Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 CrAccepted-AOC 2K 23 HOUSING BOARD KRISHNA NAGAR BHARATPUR RAJASTHAN 321001 | BHARATPUR | BHARATPUR | RAJASTHAN | 321001 | ₹7.3 Cr | L1 | Accepted-AOC L1 |
| 2 | L1₹9.3 CrRejected-Finance | ₹9.3 Cr | L1 | Rejected-Finance REJECTED DUE TO HIGHER RATES. |
Tender Value
₹9.4 Cr
EMD Value
₹18.8 L
Closing Date
26 Feb 2021, 12:00 pmClosed
OFFICE OF SE UNNAO CIRCLE PWD UNNAO
OFFICE OF SE UNNAO CIRCLE PWD UNNAO
WIDENING AND STRENGTHENING OF AHIRORI BLOCK OFFICE ROAD. (ODR) IN KM 1 TO 5.800 KM FROM BILRAYA PANWARI ROAD (SH-21) KM 155 ROAD. SANCTIONED UNDER PT. DEEN DAYAL UPADHYAY SCHEME (UNDER RAJYA YOJNA) SAMANYA GRANT NO-58 LENGTH 5.800 IN DIST- HARDOI
2021_CEUCZ_548821_1
51/M/1MT/ETENDER/U.C/2020-21 DT. 04.01.2021
Open Tender
Civil Works
Item Rate
365 days
HARDOI
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,715
₹18.8 L
Yes
OFFICE OF SE UNNAO CIRCLE PWD UNNAO
29 Jun 2021
25 Jan 2021
27 Feb 2021
25 Jan 2021
26 Feb 2021
25 Jan 2021
27 Jan 2021
Amount
Earth work in excavation of foundation of stuctures as pet drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleteious matter, dressing of sides and bottom backfilling the excavation earth to the extent required and utilsing the remaining earth locally for road work.(Trench only)
Construction of /embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.
Construction of shoulder with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (in widening portion)
Providing, laying and spreading graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mix material by Tipper to site, Laying in uniform layers with paver in sab-base /course on well surface and compacting with vibratory roller to achieve desired indirect tensile strength to form a layer of Base as per specification. Wet mix macadum with 1.0% O.P.C. cement & 3.50% emulsion(SS-2)
Providing and applying tack coat with VG-10 using bitumen distributor at the rate of 0.30kg per sqm on the prepared surface cleaned witout hydraulic broom .
Providing and laying bituminious concrete using crushed aggregates of specified grading, premixed with bituminous binder as per job mix, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects.
Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
Plain cement concrement 1:3:6 nominal mix in foundation with crushed aggregate 40 mm nominal size mechanically mixed,placed in foundation and compected by vibration including curing for 14 days. FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
Brick masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and technical speficiations . FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
RCC Grade M 20 - Furnishing and placing reintforced cement concrement in super structure as per drawing and Technical Specifications. FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
RCC Grade M 25 - Furnishing and placing reintforced cement concrement in super structure as per drawing and Technical Specifications. FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and Technical Specifications clauses. FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
Pointing with cement mortar (1:3) on brickwork in sub structure & super structure as per drawing and technical specification. FOR RETAINING WALL,RCC CULVERT, RCC DRAIN AND H.P. CULVERT
Back Filling of OBB FOR RCC CULVERT
Laying 1000 mm dia NP-3 RCC pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation protection works, back filling conrete and masonary works in head walls and parapets. complete & Technical Specifications as per Section 2900 of MoRT&H Specifications .
Providing and applying tack coat with bitumen using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (Rumble strip) (FOR ROAD SAFETY)
Providing and laying bituminious concrete using crushed aggregates of specified grading, premixed with bituminous binder as per job mix, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects. (Rumble strip) (FOR ROAD SAFETY)
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. (FOR ROAD SAFETY)
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.(FOR ROAD SAFETY)
CAUTION BOARD - Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 30 cm x 90 cm rectangular. (FOR ROAD SAFETY)
TRAFFIC SIGNS - SINGLE CHEVRON (NORMAL) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (50 cm x 60 cm rectangular) (FOR ROAD SAFETY)
TRAFFIC SIGNS - MAXIMUM SPEED LIMIT Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 60 cm circular (FOR ROAD SAFETY)
TRAFFIC SIGNS - HAZARD MARKER Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 30 cm x 90 cm rectangular. (FOR ROAD SAFETY)
TRAFFIC SIGNS - STOP Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) (90 cm equilaterial triangle. (FOR ROAD SAFETY)
Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete.Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. (FOR ROAD SAFETY)
Retro Reflective Signs Providing & fixing of reflective signs with a corrosion resistant 4 mm thich aluminium composite panel face to fully covered with High Intensity primatic sheeting type IV as per IRC-67:2010 retro reflective sheet with MS angle frame of 35X3. (FOR ROAD SAFETY)
Maintence For First Year
Maintence For Second Year
Maintence For Third Year
Maintence For Forth Year
Maintence For Fifth Year
M/s PBC Infrastructure India Private Limited
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .