FURNITURE FOR ADDL/ALTN TO OMQs AND SMQs AT 54 ASP, AF, UNDER GE(P) AF GURGAON

Amount

Sch 'A' Part-I (Wooden Furniture) Supply of receptacle (PVC) all as per Drg No-FD/E6/MAP/13 complete all as specified and directed. Notes:- (i) Receptacle shall be of covered plastic container of 20 ltr capacity made with thick polymer plastic alongwith lid and handles. Receptacle shall of bright colours i.e. red/green/ blue etc as approved by GE. (ii) Rest all as shown on drawing. Make : Neel Kamal/Supreme/Cello/Brite/Blow plast

Supply of table bed side all as per Drg No- FD/E6/MAP/15 (R) complete all as specified and directed. Notes:- (i) The overall size shall be of 450x450x600mm (ii) The main frame work for the body is made out of 18x18 mm CRCA box seciton of 18G thick. (iii) 18mm thick prelaminated particle board exterior grade IS-12823 for top. Sides and front of drawers beading shall be of 4 mm thick fixed with head less nail. (iv) 12 mm plywood of as per IS -303 of approved make for side and back of the drawer and back side of the table shall be used. (v) Hard rubber /PVC shoe shall be provided to the bottom of each leg. (vi) CP steel handles shall be used for drawers. g) All expose wooden surface shall be french polish glossy finish. (vii) Rest all as shown on drawing.

Supply of table computer all as per Drg No-FD-E6 / MAP /03 complete all as specified and directed. Notes:- (i) Pipe of size 25 x 50 mm rectangular pipe 1.6 mm thick for base with adjuster 25 mm square 1.6 mm thick for vertical and horizontal shall be used. (ii) Board shall be 18mm pre laminated particle board exterior grade . Key board run on telescopic channel .All steel frame shall be powder coated . (iii) Rest all as shown on drg.

'Supply of computer chair all as per Drg No-FD/E6/MAP/01 (R) complete all as specified and directed. Notes:- (i) Tubular frame shall be cantilever type and made of 25mm dia and powder coated 12mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam with PVC dipping all around . (ii) Rest all as shown on drg.

'Supply of table writing all as per Drg No-FD-275 complete all as specified and directed. Notes:- (i) All wood work shall be of first class hard wood (teak) (ii) 18/19 mm prelaminated particle board exterior grade as per IS-12823 of approved make with 4 mm teak wood beading on expose edge of the board fixed with head less nails shall be used for top and box of table writing. (iii) Back of the box and bottom of drawer 6 mm commercial plywood and sides and back of the drawer and shelf 12mm commercial plywood as per IS-303 (iv) Shutter shall be fixed with chromium plated continuous (piano) hinges. A brass lock shall be provided in the shutter of cabinet with duplicate keys. (v) Hard rubber/ PVC rings shall be provided to the bottom of each leg. (vi) 4mm thick teak wood edging all-round shall be provided as shown on drawing.

'Supply of chair writing all as per Drg No-FD 280 complete all as specified and directed. Notes:- (i) All wooden members shall be made of 1st class seasoned teak wood. Canning shall be done with 2mm wiand weaving as per Godrej pattern. Hard rubber shoe shall be provided at the bottom of legs fitted with MS screw of appropriate size. (ii) All wooden members exposed to direct vision shall be french polished. (iii) Rest all as shown in drg.

Sch 'A' Part-II (Steel Furniture) Supply of bin linen multi purpose all as per Drg No-FD/E6/MAP/09 complete all as specified and directed. Notes:- (i) Bin linen multipurpose with ironing board shall be manufactured all as per details shown in the drawing. All dimensions, shape and size shall be followed as per drawing. (ii) All wood work shall be of 1st class hard wood (teak). (iii) Leg 45x45mm and stiffener 40x20mm as per details shown in the drawing. (iv) Back shall be of 12 mm commercial plywood as per 12-303. (v) 18 mm thick prelaminated particle board exterior grade for top, sides, shutter, drawer and shelf (one side teak finish and other side balancing white lamination) and bottom of drawer 12 mm prelaminated particle board with 1 mm PVC edging shall be providing all-round the expose edge of the board. (vi) Shutter shall be fixed with chromium plated contineous ( Piano) hinges. Steel chromium plated knobs shall be provided to each shutter. (vii) All exposed surfaces of timber and plywood shall be French polished (viii) 4 mm thick teak wood edging all round exposed edges surfaces shall be provided as shown on drawing. (ix) Rest all as shown on drawing.

Supply of ladder aluminium all as per Drg No-FD-1025 complete all as specified and directed. Notes:- (i) The overall length & width shall be of 2310X363.5mm (ii) The stringer shall be made of Aluminium , size 31.75 mm x 60mm x3.18 mm thick channel bent to shape as shown in drg. (iii) There shall be 08 rungs each 23mm dia & 2.43 mm thick, equally spaced, leaving 100mm on either side. (iv) The aluminium shall be anodized upto 15 microns. (v) Hard rubber shoes, made out of 32x60x80 mm shall be provided on either ends of stringer. (vi) Rest all as shown in drawing.

Supply of rack shoe steel all as per Drg No-FD-E6/MAP/02 (R) complete all as specified and directed. Notes:- (i) Overall size shall be 700mm long, 300mm wide and 880mm high. (ii) The legs of the shoe rack shall be 25mm dia MS pipe of 18 gauge. (iii) The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs. The shelves shall have 3 mm dia MS rod 9 Nos in width wise and 3 nos in length wise welded to 20mm dia shelf frame pre-treated with epoxy powder coated oven baked with black colour.

Supply of chair verandah all as per Drg No-FD/E6/MAP/11 complete all as specified and directed. Notes:- (i) 19mm dia 1.6mm thick conduit pipe shall be used for the frame as shown in drawing. (ii) PVC seat & back 4mm thick wt not less than 1.85Kg of seat & back and grooves 10 No on seat & back of size 90x10mm shall be used make AMKO/SUPREME/CELLO. (iii) All joints/fixing shall be done in accordance with standard workmanship and specifications. (iv) Best quality PVC inner shoe shall be used. All steel members shall be powder coated. Rest all as shown on drawing.

Supply of almirah steel medium all as per Drg No-FD-1032 complete all as specified and directed. Notes:- Overall size shall be 1270mm high, 765 mm wide and 440mm deep. The base shall be made of two number mild steel channel base welded to bottom almirah and shall be 100mm high mild steel sheet shall 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width. Top, sides, back, bottom and front of almirah shall be of 1 mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet. Front shutters shall have two leaves. A steel chromium plated handle 100mm long shall be provided to the shutter. A three way locking device shall be provided to front shutters. PVC sheet of size equal to size of leg base shall also be fixed under the legs of almirah irrespective of what is shown on drg. All joints and welding fixing shall be done according to standard workmanship. All steel surfaces exposed to view when placed in position shall be painted with two coats of granular silver grey enamel paint over a coat of primer with spray machine after preparation of surfaces rest all as per drgs.

O.K. ENTERPRISES