SPECIAL REPAIRS TO BLDG NO GB 10 AND SPECIAL REPAIRS TO BLOCK NO 72 OF MOHIT ENCLAVE UNDER GE BELGAUM

Amount

Dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings including ridges etc. in roofing and removing rubbish off the premises and old unserviceable asbestos cement sheet taken as credit completer. all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed complete all as specified and as directed .

Description all as per item no :03 here in before but except timber

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , un framed work and removing rubbish off the premises and old unserviceable fillets, rails, posts, rafters, purlins, etc.of any description taken as credit complete. all as specified and as directed.

Material and labour for Second class hard wood plain fillets, rectangular in section, wrought secured with nails of sectional area exceeding 13 and not exceeding 25 Sqcm complete all as specified and as directed

Description all as per item no :06 here in before but except battens,any of the foregoing and refixed in old position.

Material and labour for Preparing surfaces of wood and wood based materials ,new or old of any description and girth and treated with two coats of creosote oil complete all as specified and as directed

Material and labour for Cement Concrete Eterna Rusted Red tiles of size 420mm x 330mm x 12 mm thick tiles in roofing. Interlocking at side joints laid dry . complete all as specified and as directed . Note : Make of Tile : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Rusted Red Ridge Cap of size 330mm x 207mm x 249mm x 15 mm thick ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note : Make of Ridge cap : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Rusted Red Hip Starter of size 360mm x 210mm x 17 mm thick ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note : Make of Hip starter : Pioneer/ Monier

Material and labour for Cement Concrete Eterna Rusted Red three way cap / toplex of size 351mm x 160mm x 429mm x 15 mm thick ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note : Make of three way cap : Pioneer/ Monier

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded stone aggregate in coping/bed plates eves filling in roof including necessary steel form work complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails and removing rubbish off the premises and old unserviceable timber boarding taken as credit complete. all as specified and as directed.

Material and labour for 4 mm thick Aluminium composit panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick alluminium alloy PERALUMAN-100 (AIMG1-NS41) complete with all necessary sub-structures, anchors,hindware and fittings to provide a total installation, fixed to existing wooden / steel members with necessory frame work with screwing and scaffolding all as per manufacturers instructions including dismantling of old unserviceable panel of any description and taken as credit complete all as specified and as directed. Note: (i) Measurement shall be taken flat as fixed without any allowance for laps, etc. (ii) Make of Aluminium composit panel : Alstrong/ Aludecor/ Alucobond/ Euroband

Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc. and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter trapezodial shape Gde-I,150mm dia complete all as specified and as directed . Note : Make of PVC eaves gutter : Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches of floor or fixed to walls complete all as specified and as directed. Note : Make of PVC (SWR) pipes : Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed. Note : Make of PVC (SWR) bends : Finolex/Supreme/Prince (ISI MARKED)

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness and description including cover fillets and taken as credit complete all as specified and as directed .

Supply and fix Suspended false ceiling system with 16mm thick mineral fibre acoustical MINA TUFF EDGE TILES (MIRO LOCK) ,white ,fibre performance Class-I (BS 456,Part 6&7) ,with bio coating on the exposed face of tiles,module size 600mm x 600mm, laid on 15mm thick SILHOUTTE EXPOSED GRID system,with minimum load carrying capacity of 11.68 Kg/Sqm,white/black colour including dismantling of existing false ceiling system of any description and type and taken as credit including making good the disturbed surfaces to match with the existing surface complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints,hacking for key ,scrubbing down with water etc and removal of debris off the premises complete all as specified and as directed .

Material and labour for Rendering 10mm thick in cement mortar 1:6 on PCC Block or stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces in two layers , 5mm top layer mixed with water proofing compound over 10mm thick rendering on external wall surfaces complete all as specified and as directed. Note : Water proofing compound will be measured and paid seperately.

Supply only water proofing compound. Note:Make:Impermo/Cico/Roff

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of Oil Bound Distemper over a coat of primer and a 1mm thick wall care putty complete all as specified and as directed .

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed. Note :Make of exterior emulsion paint : (Apex Ultima - Asian paint)

Material and labour for Complete removal of old plastered/unplasterd surfaces of walls with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and brooming down and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer and a 1mm thick wall care puty complete all as specified and as directed

Material and labour for Complete removal of old plastered/unplasterd surfaces of walls with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and brooming down and appyling two coats of exterior emulsion paint over a coat of water basedprimer complete all as specified and as directed. Note :Make of exterior emulsion paint : (Apex ultima - Asian paint)

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of existing precast concrete articles of any description and removal of rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced ,above or below ground level and removal of debris off the premises complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Plain cement concrete type C2 1:3:6 ( using 40 mm graded stone aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement.including necessary steel form work complete all as specified and as directed.

Material and labour for Plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) 25mm thick sub base of floor as in levelling course inclusing necessary steel form work complete all as specified and as directed. .

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile laid over and including cement screed bed or bedding layer of mortar in CM 1:4, 15mm thick complete all as specified and as directed. Note : Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany

.Description all as per item No 35 here in before, but cut to suitable size in skirting/dado laid over and including rendering 10 mm thick in CM 1:4 on fair faces of brick work/concrete surface as in backing coat of skirting, dado etc

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note : Make of Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Matt finished Coloured Glazed ceramic tiles in vertical surface of size 4'x2'x10 mm thickmm thick set and jointed in neat adhesive with cement slurry and pointed in epoxy grout with white or coloured in skirting/dado over and including rendering 15 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed . Note : Make of Glazed Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Coloured Glazed ceramic tiles in vertical surface 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado laid over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed . Note : Make of Glazed Ceramic tile :Johnson/Kajaria/Somany

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed and removal of debris off the premises complete all as specified and as directed .

Material and labour for 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/ wash basin platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for Granite slab in dado or skirting (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement andadmixture of pigments to match the shade of granite stone including grinding and polishing complete with a backing coat in CM 1:4, 15mm thick. complete all as specified and as directed.

Material and labour for External coloured cement concrete designer tiles of size 20cmX20cmX25mm thick set,jointed and pointed in neat cement slurry with grey cement and pointed with white cement and admixture of pigments to match the shade of tile as in pavement/hard standing etc .complete all as specified and as directed.

Material and labour for Plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) 50 mm thick sub base of floor as in levelling course inclusing necessary steel form work complete all as specified and as directed. .

Material and labour for Rubber Coated Chequered cement concrete tiles of size 30cm x 30cmx 25mm thick, with grey cement and pigments, with glossy finish on top set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed.

Taking down chowkats with shutters of area exc 1.50 sqm but n exc 4 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Taking down chowkats with shutters of area n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Taking down shutters of any description of size n exc 1 sqm each and refixing in the same opening complete all as specified and as directed.

Taking down shutters of any description of size exc 1 sqm and n exc 2 sqm each and refixing in the same opening complete all as specified and as directed.

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, glazed and skelton shutters open rebated and prepared to receive glass gauze etc edges of framing plain ,chamfered or rounded , fitted with cut and mitred beads rebated sash bars any numbers for securing gauze etc divided into squares , size of members of shutters as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and as directed.

Description all as item No 52 here in before but window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24(b).

Material and labour for solid PVC Door Frame of Size 50mm x 47mm out of 5mm wood grain printed PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing . complete all as specified and as directed.

Material and labour for Factory made solid panel PVC door shutter 30mm thick (Style) as per IS-4020 consisting of frame made out of MS tube of top and bottom rails.MS frame shall be covered with heat moulded plain colourPVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings mentioned in SSR Part-II (Rates) 2020 complete all as specified and as directed.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.

Supply and fix Stainless steel butt hinges medium weight 100mm size complete all as per specified and as directed.(ISI MARKED)

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed..(ISI MARKED)

Description all as item No 59 here in before but of size 75 mm

Supply and fix Helical door spring MS 300mm long ordinary rat tail pattern spring including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. .(ISI MARKED)

Supply and fix 100mm long extruded section aluminium alloy anodised handles fabricated typecomplete all as specified and as directed.Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated typecomplete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed.Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed. Note : Make of Aluminium anodised sliding door bolt : Classic/Crown/Adarsh . .(ISI MARKED)

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Supply and fix Mild Steel work as in hold fast of size 25x3 mm conforming to Fe-290 Gde- E-165. complete all as specified and as directed.

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Material and labour for Powder coated aluminium frame work as in doors, partitions and windows using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc including dismantling of existing aluminium frame of any description and type and taken as credit complete all as specified and directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets.

(iii) Particle board/ glass panels shall be measured and paid separately. (iv) Make of Aluminium section :Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 micron

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item no :74 here in before but 20 mm dia bore .

Material and labour for Cutting, chases for concealed water tubing and making good in CM 1:3 cutting not exceeding 10 cm girth in stone /concrete block or slab wall complete all as specified and as directed.

Supply and fix Unplasticised PVC pipes of 15mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Description all as per item No 77 here in before but 20mm dia bore of pipe.

Supply and fix in repair Vitreous china water closet, Pedestal type, white,cascade model with flushing cistern(12.50 Litres capacity) ,seat cover etc including 32 mm dia PVC flush pipe, white seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc.complete all as specified and as directed. Note :Make of water closet :Jaguar/Hindware/Marc

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make of PVC connection : Prayag /M/S Shakthi Industries

Supply and fix PVC connections 15 mm size with PTMT nuts450mm long completeall as specified and as directed. Note :Make of PVC connection : Prayag /M/S Shakthi Industries

Supply and fix in repairs CP brass Single lever high flow diverter concealed body 3 inlet with button assembly,cartridge sleeve without exposed parts , screwed down for 15mm bore UPVC pipe complete all as specified and as directed. Note :Makeof diverter: Jaquar /Hindware/Marc

Supply and fix in repairs CP Brass Single lever 3-inlet divertor exposed parts kit consisting of operating lever,wall flange and button complete all as specified and as directed . Note :Makeof diverter kit : Jaquar /Hindware/Marc

Supply and fix in repairs CP Brass Spout operated bib tab 15 mm dia with wall flange complete all as specified and as directed . Note :Makeof Bib tap : Jaquar /Hindware/Marc

Supply and fix in repairs Stop valve fancy type brass chromium plated with long shank and cup (concealed type) screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed.Note :Makeof stop valve : Jaquar /Hindware/Marc

Supply and fix in repairs Brass chromium plated overhead shower of size 150x150mm with swivel joints andshower arm 450mm long with flange, any size, fixed to 15mm bore UPVC pipe, fixed in repairs complete all as specified and as directed. Note : Make of over head shower : Jaquar /Hindware/Marc

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts and bolts, fixed in repairs complete all as specified and as directed .Note :Make of corner glass : Jaquar /Hindware/Marc

Supply and fix in repairs Table top wash basin Vitreous China of size (600mm x 450mmx150mm),Square including cutting for and pinning in ends of brackets or erecting stand with bottle trap stainless steel etc complete all as specified and as directed. Note :Make of wash basin : Jaquar /Hindware/Marc

Supply and fix in repairs 2 way Pillar cock single lever of 450mm long fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Note :Make of 2 way Pillar cock : Jaquar /Hindware/Marc

Supply and fix Brass, chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed. Note :Make of Toilet paper holder: Cat No.ACN 1151N of Jaquar /Hindware/Marc

Supply and fix in repairs Soap dish, vitreous china , white /Stainless steel of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed. .Note :Make of soap dish : Jaguar /Hindware/Marc.

Supply and fix 15 mm bore dia Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. Note :Make of Bib Tap: Jaquar /Hindware/Marc

Supply and fix Health faucet , brass chromium plated with 1m long flexible PVC tube and wall hook complete all as specified and as directed. Note Make of health faucet: Jaquar /Hindware/Marc

Supply and fix Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Note Make: Jaquar Cat No. CAN-CHR-1111N or equivalent price and specification of Hindware/Marc

Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. Note : Make of 2 way Bib tap : Jaquar /Hindware/Marc

Supply and fix PVC (SWR) floor trap 75mm dia outlet ,plain with grating including jointing with solvent cement . complete all as specified and as directed . .Note : Make of PVC Floor trap : Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) for WHB complete all as specified and as directed. Note :Make of soap container : Prayag /M/S Shakthi Industries

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches. complete all as specified and as directed . Note : Make of PVC (SWR ) Pipe: Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make of PVC (SWR ) Pipe: Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed. Note : Make of PVC (SWR ) Bend: Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.. Note : Make of PVC (SWR ) Pipe: Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed. Note : Make of PVC (SWR ) Bend: Finolex/Supreme/Prince (ISI MARKED)

Material and labour for PVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement complete all as specified and directed. Note : Make of PVC (SWR ) Gully Trap: Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) vent cowl. complete all as specified and as directed .Note : Make of PVC (SWR ) vent cowl: Finolex/Supreme/Prince (ISI MARKED)

Dismantling boarding of any description fixed in any position with nails and any thickness and taken as credit complete all as specified and as directed .

Material and labour for Particle board,18/19 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cub board shelves/cabinet works complete all as specified and as directed . Note :Make of Particle board :Kitply/Green ply/Century Ply wood (ISI MARKED)

Material and labour for Decorative laminate type 1 , 1 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions. complete all as specified and as directed

Supply and fix in repairs Stainless steel grating of 100mm Size (ISI MARKED) complete all as specified and as directed

Supply and fix in repairs Stainless steel curtain rods of Gde-I quality ,20 mm dia with fixing brackets, stops and rollers etc as approved by GE complete all as specified and as directed .

Supply and fix in repairs Stainless steel Knob of Gde-I quality ,35 to 40mm dia suitable for curtain rod as approved by GE complete all as specified and as directed . (ISI MARKED)

Supply and fix Plain galvanised mild steel sheeting with grade of zinc coating 275, 0.8mm thick, in ridges,hips, valley gutter, drip and straight flashings at expansion joints including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed .

Material and labour for floor door stopper of brass body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring ,fixed in door complete all as specified and as directed.(ISI MARKED)

Description all as per item No 114 here in before but fixed in repairs including taking down existing door stopper of any description and taken as credit complete all as specified and asdirected.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 80mm thickness, with grey cement , M-35 grade complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation, complete all as specified and as directed.Note:consolidated thickness of sand cushioning will be measured and paid for payment .

Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note :Make of Glass :Saint Gobain/Modi Guard/Gold Fish

Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.. Note :Make of Glass :Saint Gobain/Modi Guard/Gold Fish

Disconnecting existing tanks exc 250 ltr and n exc 500 ltr, setting aside (or lowering if required) for repairs,cleaning etc and hoisting if required. Reconnecting and re-fixing in position complete all as specified and as directed..(cleaning and repairing etc shall be measured separately).

Re-fixing old UPVC/GI tubing 15mm bore in new or old position (wall, ceiling and floor etc).

Description all as per item No 121 here in before but 20mm dia bore of pipe.

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm and providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm incl min 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm and on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm , complete all as specified and as directed

Material and labour for Rendering 10mm thick in cement mortar 1:3 on concrete surfaces with water proofing compound and finishing the surface even and smooth without using extra cement, complete all as specified and as directed

Demolition of cement concrete in any description and in any position including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for Providing Plain Cement Concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete completeall as specified and as directed.

Material and labour for Providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work completeall as specified and as directed.

Material and labour for Reinforced cement concrete Type B1,1:2:4 using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc completeall as specified and as directed.

Material and labour for Reinforced cement concrete Type B1,1:2:4 using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts completeall as specified and as directed.

Material and labour Reinforced cement concrete Type B1,1:2:4 using 20mm graded stone aggregate in chajjas on walls, as in Shelves completeall as specified and as directed.

Material and labour for Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, and similar works for rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for SteelFormwork to sides of pillars, posts, struts, piers, columns and stanchions, and similar works for rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for SteelFormwork to sides and soffits of roof beams, tie beams, lintels, and similar works for rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for Steel formwork to,rough finished surfaces of flat concrete, chullah hoods, chajjas,troughs and similar items including edges,etc complete all as specified and as directed.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clipscomplete all as specified and as directed.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clipscomplete all as specified and as directed.

Material and labour for 100mm thick PCC(1:2:4) type B1,(using 40mm graded stone aggregate) and top surface finished even and smooth with using extra cement complete all as specified and as directed.

Supply and fix in repair Galvanised steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with GI wire staples in panel of joinery complete all as specified and as directed.

Supply and fix Pedestal type wash basin Vitreous China of size 550 x 450mm, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.Make: Cera or equivalent model in Hindware, Parry ware.

Supply and fix in repairs Pillar tap fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make: Cera, JAQUAR, Johnson/ ESS ESS/ ARK.

Supply and fix in repairs tubular towel rail 20mm dia brass chromium plated D type 60cm long between flanges fixed with CP screws complete all as specified and as directed.

Supply and fix in repairs Vitreous china water closet, Pedestal type, white, including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc.complete all as specified and as directed.

Supply and fix in repairs PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe etcincluding brackets complete all as specified and directed.

Supply and fix PVC grating of 150mmSize (Paryag) complete all as specified and directed.

Dismantling of water tank of any description of capacity exc 500ltr and n exc 1000 ltr and taken as credit complete all as specified and directed.

Supply ,erect and connect 1000 litres capacity Rotational moulded Polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) Double layered ,hoisted and connected to pipeline inlet ,outlet and fixed in position and provision of 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed . Note :(i)Make of PVC water tank : Sintex/Polycon/Vectus (ii) Make of PTMT ball valve : Prayag/M/S Shakthi Industries

Dismantling of old sub main wiring of of aluminium conductor cable of sizes 2.5 and 4 sq.mm and taken as credit complete all as specified and as directed..

Material and labour for Point wiring with FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and including PVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system and provision of green coloured FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with white colour cover plates and all accessories for mounting modular type switches, sockets, fan regulators, bell pushes etc. for One light point controlled by one switch 1 way and taking down old unserviceable point wiring from existing surfaces and taken as credit complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 148 here in before but for one call bell point controlled by one bell push

All as described in item No. 148 here in before but for One ceiling fanpoint controlled by one switch and regulator

All as described in item No. 148 here in before but for One exhaust fanpoint controlled by one switch .

All as described in item No. 148 here in before but for One light point controlled by two 2 way switches.

All as described in item No. 148 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 148 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 148 but wiring with 2.5 SqmmFRLSH PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLSH PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Material and labour for Point wiring with FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and green coloured FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly including provision of suitable size of modular metal surface box fixing in wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc for One light point controlled by one switch 1 way and taking down old unserviceable point wiring from existing surfaces and taken as credit complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

All as described in item No. 156 here in before but for One fanpoint controlled by one switch .

All as described in item No. 156 here in before but for One exhaust fanpoint controlled by one switch

All as described in item No. 156 here in before but for call bell point controlled by bell push

All as described in item No. 156 here in before but for one 3 pin socket outlet, on the same board socket 5 Amps point.with other switches withFRLSH PVC copper cable of size 1.5 sqmm

All as described in item No. 156 here in before but for one 3 pin socket outlet, for independent socket 5 Amps point.

All as described in item No. 156 here in before but for one light point controlled by two, two way switches.

All as described in item No. 156 but wiring with 2.5 SqmmFRLSH PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLSH PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly fixed in wall/ceiling complete all as specified and as directed.

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Note :Make -Anchor (ROMA) /Legrand/CONA

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC two way, complete all as specified and as directed. Note :Make -Anchor (ROMA) /Legrand/CONA

Supply and fix in repair Modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and directed. Note: Make -Anchor (ROMA) /Legrand/CONA

Supply and fix Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module .complete all as specified and as directed. Note : Make -Anchor (ROMA) /Legrand/CONA

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (ROMA) /Legrand/CONA

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Note :Make : Anchor (ROMA) /Legrand/CONA

Supply and fix call bell ding dong AC 230 volts, complete all as specified and as directed. Note : Make : Anchor (ROMA) /Legrand/Rider

Supply and fix PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Note :Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repair Modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and directed. Note :Make : Anchor (Roma)/Legrand/Rider

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 1.50 Sq mm drawn through and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories and Provn of one run of 1.50 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly and taking down old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 1.50sqmm and one run of 1.50 sqmm and one PVC conduitwill be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLSH PVC insulated unsheathed multi-stranded copper conductor cables of size 2.50 Sq mm drawn through and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories and Provn of one run of 2.50 sqmm FRLSH PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly and taking down old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 2.50sqmm and one run of 2.50 sqmm and one PVC conduitwill be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLSH PVC insulated unsheathed multi-stranded copper conductor cables of size 4.00 Sq mm drawn through and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories and Provn of one run of 4.00 sqmm FRLSH PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly and taking down old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 4.00sqmm and one run of 4.00 sqmm and one PVC conduitwill be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLSH PVC insulated unsheathed multi-stranded copper conductor cables of size 6.0 Sq mm drawn through and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories and Provn of one run of 6.0 sqmm FRLSH PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly and taking down old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 6.0sqmm and one run of 6.0 sqmm and one PVC conduitwill be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix inverter type LED INTEGRATED BATTEN tube light fitting , 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twistedFRLSH PVC flexible copper conductor cable with suitable size complete all as specified and as directed . Note :Make: Philips cat part no :BN 021C LED20S PSU CDL or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core flexible FRLSH PVC copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Philips cat part no : BN 021 LED10S- 6500/4000 PSU GR S1 or equivalent price and specification of M/S Wipro/CG

Supply and Fix 1 feet LED 05 watts integrated type tube light fitting complete with all accesories internally pre-wired and including connecting up with twin core flexible FRLS PVC copper conductor cable of suitable size complete all as specified and as directed. Note : Make :Philips/WIPRO/CG

Supply and fix wall light lamp alongwith all accessories connecting up with with twin core flexible FRLSH PVC copper conductor cable of suitable size and from point to lamp 20 watt LED Oval shape Wall mounted ligh complete all as specified and as directed . Note : Make :Philips cat part no : 31425 9-watts E27 LED or equivalent price and specification in WIPRO

Supply and fix in repair LED Picture light 7 watts indoor type corded-electric indoor type metal synthetic model type of size 355 x 180 x 95 mm 3 k ,wall mounted energy efficient of Model in Philips 31402 LED picture lightj including connection with twin core flexible FRLS PVC copper conductor cable of suitable size and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed . Note : Make :Philips cat part no :919215850797 or equivalent price and specification in WIPRO

Supply and fix in repair LED spot light round type 5 watts grey/metal syntheticincluding connection with twin core flexible FRLSH PVC copper conductor cable of suitable size and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed . Note : Make :Philips cat part no : 91500432900 or equivalent price and specification in WIPRO

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.Note : Make : Philips cat part no : RC370B LED30S-6500 or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repair LED luminaire 12/15 W , 220 V AC unique silmest recess cum surface panel tpe with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up driver with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Note : Make :Philips cat part no : ‎919215850415or equivalent price and specification in WIPRO

Supply and ffix in repair LED luminaire 9 W decorative ,wall mounting fixture in durable plastic and designer mesh in gold finish , 220 V AC unique silmmest recess cum surface panel type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed. Note : Make :Philips/WIPRO/DG

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protectioncomplete all as specified and as directed. Note : Make :Philips BRP020 LED HP/CW 240V 25Wequivalent price and specification of M/S Wipro/CG

Supply and fix in repairs round shaped 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with FRLSH PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed . Note : Philips cat part no Sleek Surface SM251CW: or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. complete with all accessories internally pre wired including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting withPVC FRLSH twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Note : Make: Philips cat part no :EnduraLED Bulkhead WT202W LED10S CW PSU S3 PC or Equivalent price and specification in M/S Wipro/CG

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) and taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : (i) Make:-Crompton/Orient (ii) Old ceiling fan will be deposited in MES store yard

Supply and fix Exhaust fan made out of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed . Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Supply and fix Exhaust fan made out of steel body complete with louvers shutter, voltage 230V, 50 Hz, heavy duty, Copper winding of sweep 300 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Supply and fix Wall mounting fans 230 V single phase 400 mm sweep , heavy duty with all accessories fixed to wall with all necessary brackets ,bolts nuts etc including testing and making good disturbed surfaces complete all as specified and as directed . Note :Make:- Almonard/Bajaj/Khaitan

Taking down old unserrviceable MCB DB alongwith MCBs with old wooden boards and making good to disturbed surfaces to match with the existing surface and taken as credit complete all as specified and as directed

Supply and fix Factory made epoxy powder coated distribution board double door TPN 8 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.60 mm thick CRCA sheet and fixed flush on wall on sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed. complete all as specified and as directed. Note : Make: Legrand/L&T/Indo Asian

Supply and fix MCCB , 4 pole , 125 A 16 KA 50HZ AC supply current rating conforming to IEC-609472 & IS-139473 including dismantling old one and taken as credit complete all as specified and as directed.. Note :Make: Siemen /Legrand/Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Note :Make : Legrand/L&T/Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.60 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings complete all as specified and as directed . Note :Make : Legrand/L&T/Indo Asian

Supply and fix Miniature circuit breaker (MCB) of SPN 40 to 63 AMP 240V, 10KA 'C' curve following poles including dismantling old one and taken as credit complete all as specified and as directed. Note : Make: Legrand/ Indo Asian /ABB

Supply and fxi MCB SP 240 Volt capacity 5 to 32 Amps‘C’ curve, complete all as specified and as directed. Note :Make: Legrand/ Indo Asian /ABB

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Supply and fix Electric water heater, storage type ABS complete with shock proof body and mild steel with glass lined coating inner tank and Glass lined coated incoloy heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connector piece etc fixed to wall with suitable bolts and nuts duly grouted including re-connecting the electrical and water supply connection and testing complete all as specified and as directed .Note :Make : Bajaj (Calenta M )/Havells(Monza EC )/Racold.

Supply and fix PVC connection, ISI marked, 15mm dia 600mm long with brass nuts suitable for hot/ cold water supply complete all as specified and as directed.

Material and labour for Fancy type Stop valve of 15 mm dia, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed down, screwed both ends for iron pipe complete all as specified and as directed.Note :Make : SEICO/GEM /ESS ESS

Supplyind and laying CPVC pipes 16 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fitting , fixed on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral (ISI MARKED)

Supplyind and laying CPVC pipes 20 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings ,fixed on walls/ceiling or laying in floors complete all as specified and as directed . Note : Make : Ashirwad/Astral (ISI MARKED)

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings ,fixed on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral (ISI MARKED)

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having Triple layered wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete and demolition/taking down of existing RCC/PVC water storage tank of any description from the existing staging/ Building after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed. Note :Make of HDPE Tank :Sintex/Polycon /Infra (ISI MARKED)

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Note :Make : Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed. Note : Make : Leader/Kirloskar/Zoloto/Kartar

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2.0 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Note :Make : Gloster/Poly cab/CCI

Supply and fix Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete all as specifed and as directed . Note : Make :Philips cat part no : or equivalent price and specification in WIPRO:

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc and getting out in any type of Soil complete all as specified and as directed.

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Note :Make : Ketron/Rex/Duraline

Returning, filling in excavated soil including spreading levelling and well ramming in layers n exc 25cm thick .complete all as specified and as directed.

Removing excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point .complete all as specified and as directed.

Supply and lay 25 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya (ISI MARKED)

ASHOK M RAJGOLKAR

M/s B C CHOUGULE

M/s. KIRAN M CHOUGULE

VAISHNAVI CONSTRUCTION