GE(P)AF/GUR-54/2020-21 REPAIR/MAINT OF SOLAR WATER HEATING SYSTEM, ELECTRIC GEYSERS, LED LIGHT FITTING AND OTHER ITEMS IN 13 BRD, 16 BRD, 27 ED AND 31 MCU AT AF STN PALAM UNDER GE (P) AF GURGAON

Amount

Attending complaints related to internal electrification discipline, physical checking of entire electrical system, like continum of earth continuity conductor by using relevent gadgets, checking of R-N,Y-N,B-N,E-N, R-B,R-Y,Y-B voltage, and taking remedial actions without the use of any major store except, screws, nuts, bots, black insulating tapes etc. to obtain completion/ resolve of complaints arising out of faulty supply and receipt of power at usable voltage rating, preventing any hazard by forecasting and checking for serviceability of Geysers, fans, luminaries etc. and eliminating any loose connections by taking appropiate action and eliminating any other hazard requiring tightening and hanging ceiling fans, geysers, wall mounted fans and luminaries etc. and obtaining completion from users. The job also includes replacement of minor repairs like reconnections, replacement of screw/washers, fastners any type & size, insulation tape replacement, taking down & refixing of all type of fans & Geyser after cleaning etc. with all fixing accessories complete all as specified & as directed by Engineer-in-charge by deploying at least 01 Electrician with 01 No helper for Day to day complaint rectification at AF station palam (13 BRD,16 BRD,27ED & 31 MCU all technical & domestic area) in day shift from 0830 Hrs to 1730 Hrs.

(i) Any material required to be replaced for complaint rectification other than specified shall be measured and paid seperately under respective items as M&L and labour component of that is not included in this item. (ii) The contractor shall provide all the stationery required at complaint cell at AGE E/M AF PALAM complete all as specified and as directed by Engineer-in-charge. (iii) Timely completion of complaint is the true essence of the contract, therefore the contractor shall ensure day to day completion of job entrusted and submit all relevent job cards by shift end for record and feedback. (iv). Any minor spares like screw,washer,insulation tape, nuts, bolts, fastners, gitti etc shall provided by the contractor at own cost. (v) All T&P required by electrician for complaint rectification shall be provided by the contractor at own cost. (vi) As contract is day to day maintenance type, site for execution of work shall be given on day to day complaint basis as per the requirement of user.

S&F in replacement of indoor decorative LED batten light fitting 1x18/20W tube light fitting with 4 feet long LED Tube of 18/20W complete with all accessories internally prewired complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of indoor decorative LED batten light fitting 1x9/10W tube light fitting with 2 feet long LED Tube of 9/10W complete with all accessories internally prewired complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of wall Red & Green lamp fitting with bulb holder & LED Bulb complete with all accessories as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of 2'X2' Surface /ceiling mounted light fitting 40/42W LED including white diffuser complete with all connected accessories complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of Mirror light fitting LED 09/10W LED tube 2 feet complete with all accessories complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of LED lamp of 2.5/4 W 240Volts 50Hz. complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of LED lamp of 9 /14 W 240Volts 50Hz. complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of Lamp/ batten Holder for wall/surface mounted light fitting complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of wall night lamp fitting with bulb hoder & LED Bulb of 07W complete with all accessories complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of Surface mounted round shaped light fitting with 07W LED bulb & Bulb holder including white diffuser complete with all connected accessories complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F in replacement of fluorescent tube light fitting flame proof FLP-WP of T51×28 W including integral reflector made of aluminium alloy LM6, with electronic ballest, bipin holders, connector blocks, etc and all accessories pre-wired and including connecting up with twincore twisted flxible copper condector with suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

Supply and fix in replacement of industrial wall mounted plug socket combined in polycarbonate enclosure suitable for IP44 degree of protection 16/20 Amps rating 2P+E, complete all as specified and directed by Engineer-in-Charge. Make- Neptune/schneider/Havells.

S&F LED driver 38/40 W 240 Volt 50Hz suitable for existing 2'×2' rectangular ceilling light complete all as specified and as directed by Engr-in charge. Make: Halonix/Syska/C&S/ or equivalent out of makes specified in list of makes.

S&F LED driver 15W 240 Volt 50Hz suitable for existing philips fancy rounded ceilling light Type: DN170C LED10S-6500 PSU WH complete all as specified and as directed by Engr-in charge. MAKE: Philips/Syska/C&S or equivalent out of makes specified in list of make.

S&F LED driver 21 W 240 Volt 50Hz suitable for existing Philips fancy rounded ceilling light Type: DN170C LED10S-6500 PSU WH complete all as specified and as directed by Engr-in charge. MAKE: Philips/Syska/C&S or equivalent out of makes specified in list of makes.

S&F in replacement of Heating element 1.5/2.0 KW double tube type with circular/ tringle shape including rubber washer suitable to fit existing geyser complete all as specified. Make: Theta

S&F in replacement of brass ends wiremesh type stainless steel flexible hotwater connection pipe upto 2.5 feet as per requirement complete all as specified and as directed by engineer-in-charge.

S&F in replacement of brass ends PVC flexible hotwater connection pipe upto 2.5 feet as per requirement complete all as specified and as directed by engineer-in-charge.

S&F in replacement of thermostate any type for geyser 25 to 50 Ltrs as per matching existing complete all as specified and directed by Engineer-in-Charge.

S&F only in replacement of indicating lamps as per the site requirement complete all as specified and as directed by Engineer-in-charge.

Supply & Fix in replacement of heat proof rubber pvc Gasket suitable for upto 50 Ltrs geyser as per site requirement and complete all as specified & directed by Engineer-in-charge.

Supply & Fix in replacement of heavy duty stainless steel element holding assembly 06/09 holes with provision of safety valve in its inlet pockets for thermostate, drain plug and all other accessories complete all as per site requirement matching to existing type and shape and all as specified & directed by Engineer-in-charge.

Supply & Fix for insulation of 25 to 50 Ltrs geyser as per existing insulating material in existing quantity for each geyser complete all as specified and as directed by Engineer-in charge.

Supply & Fix in replacement of stainless steel water storage tank for upto 50 Ltrs capacity geyser as per existing gauge and shape complete all as specified and as directed by Engineer-in charge.

Supply & Fix in replacement of top cover complete as per matching to existing type and size for upto 50 Ltrs capacity geyser complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of bottom cover complete as per matching to existing type and size for upto 50 Ltrs capacity geyser complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of outer body 18 gauge complete with bottom and top cover as per matching to existing type and size for upto 50 Ltrs capacity geyser complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of outer ring GI steel of 18 gauge upto 3 inches height for holding of tank in geyser of capacity 25 to 50 Ltrs capacity complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of apparture plate for geyser of capacity 25 to 50 Ltrs capacity as per matching to existing complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of sleeve for protection of wire of geysers complete all as specified and as directed by Engineer-in-charge.

Supply & Fix Geyser of capacity 25 Lrs vertical type 1500W smart gaurd,three level safety, rust proof metal body, high pressure resistance complete all as specified and directed by Engineer-in charge. Make:-Bajaj/Havells/Philips.

S&F only spike guard with 04 Nos socket outlets controlled by a switch, indicating lamp, fuse and child safety shutter complete with min 3 meter cable with plug top. Make:- Anchor (by Panasonic)/ Havells/ Bajaj/ Philips

S&F 3 Pin plug top 16 Amps complete all as specified and directed by Engineer-in-Charge. Make:-Anchor/Legrand/Havells-cabtree.

S&F ceiling Rose surface bakelite 3 terminal complete all as specified and directed by Engineer-in-Charge.

S&F PVC Casing capping 20/25mm ISI marked all as specified and as directed by Engineer-in-charge.

S&F modular white cover plate with frame 1/2/3 module as required at site complete all as specified and as directed.

Supply only Cable PVC insulated unsheathed single core 1100V HRFR grade stranded flexible copper conductor of size 1.5 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply only Cable PVC insulated unsheathed single core 1100V HRFR grade stranded flexible copper conductor of size 2.5 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply only Cable PVC insulated unsheathed single core 1100V HRFR grade stranded flexible copper conductor of size 4 sqmm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of RCCB double pole 40Amps capacity sensitivity 100mA as per matching to existing complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of RCCB four pole 40 Amps capacity sensitivity 300mA as per matching to existing complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of MCCB DB double door type SPN 12 way complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/ Havells/ L&T

Supply & Fix in replacement of Load line MCCB DB double door type TPN 12 way vertical type without MCCB complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/ Havells/ L&T

Supply and fixing in replacement GI pipe, medium grade, 20 mm bore including ISI marked fittings and fixing arrangements complete all as specified and as directed. Make - TATA/JINDAL/PRAKASH

Supply and fixing in replacement GI pipe, medium grade, 25 mm bore including ISI marked fittings and fixing arrangements complete all as specified and as directed. Make - TATA/JINDAL/PRAKASH

Supply and fixing in replacement GI pipe, medium grade, 15 mm bore including ISI marked fittings and fixing arrangements complete all as specified and as directed. Make - TATA/JINDAL/PRAKASH

Supply and fixing in replacement Forged Ball brass valves, high pressure, screwed for iron pipe of size 20 mm bore all as specified and directed.

All as per srl item No 48 here-in-before but for size 25 mm bore.

All as per srl item No 48 here-in-before but for size 15 mm bore.

Supply and fixing in replacement 25 mm Brass Float Valve complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement 20 mm Brass Float Valve complete all as specified and directed by Engr-in-Charge.

Material & labour for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) for making rectangular cube of size 30X30X45cm for installation of solar collectors and support of hot water tank/ hot water pipes etc including frame work and demolition of old PCC blocks complete all as specified and directed.

Material & labour for framed work, fabricated from structural steel sections including welding, bending, cold or hot, drilling holes for bolts, in any shape or size and as indicated or directed having MS angle of size 40X40X4mm thickness on top for placing the collector panels/ water tank/supporting hot water pipes /ladders for approch etc inclusive of two coats of synthetic enamel paint over a coat of red oxide primer and fixing in walls/roof etc complete all as specified and directed by Engr-in-Charge.Note: Cost of taking down/dismantling is deemed to be included in quoted rates by contractor.

Material & labour for cleaning of toughned glass first with detergent and after that with coline solution and fixing in pisition after cleaning and gas welding complete all as specified. Note : (a) Cleaning of all glasses should be done once in a month upto completion of work(maximum 09 months). (b) measurement shall be carried out one time only for total 09 months. (c) rates for the same shall be included in rate quoted by the contractor

Supply and fixing in replacement hose pipe clamps as per existing provn complete all as specified and directed by Engr-in-Charge.

Supply & Fixing of Nut, M6 (Stainless steel) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing of Bolt, M6 x 25, Hex Head (Stainless steel) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing washers, M6 x 25, Hex Head (Stainless steel) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing of Collector Screws (Stainless Steel.) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing of Gasket as per matching/ existing complete all as specified and directed by Engr-in-Charge.

M&L for disconnecting the chock heat collector panel from system & from each other and disconnecting itself taking out the collector take from it frame, cleaning of chock take collector buy roding cutting main tube and brazing the same after necessary disconnecting and cleaning. Taking back the cooper tube collector to its frame and reconnecting the panel after cleaning to each other including replacing all necessary flanges of brass, nuts bolts, packing, insulation etc complete all as specified and directed by Engr-in-charge.

S&F providing Glass wool insulation 100mm thick insulated covered by cladding of aluminium sheet 24 SWG on warm GI water line of any size complete all as specified & as directed by Engr-in-charge.

S&F replacement of unserviceable heating element cum thermostat including connecting with electrical connections, complete all as specified and as directed by Engineer-in-Charge.

M&L for descaling the heat collector panel (capacity 100 Ltr each) by descaling pump using commercial grade acid mixed with water in the ratio of 1:10 (acid : water) after opening / dismantling the heat collector panel from each other and re-fixing the same after complete cleaning including providing new nuts & bolts, gasket packing, worn out brass flange including brazing work , all other required hidden work for complete descaling complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement of old flat plate solar collectors toughned GLASS as per matching existing type , including all fixing accessories complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of old flat plate solar collectors frame BOX, including all fixing accessories complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of old flat plate solar collectors copper absorber, including all fixing accessories complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of flat plate solar collectors of size 1992x1090x100 mm Complete puff insulated collector accessories complete all as specified and directed by Engr-in-Charge.

Supply, Installation, testing and commissioning in replacement of insulated hot water storage tank of stainless steel SS 304 tank 100 ltr 3 mm thick capacity heat exchanger type duly 100mm thick glass wool insulated covered by cladding of aluminium sheet 24 SWG including connecting all GI connections to the new SS tank with collector panels and MS stand of suitable thickness including heat exchanger water pot mounted on the top including taking out old U/S one complete all as specified and as directed by Engr-in-charge. Make: ARIANA /Surya shakti India Pvt Ltd or equivalent ISI marked. Note :- (a)The rate for taking down is deemed to fit in the quoted rate, no extra payment made on this account. (b) Any damage to the building while installing hot water storage tank should repaired in quoted amount, no extra payment made on this account.

Supply, Installation, testing and commissioning in replacement of insulated hot water storage tank of stainless steel SS 304 tank 250 ltr 3 mm thick capacity heat exchanger type duly 100mm thick glass wool insulated covered by cladding of aluminium sheet 24 SWG including connecting all GI connections to the new SS tank with collector panels and MS stand of suitable thickness including heat exchanger water pot mounted on the top including taking out old U/S one complete all as specified and as directed by Engr-in-charge. Make: ARIANA /Surya shakti India Pvt Ltd or equivalent ISI marked. Note :- (a)The rate for taking down is deemed to fit in the quoted rate, no extra payment made on this account. (b) Any damage to the building while installing hot water storage tank should repaired in quoted amount, no extra payment made on this account.

Supply, Installation, testing and commissioning in replacement of insulated hot water storage tank of stainless steel SS 304 tank 500 ltr 3 mm thick capacity heat exchanger type duly 100mm thick glass wool insulated covered by cladding of aluminium sheet 24 SWG including connecting all GI connections to the new SS tank with collector panels and MS stand of suitable thickness including heat exchanger water pot mounted on the top including taking out old U/S one complete all as specified and as directed by Engr-in-charge. Make: ARINNA /Surya shakti India Pvt Ltd or equivalent ISI marked. Note :- (a)The rate for taking down is deemed to fit in the quoted rate, no extra payment made on this account. (b) Any damage to the building while installing hot water storage tank should repaired in quoted amount, no extra payment made on this account.

M&L for Annual maintance contract visit for LAB the following capacity EOT Crane, at 13 BRD Tech Area including servicing, overhauling & repair if any required with replacement of all unserviceable parts complete all as specified and as directed by Engineer-In-Charge. The AMC also includes the cost of initial health inspection and Preventive maintenance as required:-

2 TON EOT CRANE.

5 TON EOT CRANE No 1.

5 TON EOT CRANE No 2.

NOTES: TERMS & CONDITIONS OF AMC:- 1. Complained/Breakdown will be attended within 24 hours after information. 2. Preventive checking will be held once in a month as per client schedule.

SCOPE OF WORK: (a) Gear Boxes: (i) Checking of oil seal, gear teeth for wear and correct meshing. (ii) Oil top up if required. (b) Bearings: (i) Checking of bearings and all related fastening. (ii) Checking the abnormal sound of bearings. (c) Thruster Brakes: (i) Checking of brake liners for wear, adjustment of linkage to ensure brake shoes do not drag. (ii) Greasing of linkage pins, adjustment and cleaning of solenoid, checking and adjustment of E-M brakes. (iii) Adjustment of various clearances, torque and thruster stroke setting. (iv) Brake shoes clearance setting. (d) DCEM Brakes: (i) Magnet stroke setting if required. (ii) Inspection of brake shoes clearance and adjustment of same if required. (iii) Torque adjustment. (e) Wire Rope: (i) Checking for wear of rope and broken strands and minor rectification if required. (ii) Applying Servo-AP3 Grease to the wire rope. (f) Hook: (i) Checking for free rotation of hook and its lubrication. (g) Long travel (LT) & cross travel (CT) wheels

(i) Inspection for wear and cracks in flange. Checking LT & CT drive for smoothness i.e . no abnormal sound, bubbling / jerk. (ii) Checking for alignment and level of CT & LT railing. (h) Rope Sheaves: (i) Check for wear and cracks in flange. (i) Nut and bolts/ Fastener: (i) Checking and tightening of all fasteners as per requirement. ELECTRICAL : (j) Motors: (i) Checking of motor vibration, current on no-load and full load, heating. (k) Drive: (i) Checking of current and voltage level of each drives at no load and full load. (ii) Identification of malfunctioning of drive, if any. (l) Electrical Connections: (i) Thoroughly checking of electrical connections, terminals and wiring of all panels. (m) Limit Switches (LT&CT) (i) Checking and setting right of all limit switches. (n) Resistor Connections: (i) Checking for broken or damaged connections and replacement if required. (o) Current Collector: (i) Check for wear of collector shoes and rectification / replacement. (p) Control Panel: (i) Checking the healthiness & cleaning of cabinet, contractors, main switch, MCB’s & other minor works if required.

M&L for Load testing of cranes of 2 ton capacity by providing suitable loads for testing complete all as specified and as directed by Engineer-in-charge.

M&L for Load testing of cranes of 5 ton capacity by providing suitable loads for testing complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of 18A CONTACTOR, 110V COIL VOLTAGE for 2 TON crane all as specified and directed by Engr-in-Charge

Supply and fixing in replacement of THERMAL OVERLOAD 2.2-6A for 2 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LIMIT SWITCH LEVER TYPE for 2 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of SNAP ACTION LIMIT SWITCH FOR MH for 2 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement WIRE ROPE 9MM for 2 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of BCH ELECTROMAGNETIC BRAKES FOR CT AND LT for 5 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 40A CONTACTOR, 110V COIL VOLTAGE for 5 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 18A CONTACTOR, 110V COIL VOLTAGE for 5 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of THERMAL OVERLOAD 10-12A for 5 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LIMIT SWITCH LEVER TYPE for 5 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of SNAP ACTION LIMIT SWITCH FOR MH for 5 TON crane all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of WIRE ROPE 12MM for 5 TON crane all as specified and directed by Engr-in-Charge.

Taking down existing serviceable TON crane complete with connected mechanisum, transportation and installation of same in other location, electric connections and testing complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement of Bus Trunking having copper bus bar of cap 40 Amp 3L+N+PE, F 50HZ with insulator and tap off unit at each 0.5 mtr intervals all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Bus Trunking having copper bus bar of cap 60 Amp 3L+N+PE, F 50HZ with insulator and tap off unit at each 0.5 mtr intervals all as specified and directed by Engr-in-Charge.

Note:- (i) The amount of Rs 162830.00 against Schedule of Credit on Page Nos 113 to 114 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance (ii) All the complaint (except solar water heater, geyser leakage complaint) registered before 1000 Hrs of every day shall be rectified on same day upto 1700 Hrs. Any delay in complaint rectification a penalty shall be recovered @ Rs.100/ per complaint per day. Geyser leakage repair shall be done within 48 Hrs from date of complaint. After 48 Hrs panelty may be imposed on contractor as decided by Engineer-in-charge. (iii) Any desturbed surface during execution of work shall be made good as existing. Nothing extra shall be paid in this respect. The quoted rate are deemed to be included the same cost.

PARKASH ENTERPRISES

Bluemax Associate

Ridhi engineers and builders

JAIPAL AND BROTHERS

New Era Engineers