CA NO GE/C-33/2021-22 MISC REPAIR INCLUDING LEAKAGE/SEEPAGE TO CERTAIN BLDGS UNDER AREA OF GE (CENTRAL) DELHI CANTT-10

Amount

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smooth surface on ceiling, chajja in double storey building etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete in CM (1:6) finished even and smooth without using extra cement, complete all as specified and directed by Enginer in Charge.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey ,including scaffolding complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paintof DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connections of 15/20 mm dia of bore complete all as specified and directed by Engineer-in-Charge.

Removing of existing water proofing treatment of APP and removing of debris outside complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick on top of roof concrete in CM (1:4) finished even and smooth without using extra cement, complete all as specified and directed by Enginer in Charge.

M&L for Apply bituminious primer @ 0.3ltr/sqm (conforming to IS-3384) INCLUDING prepration of plastered roof surfaces surfaces. complete all as specified and directed by Enginer in Charge.

M&L for applying a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20Kg/Sqm on primed surfaces complete all as specified and directed by Enginer in Charge.

M& L for laying APP (Atatic Plypropylene ) modified five layered membrane 3 mm thick and weighing not less than.3.50Kg/Sqm with centre core 160 GSM/Sqm : core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrance shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specificiation complete all as specified and directed by Enginer in Charge.

M&L for applying two coat of siver Shield BITUMINIOUS paint on app Membrane complete all as specified and directed by Enginer in Charge.

S& F Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc .Including dismantling of existing water tank complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 500 and n.exc 1000 ltr complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing admixture of approved quality. (make: Pideilite or equivalent) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified and directed by Engineer-in-Charge.

All as per item No. 16 above but bore of pipe in 110 mm complete all as specified and directed by Engineer-in-Charge.

S&F inrepair PVC (SWR) bends any radius bore 75 mm complete all as specified and directed by Engineer-in-Charge.

All as per item No. 18 above but bore of pipe in 110 mm complete all as specified and directed by Engineer-in-Charge..

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof kerbs ,Coping rounded or chamfered on edges leavelling at top of roof complete all as specified and directed by Engineer-in-Charge.

M&L Brick (old size) work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 21 here-in-before but expect brick

Demolition of brick work or stone masonry built in cement mortar in any position including segregating serviceable/unserviceable bricks/stones complete all as specified and directed by Engineer-in-Charge.

Note :- Total amount of Sch of credit is Rs.27230.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

M/S ANIL KUMAR

M/S Sunil Steel Works