Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹31.8 Laccepted-aoc | ₹31.8 L | accepted-aoc |
Tender Value
₹38.0 L
EMD Value
₹63,600
Closing Date
25 May 2026, 11:00 pmClosed
Directorate of Municipal Administration
TA ELE AND WS
Firefighting continued work at Avaragoolla Solid Waste Disposal Unit under Davanagere city corporation
DMA/2025-26/EL/WORK_INDENT55872/CALL-2
DMA/2025-26/EL/WORK_INDENT55872/CALL-2
Open
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Davanagere
4 documents required · 4 mandatory
₹950
₹63,600
25 May 2026
16 May 2026
22 May 2026
FIREEXTENDEDWORK
Earth work in surface excavation by mechanical means for lowering and leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock and depth not exceeding 300mm as pe...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Mild Steel (Flats, Bars, Rods, Channels) sl no 72 page no A40 of VoL1 of csr 2023-24
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Appendix 1-Additionalities for Formwork, centering and Scaffolding For RCC Roof Slabs (50percent) (P.No.112 Sl.No.15 ) Volume I
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...
Polyurethane based water proofing for Retaining wall : Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, mois ...
Retaining wall/ UG tank wall (outside) waterproofing with sbs Membrane : Providing and laying water proofing treatment to the Retaining wall, water retaining structures outside with fully bonded 1.6mm...
Rectangular cover 600X850 mm with frame (low duty) ( item 709 page A 33 Vol 2 of CSR 2023-24)
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Supplying of recess mounting non integral type ........ LED LED w luminaire comprising of pressuredecast/extruded aluminium housing, with spring loaded falseceiling clamps, Power LED swith CC T6500 d...
Supplying of recess mounting non integral type ........ LED LED w luminaire comprising of pressuredecast/extruded aluminium housing, with spring loaded falseceiling clamps, Power LED swith CC T6500 d...
Supplying and drawing Flexible Multi core Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for wo...
Supplying,installing,testingandcommissioningapprovedmake.....C.I.GatevalvesasperIS:780/14846withflanges,bolts,nuts,washers,gasketsetc.complete---- c.,completeasperspecificaitonwithallleadandlift,load...
Supplyinginstalling,testingandcommissioningofPN16CI"NonReturnValve"confirmingtoIS13039withnecessaryboltsandnutsetccompleteincludescostofallmaterialslabourchargeswithallleadliftloadingandunloadingtrans...
Supplying, installing , testing and commissioning approved make ......... C.I. Gate valves as per IS: 780 / 14846 with flanges, bolts, nuts, washers, gaskets etc. complete ---- etc., complete as per s...
Supplying, installing , testing and commissioning approved make ......... C.I. Gate valves as per IS: 780 / 14846 with flanges, bolts, nuts, washers, gaskets etc. complete ---- etc., complete as per s...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with speci...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with speci...
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood...
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . Th...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm GI Plate. (Electrical SR 2023-24, Page No.55, Item No .12.58.6)
2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300 x 50 mm. (Electrical SR 2023-24, Page No.55, Item No .12.59....
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall , including necessary rawl plugs, Machine/...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch. (Electrical SR 2023-24, Page No.9, Item No.3.6.1)
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket. (Electrical SR 2023-24, Page No.9, Item No.3.6.3)
Supplyingof.....feet PVC Batten with integrated LEDtube....W with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI greater than 80. Power Input: 220 -240...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC ins...
Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured cable Item no 15.105 page no 33 vol6 CSR 2023-24
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as p...
Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180 degree swing and conforms to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of...
Supplying, installing, testing and commissioning approved make heavy duty (Class 'C') GI pipes and fittings confirming to IS 1239 PI and II, Malleable Specials such as tees, long radius bends, check n...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
FIRE FIGHTING CONTINUED WORK INDENT 55872.doc
Tender Document • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .