Construction of Sub Divisional office for PHE Sub Division Anantnag, construction of create protection work at critical spots for WSS Reshi Mohalla Khandiphari under UT Capex.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

All kinds of soils

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :

Providing and laying of dry stone solling hand packed incluidng cost of loading unloading all sorts of carriage complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms,

Stairs (excluding landings) except spiral staircases.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 1st Class Foreign Wood Subject to actual details

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm thick 1st Class Foreign Wood Subject to actual details

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. foreign wood

Providing and fixing fly proof wire gauge shutters to windows/ doors and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 40 mm dia

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.1 1 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :

100 mm dia PVC waste pipe

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Providing and carrying out wiring for light point/fan point/exhaust fan point /call bell point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable insurface /recessed meduim class PVC conduit ,with modulars witch ,modular plate,suitable G.I box and earthing point with 1.50 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required (excluding cost of conduit).

Providing and carrying out wiring for heating point with 4.00 sq.mm FRLS PVC insulated copper conductor single core cable insurface /recessed meduim class PVC conduit ,with modular combined S&S 16 Amp .along with modular plate ,suitable G.I box and earthing point with 2.00 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required (excluding cost of conduit).

Providing and fitting of panel board with angle iron supports and A.C sheets for fixing of MCCB, change over switch ,bus bar etc.the job includes nuts bolts and embedding of supports in cement concrete blocks complete job.

Main Pannel Board

63 AMP MCCB

16 AMP MCCB

32 AMP MCCB

20 AMP MCCB

3 Phase volt meter

3 Phase indicator points

Two module stepped fan regulator

Supplying and fixing of 25 mm Ø medium class PVC conduit along with accessories insurface/recess including cutting of wall and making good the same in case of recessed conduit as required.

Supply of 200 mm nominal sweep exhaust fans including shutter from outside complete confirming to relevant indian standards

Installing, testing & Commissioning of ceiling Fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor single core cable etc as required

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN 16 (20 mm OD)

Providing and laying of armoured cable 35 mm, 3.5 core for main service line of reputed make. from main line to the main panel board including copper thimbles, earth work excavation and filling for laying of cable complete.

Providing and fixing PPR Unions PPR 20 mm Union

Providing & Fixing wash basin with Pedestal, C.I brackets etc complete

Hand-packing stones in wire-crates; excluding cost of crates and stones

Supply of Nallah stones for creat work

Dismantling D.I/C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineer- in-charge. Including excavation and refilling trenches after taking out the pipes. Above 150 mm diaupto 300 mm dia.

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 200 mm dia pipe

Dry stone pitching (any thickness) excluding cost of stones. On Slopes

Fixing charges of water storage tanks including carriage and cost of pipe specials as required. Complete Job. (Storage tanks to be supplied by department).

Providing, Installation, Commissioning and Testing of following items

15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931

15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Non-Telephonic Bath Mixer of approved make

50 Litre Geyser of approved make with connection pipes

15 mm Long Nose Bib Cock of approved make

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws.

Providing and fixing ply boards (12 mm) in planks of standard make for fixing/installing of wardrobe shelves, partitions etc as required and as per the directions of Engineer-in-charge including suitable beadings, necessary hinges, adhesives, nails etc.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm)

Supply of wire creats 4x4 incld. Kintting and all carriages complete job.

Carriage of material from source to dumping site at road by mechanical transport.

200 mm dia DI pipe Avg. 15 Km

Cement steel Avg. 05 Km

Sand and 20 mm Agg. Avg. 15 Km

40 mm Agg. Avg. Avg. 50 Km

Stone soing Avg. 15 Km

Bricks Avg. 10 Km

Extra Carriage of material from dumping site to actual site of work by Manual labour. Avg. 700 mtr

200 mm dia DI pipe

Quarry stone

Please Enable Macros to View BoQ information