Tirupathur District Construction of Multipurpose Building at Annandapatti in Annandapatti Panchayat at Tirupathur Block Under MLACDS 2025 26

Amount

Construction of Multipurpose Building at Annandapatti H/O Annandapatti Panchayat

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete comply

Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground moulded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X

Below ground level

column

roof slab, lintel, beam

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wh

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thicknes

Finishing top roof mix one course machine pressed tiles of size 23 cm x 23 cm x 2 cm approved qty with,CM.1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors.

Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supply and delivery of Steel Doors and Windows

Door size 1.20 x 2.10 m

Door size 0.75 x 2.10 m

Window size 1.20 X 1.30 m

Labour charges for fixing doors along with frames in position etc complete

Labour charges for fixing doors along with frames in position etc complete

Labour charges for fixing windows and ventilators along with frames in position etc complete

Supplying and fixing of 110mm dia PVC pipe for rainwater down fall pipe including cost and labour charges etc.,complete.

Providing for Electrification Arrangements

Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

Light Point SD 18

Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

Fan Point SD 110

Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

Plug Point SD 36

Supply and fixing of water tight Bulk head fitting with guard suitable for

Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains

25 mm GI Pipe for EB Service SD 70

Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main

Service Wire

Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main

DPI Switch

Supplying and fixing of 1200mm(48")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp

Ceiling Fan

Providing for Water Supply Arrangments

32 mm PVC Pipe 10 Ksc

32 mm PVC Bend

32 mm PVC Elbow

25 mm PVC Pipe 10 Ksc

25 mm PVC Bend

PVC Screw Down Tap Heavy Type 20mm dia

1000 Lit's HDPE Tank

Rain Water Harvesting Structure

Name Board Charges

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

K.Raghu (BID ID -1507265)