Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-Finance | ₹10.3 L | L1 | Accepted-Finance Being the lowest rate quoted by the bidder. |
| 2 | L2₹11.2 L+₹90,161 (8.78%)Rejected-Finance SECTOR 56 H NO 21 SECTOR 56 FARIDABAD 121004 | NA | NA | 121004 | ₹11.2 L+₹90,161 (8.78%) | L2 | Rejected-Finance Higher rate quoted |
| 3 | L3₹12.1 L+₹1.8 L (17.6%)Rejected-Finance 1804 SECTOR 2 HUDA 124001 | ROHTAK | HARYANA | 124001 | ₹12.1 L+₹1.8 L (17.6%) | L3 | Rejected-Finance Higher rate quoted |
| 4 | Rejected-Technical | - | - | Rejected-Technical Non responsive Bidder |
| Sl No | Description | Qty | Unit | NARENDER SINGH CONTRACTOR L3 | Subhash Chander L2 | M/S Shambhu Da Construction L1 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver and alumn. heat sink ), on existing fixture. system
lumen efficacy = 100 lm/Watt output, internal surge protection of 2.5 KV ,THD ( 20% p.f.=0.95,CRI )80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends ,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) ,
maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/
Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 and LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical
parameters of products/ work , refer Annexure `A` attached with this BSR . | 15 | Each | 4,000 ₹60,000 | 350 ₹5,250 Lowest | 350 ₹5,250 Lowest |
| 2.00 | Providing and Fixing of IP-20 LED Recessed / Surface Mounted,Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver,with Short and Open circuit protection, having efficiency ) 85% .System Lumen efficacy of = 110 lm / watt, THD ( 10 % , Pf.=0.95,CRI )80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture
shall be of BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 and LM80) certificate / Report from
OEM shall be submitted. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work ,refer Annexure `A` attached with this BSR .Minimum lumen output 1300 lm | 8 | Each | 450 ₹3,600 Lowest | 2,500 ₹20,000 | 1,150 ₹9,200 |
| 3.00 | Providing and Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED and should be SMD type of 3 to 5 watt each . The System efficacy )=125 lm/ wt and potted driver and has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @)=300 V AC and Auto resetting Safety , Power Factor )0.95 driver Efficiency )85% ,THD(I) (10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current (750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI )70 and CCT 5700K plus 355K. Surge protection shall be min = 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure `A` attached with this BSR .LED Street Light fixture with Minimum lumen output 8700 lm (70 watt) | 5 | Each | 3,500 ₹17,500 | 3,500 ₹17,500 | 2,900 ₹14,500 Lowest |
Tender Value
Refer Docs
EMD Value
₹23,500
Closing Date
20 Mar 2026, 5:00 pmClosed
Arbind Kumar
Office of XEN/FTPS ,New office complex#253 ,HPGCL Colony,sector-23, Faridabad
Repair of Boundry wall,Parapet wall, replastering ,painting ,Flooring and lighting work at dispensary in Thermal colony , sector -23 ,Faridabd .
2026_HBC_495739_1
2026BCB577F5 B7DD 496D 9DA6 0F1130FFA7FB713PGC
Open Tender
Civil Works
Works
120 days
Faridabad (MC)
As per Bid Document
2 documents required · 2 mandatory
₹1,180
₹23,500
Yes
21 Sept 2026
8 Jan 2026
24 Mar 2026
8 Jan 2026
20 Mar 2026
8 Jan 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver and alumn. heat sink ), on existing fixture. system
lumen efficacy = 100 lm/Watt output, internal surge protection of 2.5 KV ,THD ( 20% p.f.=0.95,CRI )80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends ,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) ,
maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/
Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 and LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical
parameters of products/ work , refer Annexure `A` attached with this BSR . | 15 | Each | - | - |
| 2 | Providing and Fixing of IP-20 LED Recessed / Surface Mounted,Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver,with Short and Open circuit protection, having efficiency ) 85% .System Lumen efficacy of = 110 lm / watt, THD ( 10 % , Pf.=0.95,CRI )80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture
shall be of BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 and LM80) certificate / Report from
OEM shall be submitted. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work ,refer Annexure `A` attached with this BSR .Minimum lumen output 1300 lm | 8 | Each | - | - |
| 3 | Providing and Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED and should be SMD type of 3 to 5 watt each . The System efficacy )=125 lm/ wt and potted driver and has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @)=300 V AC and Auto resetting Safety , Power Factor )0.95 driver Efficiency )85% ,THD(I) (10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current (750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI )70 and CCT 5700K plus 355K. Surge protection shall be min = 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure `A` attached with this BSR .LED Street Light fixture with Minimum lumen output 8700 lm (70 watt) | 5 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.97 MB
5X33EFZ143211.pdf
Additional Documents • 0.45 MB
BOQ_574230.xls
BOQ • 0.27 MB
corrigendumeot5.pdf
PDF • 0.03 MB
corrigendumeot4.pdf
PDF • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .