WBPWDTE/AE/BMCESD/NIQ-10/Q of 2025-2026

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, with drop Concealed type if reqd as per direction of EIC to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 10 mtr

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. -25mm

Supply & Fixing 240 V, 1 x 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150 x 100 x 65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 1nos 6A & 1nos 20A plug socket with separate 1nos 6A & 1 nos 20A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F200 x 150 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex / Havells/ KEI / Gloster /approved by EIC) in 20mm / 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 2.5 sqmm + 1 x 1.5sqmm (for Power plug)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S 2.5 sq mm

Supplying & Fixing angular holder (Anchor) on 3" wooden double round block incl. S&F 9 Watt LED lamp (Make Philips / Wipro / Bajaj / Crompton/ Havells / PWD Approved ) as per direction of EIC

Supply & Fixing 50 Hz, 24 V DC Red/Blue Plastic Jigo JG LTE 1103J Revolving Warning Light of commercial type complete with all accessories as per direction of EIC. (Red - 4 nos, Blue - 4 nos)

Supply & Delivery of 4 feet single commercial LED type fluorescent light fittings complete with all accessories similar to Philips make cat No. TMC 502 1xT-LED 22 W with Master LED Tube lamp of 1200 mm , MAS LED tube 18W 2100 CM 865T8(PC) corresponding to Wipro / Bajaj / Crompton/ Havells / PWD approved as per direction of EIC

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply of 250 V 50 HZ high flo oscillating type metal body Wall Bracket( Tornedo - 2 ) fan operated by pull cord switch with inbuilt regulator ( Make -CG/ Orient/ PWD Approved) 18" (450 mm).

Fixing of Wall Bracket on wall with necessaryS&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length etc to complete the installation and mending good the damages as per direction of EIC

Supply of exhaust fan (Make -- EPC, Heavy duty/equivalent make) of following sizes as per direction of EIC. 30 cm (12"), 1420 RPM, 80W

Fixing only exhaust fan after making hole in wall and making hole in wall good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia. 30 cm (12")

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 30 cm (12")

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc as per G.S.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Overhauling & shifting from the existing pogition, Re-installation, Testing & commissioning of 1.5/2.0 Tr. Split type AC both indoor/ outdoor unit incl. S& F of 40 X 40 X 5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the instn as per direction of EIC.

S& F laying of - (i) gauge copper pipe 5/8" 0.7 mm thick for suction (ii) copper pipe 1/4" 0.6 mm thick for discharge (OEM make) with 9 mm thick thermal insulation foam nitrile / rubber / K Flex / Accroflex with max saddling with max 1 mtr distance both for suction & discharge pipe and mending good the holes & damages as directed by EIC. (extra length for distance of ODU & IDU exceed 3 mtr.)

S& Laying 3 core 2.5 sqmm PVC insulated & unarmoured copper cable (make-- Finolex/Havells/KEI) for 1.5/2 Tr. Split AC machine (extra length for distance of ODU & IDU exceed 3 mtr.) with max saddling with max 1 mtr distance as per direction of EIC.

S & F of flexible PVC high quality water carrying pipe of proper size for draining water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC.

Supply & Fixing of GI grill work by 12 x 12 mm GI bar with necessary welding ,screws and lugs with each other 250 x 40 x 40 mm GI angle with necessary making of frame structure with necessary one no hinged arragement with hatch bolt arrangement with shutter lock (3 Key) 2 nos atleast for each installation with necessary grouting arrangement on wall by anchoring by 250 x 40 x 40 mm MS angle at least 5'' on wall incl. Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design 19 mm mesh as per direction of EIC. Grill wt. above16 Kg./ sq. mtr. (For the Panel beside the gate of G&O building & corridor of SNCU)

Supply & Fixing 22 SWG ACP Board (Make - Aludecor/direction of EIC) complete with linkage, levers, fittings, supports incl. all accessories any other item required to make the system complete as per direction of EIC. (For the UPS of Labour room, SNCU, PICU & G&O OT)

Overhauling & shifting from existing position, Re-installation, testing & commissioning of Green Model Cooler cum Purifier with 120 Ltrs storage capacity. with external dimensions 750 mm x 570 mm x 1350 mm ( ± 10% ) , (W x D x H ) , Operating Power Supply - 230 ± 10 % v AC, 50 Hz, running current in amps (max) - 4.0 ± 10 %, Power in watts-850 ± 10 %, Water Storage tank capacity-120 ltr, capacity with comfort level water outlet temperature at 17 deg c-60 lph, refrigent-Rl34 (Green Gas) 22, as per direction of EIC.

Supplying, fitting and fixing PVC pipes for underground work of approved makeof Schedule 80(mediumduty)conforming to ASTMD 1785and threaded to match with GI Pipes as per IS:1239(Part-I).with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads,cutting trenches upto1.5 metre below surface in all sorts of soil and refilling the sameas directed complete in all respect.(Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC -25 mm dia

Supplying , Deliverying , fabrication of Water Purifier Stands with MS Angle.The Stands is constructed by MS angle iron frame of 4 nos 50 x 50 x 6 mm size approx length (4 Nos 800 mm each ) and hight 4 x 600 mm each (leg) .The complete stands by proper placing and welding by MS angle iron frame with cutting ,welding , grinding and finished by Expert welder with expert technician and painting the Stands by two coats of RO primer after scrapping by emery paper for smooth finish and complete the installation as per direction of EIC.

Thoroughly servising of Glow sign board opening ACP board cleaning inside and outside of the sign board incl. checking letter, LED Strip (12V DC, 2 watt) including S&F necy. connection by single core PVC copper wire for uniform lighting the above board to be painted after preparing surface of both inside & outside MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints and repairing of all supports of glow sign board such as damaged angle, back side winches etc. incl. necy. ctting, weilding, grinding work with necessary fixing arrangement as per direction of EIC. Maternity OT (8' x 2')

Labour Room (6' x 2')

Supply, Delivery and installation & testing of LED Power Supply Adapter (SMPS) 50Hz, 300-350W, 100V-240V AC to 12V DC voltage, 30A output supply for LED strip Lights/LED module for Glow sign board. Make - Samsung/Hisen/any similar make compatible to Samsung/Hisen LED light modules recognised by EIC.

One Colour Water proof 12V, 3 Module LED strip for lighting Glow sign board. Make - Samsung/SAMAES/INVENTRO

M/S. N.C. HORE (BID ID -6652293)

TAPAN ELECTRICS (BID ID -6665870)