GE/Crompton

S&F wall decorative fitting durable plastic body and designer mesh in gold finish suitable for 9W LED lamp of B-22 including lamp of 9Watt LED warm light with necessary connection complete all as directed and specified. Make: Havells Cat Part No LHFOECE11Z1B014 or equivalent make Jaguar/CG

Supply and fixing Distribution board SPN , 240 volts single pole and neutral ,double door, sheet steel enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted on wooden board with electrical connection complete all as specified and directed including taking down old one. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Schnieder/GE/Legrand.

Supply and fix in repairs MCCB Distribution board, VTP&N , loadline , double door, ,sheet steel, enclosure powder coated with 250 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in wall with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDLVDRWGOFO04 or equivalent in Legrand/Schnieder/GE/C&S/Legrand.

S&F LED recess mount downlighter 18 W with pressure die-cast aluminium heat sink and PC difuser in white powder coated finish with integrated driver, Make- Havells EDGEPRO, Cat Part No-EDGEPRORDDLR18WLED857S Or equivalent Jaquar/Bajaj/CG

Supply and fix MCCB four pole , 415 Volt,100 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .Make:- Make:Legrand /Siemens / Schneider / L & T/ABB.

Supply and fix MCB, SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Legrand /Siemens / Schneider / L & T/ABB .

Supply and fix MCB TPN , 415 Volt, 63 Amps complete all as specified and directed .Make:- Make: Legrand /Siemens / Schneider / L & T/AB.

Supply and fix MCB SPN , 415 Volt, 40 to 63 Amps complete all as specified and directed .Make:- Make: Legrand /Siemens / Schneider / L & T/ABB.

Supply and fix MCB, SPN, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Legrand /Siemens / Schneider / L & T/ABB .

M & L for Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall/ceiling alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM

M&L LED building secruity luminaries 48 Watts WSPD epoxy powder coated pressure die cast aluminum housing with wheatherproof gasket for LED's and control gear compartments, pressure die cast aluminium frame with heat resistant toughened clear glass fixed with SS screws LED Specification: CREE LED/Equivalent, Colour temp - 5700 K +/- 300 K Lens,,IP-66,Lumen efficiancy >100 lm/w,surge protection 4kv internal (Built-in) with twin core conductor complete all as directed including testing on completion. Make: Havells CAT No. ENDURAPEARNEOSL48WLED757SASYTOPC or equivalent of Philips/Wipro/CG.Note-Driver of LED street light should be same as make approved.

M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and as directed.

S&F in repair/replacement LED 25 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 63 mm complete all as specified and directed.Make -Havells ,cat no- ENDURAPEARLSL25W757SASYTOPCMP. or equivalent make bajaj ,crompton etc.

M&L in repairs LED building security luminarie 48 watts WSPD epoxy powder coated pressure die cast alumnium housing with weather proof gasket for LEDs and control gear compartments pressure die cast alumnium frame with heat resistant toughened clear glass fixed with SS screws LED specification CREE LED / Equivalent colour temp 5700 K +/- 300 K Lens IP-66 Lumen efficiency >100 im/w surge protection 4kv internal (Built in) with twin core conductor complete all as specified and directed including testing in completion. Make: Havells Cat Part No ENDURAPERANEOSL48WLED757SASYTOPC of equivalent of Philips / Wipro/CG. Note: Drive of LED street light should be same as make approved.

M&L for building security light bracket made out of 40mm bore medium grade GI pipe with two sets clamps with nuts and bolts, bend to shape for fixing building security light luminarie length of GI pipe shall not be less than 2.0 mtrs complete all as specified and directed

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and taking down old one and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

U S CONSTRUCTION

M/s JK Jangid and Company

LAXMI CONSTRUCTION

M/S RAJ RANI BUILDERS

M/S SEWAK SINGH

BALEN DEWAN

GOPAL AGARWALA