Bhadrachalam Road -Proposed service building of size 25x8m (G+1) duly dismantling the existing service building.

Item Breakup - A-DSR 2023 General Items

88 mm, weighing not less than 190 gms. 17.81 Providing and fixing floor mounted, white Each 2 18212.9 36425.8 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china 103 cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 104 18.7.3 25 mm nominal dia Pipes Metre 2 401.55 803.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with 18.8 one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 105 18.8.1 15 mm nominal dia Pipes Metre 20 497.8 9956 106 18.8.2 20 mm nominal dia Pipes Metre 50 537.6 26880 107 18.8.3 25 mm nominal dia Pipes Metre 50 627.25 31362.5 SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 108 18.13.1 25 to 40 mm nominal bore Each 2 911.9 1823.8 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 109 18.17.1 25 mm nominal bore Each 2 622.4 1244.8 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 110 18.22.2 150 mm diameter Each 4 222.35 889.4 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 4000 11 44000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 111 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 112 18.49.1 15 mm nominal bore Each 20 506.8 10136 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS 18.51 standards and weighing not less than 690 gms. 113 18.51.1 15 mm nominal bore Each 20 798.95 15979 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 114 18.52.1 15 mm nominal bore Each 20 670.45 13409 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 115 18.53.1 15mm nominal bore Each 16 574.3 9188.8 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing Each 6 125.6 753.6 116 not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 6 118.5 711 117 not less than 88 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 118 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 12 51.85 622.2 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.1 15 mm nominal bore, 105 mm long, weighing Each 16 182.1 2913.6 119 not less than 138 gms 18.62.3 25 mm nominal bore, 152mm long, weighing Each 26 523.8 13618.8 120 not less than 440 gms 18.64 Providing and fixing PTMT swivelling shower, Each 6 121.4 728.4

40 gms SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY 18.65 Providing and fixing PTMT soap Dish Holder Each 6 111.45 668.7 having length of 138mm, breadth 102mm, 122 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 123 19.1.2 150 mm diameter Metre 50 695.8 34790 21.0 ALUMINIUM WORK 21.1S General Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 23 1176.8 27066.4 124 (weight not less than 10kg/sqm) 21.3.2 With float glass panes of 5 mm thickness Sqm 5 1505.25 7526.25 125 (weight not less than 12.50 kg/sqm) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of 21.8 approved quality as per architectural drawings and direction of Engineer-in-charge complete. 126 21.8.1 Upto 5mm depth and 5 mm width Metre 160 96.75 15480 23.0 RAIN WATER HARVESTING & TUBEWELLS 23.1S General 23.5 Supplying, filling, spreading & leveling stone cum 4 1509.8 6039.2 boulders of size range 5 cm to 20 cm, in 127 recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 23.6 Supplying, filling, spreading & leveling gravels cum 4 1538.25 6153 of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in 128 required thickness, for all leads & lifts, all complete as per direction of Engineer-in- charge. 23.7 Supplying, filling, spreading & leveling coarse cum 2 1538.25 3076.5 sand of size range 1.5 mm to 2 mm in 129 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 26.86 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 130 26.86.6 Frame size 65 x 125 mm Metre 30 1381.6 41448 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N 26.87 (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 131 26.87.1 30 mm thick Sqm 9 4346.7 39120.3 Total 14328865.37

Item Breakup - B-DSR 2023 -Cement Concrete Items

Item Breakup - C-DSR 2023 -Reinforcement steel Items

Item Breakup - D-DSR 2023 -Structural steel Items

Item Breakup - E-DSR 2020 - Horticulture & Landscaping Items

Item Breakup - F-NS ITEMS

Preparation drawings and Bar-Bending Schedule with all details for buildings/structures etc, based on soil testing report, in Auto CAD for Approved GAD provided by Railways as required to suitable scale on film paper including check prints in colour with all contractors stationery, materials, labour consumables etc., complete as per specifications and as directed by Enginee-in-charge. Total 114187.75

C-DSR 2023 -Reinforcement steel Items 3310385.65 Below/P

E-DSR 2020 - Horticulture & Landscaping Items 29578.65 Below/P