Loading
Loading…
Loading…
Tender Value
₹4.1 L
EMD Value
₹8,400
Closing Date
15 Jul 2026, 12:00 pm
EE, FAWS-I, EM, KMDA
OFFICE OF THE EXECUTIVE ENGINEER, DIVISION-FAWS-I, E-M SECTOR, KMDA, 19 G T Rd, HIT BUILDING (3RD FLOOR), HOWRAH -711101
Supply, delivery and installation of Two (02) no submersible Pump motor set at Nibra H/W and Kona Durgamandir P/H along with allied E-M works under FAWS-1 scheme.
2026_KMDA_1029637_1
EE(E/M)/FAWS-1/2W - 01/26 - 27/08 Date- 23.06.2026
Open Tender
Electrical Work/ Equipment
15 days
Nibra and Kona
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹8,400
7 Jul 2026
7 Jul 2026
17 Jul 2026
7 Jul 2026
15 Jul 2026
7 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Withdrawing the Sub P/M Set (upto 25 HP) alongwith column pipe from the well after disconnecting the all accessories for necessary testing/checking/repairing purpose. | - | Nos | 4,213.1 | - |
| 2 | Supply and delivery of clear water vertical wet type submersible pump suitable for borewell conforming to IS:8034 (and as amended therafter) with standard MOC for potable clear cold water and BEE 3 star rated capable of discharging noted M3/hr against head of water column. The pump shall be directly coupled with a continuous rated 2-pole suitable wet type vertical squirel cage induction motor conforming to IS : 9283 (and as amended therafter), suitable for operation in AC Three phase 415V, 50Hz (category B motor). For 20HP, 3 stage, 52 m head of WC & 70 M3/hr discharge. | - | Nos | 91,704 | - |
| 3 | Supply & Delivery of 125 mm dia / 150 mm dia (5"/6") standard duty PVC/CI Adoptor. | - | Nos | 4,171.75 | - |
| 4 | Supplying including cost of installation of C.I. Mechanical joint Tee as dimensionally described in IS:13382/2004. Each Tee consists of One C.I. Body, Two C.I. Follower Glands, Two sealing Rubber Gaskets of EPDM quality (Conforming to IS:5382/1985 Type-4) and Zinc coated M.S. Fasteners. The Branch Flange is drilled as per IS: 1538. The whole assembly is mechanically and hydraulically tested to provisions as laid down in IS:13382/2004.Diameter in mm 150 x 150 x 150. | - | Nos | 7,591 | - |
| 5 | Supply & delivery of Cast iron double flanged single door swing Non-Return Valve generally conforming to IS 14846 having body, door cover in graded cast iron to IS 210 Gr. FG 200, body and door rings and bearing block of leaded tin bronze to I.S 318 Gr. LTB 2, hinge pin of ST AISI410 valves suitable for maximum working pressure of 10/16 kg/cm2 and body tested 15/24 kg/cm2.Diameter in mm 150mm | - | Nos | 23,702 | - |
| 6 | Supply & delivery of fabricated MS Kiosk made from 16 SWG MS Angle (18'',16'',8'') incl. Providing Al busbar of 60 A rating for main Supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC. | - | No | 3,434.85 | - |
| 7 | Double end flange 150 mm dia 90 bend ISImarked-IS 1239, | - | No | 8,175 | - |
| 8 | Supply of pump-motor protective device cage type (galv. iron ) comprising of wire rope clamps etc as per direction of EIC. | - | Nos | 2,215.5 | - |
| 9 | Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L & T/ABB/Schneider/Simence/ GE) having contact block of the following range. i)70-100Amp | - | Each | 7,469 | - |
| 10 | Supplying and fixing 100/125 A Sheet steel Main Switches on angle iron frame on wall | - | Nos | 6,448 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
BOQ_2528661.xls
BOQ • 0.27 MB
Docs2_F1.pdf
Tender Documents • 0.73 MB
Download all tender documents and submit your bid