Spl repair to fencing gates, garbage bins and drain in certain units and provn of iron window chajja in bldg No-2 at New KLP Loc under GE Gurdaspur.

Amount

M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface.

M&L for cement concrete in foundations, filling and mass concrete 1:3:6 type C-2, (using 40mm graded stone aggregate) complete all as specified and directed.

S&F mild steel angle iron work as in fencing post and struts including cutting tops to shape as directed drilling holes notching for wire conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wire any mesh size and type, to any type of strands rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only 3 or 4mm dia PVC coated galvanised mild steel chain link fencing of mesh size 75 x 75mm fixed with string bolts complete all as specified and directed.

S&F mild steel flat iron work conforming to Fe 290 Gde E-165 as in fencing including drilling holes, notching for screw complete all as specified and directed.

S&F for mild steel work as in fencing rod of 10mm dia. round bars including hooking/ welding in fencing mesh etc. conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild screw bolts diameter of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n. exc 15cm long complete all as specified and directed.

S&F in repair galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc. complete all as specified and directed.

Dismantling posts or struts (RCC) any section including taking out embedded portion and making good disturbed ground, embedded in natural ground, complete all as specified and directed.

All as per Srl item No 10 above but embedded in concrete, brick work etc.

Dismantling fencing wire mesh any type including FI, rods, bolts complete all as directed.

Excavating in trenches n. exc 1.5m wide and n. exc 1.5m depth for foundation and getting out in soft/loose soil complete all as specified and directed.

M&L cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Returning, filling in soils including spreading, levelling , watering and well ramming in layers not exc 25cm in soft/loose.

Removing excavated material soils to a distance n. exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point.

Dismantling of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan to any radius in half brick thick wall as in sides of drain and upper band of drain with bricks laid on edge, built in CM 1:4 complete all as specified and directed.

All as per Srl item No 19 above but except bricks.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channel and drain and similar items complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) in coping and similar works including weathering, slightly rounded or chamfered angles and throating including use & waste of necessary form work complete all as specified and directed.

M&L for flush pointing to brick walls in CM 1:3 including raking out joints complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends complete all as specified and directed.

Taking down cement plaster of any description on brick walls etc. including raking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface on walls in CM 1:4 with water proofing compound finishing even and fair complete all as specified and directed. Note :- Plaster with water proofing compound shall be carried out when ever directed by Engineer-in-Charge. WPC will be measured and paid separately.

M&L for prepration of newly plastered/ unplastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.

Dismantling wrought iron and mild steel work of any description complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including eighe hookds and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete Gde Fe-290 Gde E-165 complete all as specified and directed.

S&F welded steel wire fabric n. exc 4 kg per Sqm complete to wood or steel member complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces of any description over 10cm in width or girth not otherwise described over priming coat of red oxide including prepration of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises.

S&F non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic coloured tiles on vertical surfaces such as skirting, dados and risers to steps etc. size 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thickness (below or above ground level) and in any other situation and disposing the rubbish outside of cantt premises to low lying areas complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path/ floor finishing fair and even complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed.

M&L for machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for chequered cement concrete tiles coloured 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment complete in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) in kerbs or stops, blocks for fixing angles in wall rounded or chamfered on edges, water trought and the like including weathering slightly rounded and threatig including form work complete all as specified and directed.

M&L for precast reinforced cement concrete in cover slab for manhole, drain and connected works 1:2:4 type B-1 (using 20mm graded stone aggregates) including demolotition existing concrete complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, spirally for hooping for colmns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securig with clip complete all as specified and directed.

M&L for 600 mm dia reinforced concrete pipes class NP-2 laid and jointed including collar and demolition of old pipes complete all as specified and directed.

Supply only integral water proofing compound.

M&L Mild Steel work in framed brackets of angles or tees cut to shape, drilled, chajja projection and countersunk for screw, including bending and welding angles, as necessary , gusset plates, riveting etc and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L Mild Steel work as in purlins, framed trusses, main and cross beams, rails and festenings and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

buta singh and sons

KAILASH CONSTRUCTION CO

talwinder singh and co