CT-1402(MMC-II)/CPD-I/BTPS/19

Russian make Fire Pump (as per sample) (Enter Zero Vlaue for this row)

Complete rotating assy. of fire Pump dynamically balanced with 3000 rpm consist of shaft-1 No., Sleeve-02 Nos., Impeller -01 No., Diffuser-02 Nos., Water defelector-02 Nos., Gland Bush-02 Nos., Lantern Ring-02 Nos. (Shaft-SS, Sleeve, L-ring- aluminum

Bearing Housing (Mat-Grey CI)

Coupling set with Coupling bolt with nut & bush (Mat-EN-24)

Coupling bolt with nut & bush (Mat-EN-24)

Impeller (Mat- Grey CI)

Indian Make Spares of Fire Pump (as per sample) (Enter Zero Vlaue for this row)

Lagging ring (Mat-SS)

Neck ring (Mat-SS)

‘O ’ring rubber (Neoprene rubber)

Oil seal rubber (Neoprene rubber)

Gland Bush (Mat-CI)

Spares of raw water pump (DSM 4M) (as per sample) (Enter Zero Vlaue for this row)

Pump Shaft (Mat-SS)

Casing wear ring (Mat-SS)

Cartridge for bearing (Mat-SS)

Impeller (1 set= 2 Nos.) Mat-Grey CI)

Eye bolt for gland bush (Mat-EN-24)

Shaft Sleeve DE/NDE(Mat-SS)

Coupling bolt with nut & rubber bush.

Spares of raw water pump (DSM5B) (as per sample) (Enter Zero Vlaue for this row)

Pump shaft with key & nut (Mat-SS)

Impeller (1 set= 2 Nos.) Mat-Grey C.I.

Casing wear ring (DE/NDE)Mat-Brass

Cartridge for bearing (DE/NDE)Mat-Brass

Inter stage diaphragm (Mat-SS)

Gland bush (Mat-SS)

Lantern ring (Mat-grey C.I.)

Shaft Sleeve (DE/NDE) Mat-SS)

Shaft Sleeve (DE/NDE) (Mat- SS), (DE-2 Nos., and NDE-02 Nos.)

Inter tae diaphragm

Lantern ring (Mat-Grey CI)

Spares for filter water pump(4UP-2x30)(as per sample) (Enter Zero Vlaue for this row)

Pump shaft (Mat-SS)

Casing wear ring (DE/NDE)Mat-SS)

Cartridge for bearing (DE/NDE)Mat-Brass

Bearing cover (DE/NDE)(Mat-SS)

Shaft Sleeve (DE)(Mat-SS)

Shaft Sleeve (NDE)(Mat-SS)

Gland Bush (Mat-Brass)

Lantern ring (Mat-SS)

Coupling pacer (Mat-SS)

Shaft sleeve nut (DE/NDE)(Mat-SS)

Emulsifier system:- (as per sample) (Enter Zero Vlaue for this row)

½” check valve on compressed air line, pressure-6 Kg/c (G.I.)

Neoprene rubber gasket for air kit of front cover of deluge valve of size:- 6” valve

Neoprene rubber gasket for air kit of front cover of deluge valve of size:- 4“ valve

Sprinkler 114 degree projector(Brass)

Sprinkler 90 degree Projector

Nipple-L=100mm (G.I.) of following size:- (Enter Zero Vlaue for this row)

Socket (G.I.) of following size:- (Enter Zero Vlaue for this row)

Tee (G.I.) of size following Size:- (Enter Zero Vlaue for this row)

Allen screw of size 6mx16mm (S.S.)

C.S. head screw of line 6mx20mm (Brass)

6NKS-10 Sump Pump (as per sample) (Enter Zero Vlaue for this row)

Head shaft with key and chuck Nut (S.S.)

Impeller shaft (S.S.)

Impeller (C.I.)

Impeller Nut, M-30(G.M.)

Impeller shaft sleeve for shaft (DE)(Brass)

Coupling bolt with nut & Teflon bush (S.S.)

Housing Bush (Brass)

Diesel Engine Fire Pump Shaft with key & locknut

2NKS-10 Sump Pump (as per sample) (Enter Zero Vlaue for this row)

Head Shaft (S.S.)

Inter mediate shaft (S.S.)

Impeller (C.I.)

Impeller Shaft sleeve for shaft (Brass)

Intermediate housing bush (Brass)

Coupling bolt with nut & bush (S.S.)

Temporary Sump Pump:- (as per sample) (Enter Zero Vlaue for this row)

Rubber gasket of size F 225mm, T=6mm

Rubber gasket of size F 165mm, T=4mm

Impeller (C.I.)

Coupling bolt with nut & bush(C.S.)

Pump Shaft (S.S.)

Brass spindle with bush for fire water line valves  150 mm (Brass)

KUMAON MOULDERS AND ENGINEERING WORKS

M/s Anupam Engineering Works