SPL REPAIR TO JCOS MD ACCN (FAFA) BLOCK NO P-15 (NO OF DUS-06) AT ODF AREA UNDER GE (EAST) AGRA

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified & directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water complete all as specified and directed.

Material & labour 5 mm thick rendering in CM 1:3 concrete surfaces of ceiling etc, finished surfaced even & smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:4 with WPC on brick surfaces of walls & finishing the surface even & smooth at any height (n.exc 10m) incl necessary scaffolding /Centering etc complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for 20 mm thick cement plaster (on roof projection, chajja's, ceiling etc.) in CM(1:3) in two coat each 10 mm thick finished even and smooth without using extra cement complete all as specified and directed

M&L One coat of epoxy resin (FAIR BOND EP) on old concrete surface @ 0.30 kg/Sqm including preparation of surface as per as per manufacturer's instruction and applying 40 mm thick on ceiling, beams, chajjas & facia surface etc (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free sprey concrete plasticiser (spray crete) as per manufacturer's instruction with guniting machine of pressure capacity not less than 5kg per Sqm and finished the surface even & smooth in CM 1:4 plaster min. 10 mm thick complete all as specified & directed.

Supply and applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating, smart damp block 2k suprema or approved equivalent, having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing etc complete as per manufactures specifications complete all as specified & directed.

M&L for two coats of oil bound distemper over a coat of average 3 mm thick Birla putty on new plastered surfaces including preparation of surface complete all as specified and directed.

M & L for Preparation of new plastered surfaces of walls and applying two coats of Acrylic weather proof Exterior paint including at any height (not.exc 10mtr )incl necessary scaffolding /Centreing etc complete all as specified & directed.

Material and Labour for preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of ceiling and apply two coat of white wash complete as specified and directed.

M & L for complete removal old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a coat of 3 mm thick wall care putty complete all as specified and directed.

S&F in repairs plate rack of stainless steel , 1mm thick for kitchen or labotary, overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified & directed.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with sink coupling & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160 mm complete all as specified & directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc.and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections etc complete all as specified and directed.

Supply and Fixing 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all brass fittings and fixed complete to walls or laid in floors complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections etc complete all as specified and directed.

Supply and Fixing 25 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 including all brass fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S & F in repair PVC (SWR) floor trap, plain including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, including taking out of old unserviceable connections etc, connecting up new and making good disturbed portion complete all as specified & directed.

Supply & fixing in repairs C.P. grating 100/125 mm dia as reqd at site complete all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for issue under schedule of credit measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed.

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors, wall with suitable MS clamps confirming to IS 13592 complete all as specified & directed.

S&F in repair 75 mm PVC (SWR) bends any radius with acess door complete all as specified & directed.

S&F 110 mm bore PVC (SWR) Soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls, floor with suitable MS clamps . as per site requirement making good disturbed portion to match the existing complete all as specified & directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S&F in repairs 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls with suitable MS clamps making good disturbe portion to match the existing complete all as specified & directed.

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbed portion to match the existing complete all as specified & directed.

S&F in repairs 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbed portion to match the existing complete all as specified & directed.

Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles, cement plaster from roof surfaces etc including cleaning ,brushing and watering to joints and grooves and throwing the demolition materials/waste, debris away from the MOD Land etc complete and the roof of height n.ecx 11 mtr etc complete all as specified & directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.

Material & labour for cleaning the surface of the stone/concrete roof and slab with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface and removing complete all as specified and directed by Engineer in charge and applying one coat of sealer @ 0.2 kg/sqm with capacity of Drastic reduction in water absorption - ASTM C642-97 with Improved resistance to chloride penetration in concrete surface (RCPT) as per ASTM C1202 and Improved abrasion resistance of surface when tested as per ASTM C779 and low alkaline silicate based, first reacting with other free oxides and hydroxides like calcium hydroxide (free lime) inside the concrete to form corresponding silicates, which are stronger molecules. Total Solids Content 29-30% approx. Specific Gravity at 25°C 1.25 +/- 0.02 Ph Alkaline VOC Content Nil This sealer gels in the empty pores which is insoluble silica deposits. Finally forms a microscopic siliceous layers on the surface which results in strong ceramic coating, firmly bonded to the surface by strong silanol bonds. This is stable against UV and high temperature. Note:- (i) This item has to be applied on mother slab before laying any screed bed or PCC as a waterproofing process. (ii) This item shall be carried by authorised company by manufacturer.

M & L applying two coats of resin sealer @ 0.2 lit/sqm for each layerwith reinforced nanometer sized particles preventing “peeling off” effect from floor/bottom. It is advised to apply in following steps : first coat to be done on cleaned surface mixing with diluent as per manufacturer’s manual and after drying surface immediately final coat has to be applied on primed surface buffing can be further done for glossy surface complete all as specified & directed. Note :This item has to be applied on PCC or 10 mm thick plastered surface as a waterproofing process. This item shall be carried by authorised company by manufacturer.

M & L one coat of primer on well prepared surface as roof and parapet walls @ 0.2 lit/sqm (thickness = 0.85 mm )which is the combination of base and hardener water based epoxy system. It provides high hardness and abrasion resistance. It can be applied on dry or slightly damp substrates, without standing water. . After 24 hours of application of primer, and cleaning the surface with air blower, first coat of elastomeric pre-polymer hybrid chemistry based two component waterproofing membrane will be applied @ 0.2 lit /sqm for each layer (thickness = 0.85 mm) on roof and parapet walls. And second coat will be applied after 24 hours of first coat application etc complete all as specified & directed. Note-: this item shall be carried by authorised company by manufacturer.

M&L for applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg / RM on all corner joints of wall to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc complete all as specified & directed. Note-: This item shall be carried by authorised company by manufacturer.

S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand , 32 mm dia Waste coupling of PTMT (half or full threaded) etc complete all as specified & directed.

S&F in repair basin /Kitchen sink mixer single lever, cast copper alloy, fancy type, chromium plated without Pop up waste system with 450mm long braided connection pipe complete screwed down for 15mm bore GI Pipe complete all as specified and directed.

S&F in repair wall mixer with bend pipe for over head shower (3-in-1 system)cast copper alloy, fancy type, chromium plated with 210mm long bend pipe connecting legs and wall flange screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs 20 mm bore CP Gate valve, fancy type chromium plated, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixed in repair angular valve , 15mm dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed.

S&F in repairs 10litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, rubber bush, washers etc complete all as specified & directed.

Dismantling PVC water tanks exc 250 ltr but n.exc 500 ltr complete all as specified & directed.

Supply and fixing Rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position including fittings all as specified in SSR Part I (Capacity in litres 500) complete all as specified and directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

S&F in repair CP soap dish brass chromium plated, of approximate size 100 x 80mm, complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including taking out of old lime/cement concrete bedding, unserviceable connections etc connecting up new and making good disturb portion complete all as specified & directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

All as per item No 56.00 above but exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

S & F for rolled steel section as in door frame to receive the door shutter etc Fe 410-W (Gde E- 250) complete all as specified and directed.

M&L for factory made Pressed steel frames 125 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate, etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed.

S&F mild steel work for hold fast and similar small articles conforming to Fe 410-0 or Fe 310-0 including MS screws, bolts, including tarring with a coat of tar and sanding complete all as specified and directed.

M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc complete all as specified and directed.

S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified & directed.

Supply & fix Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed.

Supply & fix galvanized mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S & F in repair mild steel 100mm mortice lock device vertical type 4 levers with double keys for each lock etc complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified & directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed with screw/ welding (Size of hinges in 100 mm) complete all as specified and directed.

S & F, 150mm floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed

Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes complete all as specified & directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified & directed.

S&F for MS framed work as in Gates including pintle hinges, stops, rolling wheets, MS Sheets , handmade sliding bolts, grill/gratings, as in sliding gates etc. side hung type complete all as specified & directed confirming to Fe-410-O or Fe-310-O.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) weighing 0.55 Kg/M or frame size as per ground requirement complete all as specified & directed.

S&F powder coated of any colour (thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 No.) suitable handle (1 no.) complete all as specified & directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality, frosted on one side for window/ventilators in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F 4 mm thick sheet glass plain/frosted ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repairs Stainless steel drapery rods, 25mm internal diameter including decorative type brackets including fixing arrangement with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

M & L second class hardwood in scantlings timber framed screw to wall , rectangular , clean sawn, secured with nails or beads complete all as specified and directed .

S & F in repair of 25 mm thick block boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work or steel frame as in cupboard shelves, kitchen, cupboards etc including required butt hinges complete all as specified and directed.

S&F Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised (Size of hasp and staple in 125mm) confirming to IS 363 complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open ) 40 mm complete all as specified & directed.

S&F 100mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F in repair pre-laminated particle board 19mm thick, Exterior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves complete all as specified & directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.

S & F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws including necessary frame if required. Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed.

S & F soft close cabinet hinges kitchen cabinet/cub boards fix with screws and washres mild steel bright finish etc complete all as specified & directed.

S&F Magnetic Catch as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets etc complete all as specified & directed.

S & F 40 mm dia cup board knobs fixed with nut screws and washers of mild steel bright finish etc complete all as specified & directed.

M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for 5 cm thick sand stone slabs in sun shades, chajjas, plinth protection ,shelves, cills, landings, cover stones, templets incl cutting chases, pinning in brick work etc n. exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20 mm stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Cutting holes in brick wall built in cement mortor or cement lime mortor and stone wall built in lime mortor or wall of cement concrete of superficial area n. exc 150 sqcm and making good in cement mortor 1:3 or cement concrete 1:2:4 type B1etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic/Granite (floor, dado) including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

M&L for non skid ceramic coloured tiles (squre/ rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

As per item No 99.00 above but in dado/skriting etc including 10mm thick rendering in C.M. 1:4 complete all as specified & directed.

M&L for non skid ceramic coloured tiles (Premium quality) (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 450x300x7-8mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) complete all as specified & directed.

M&L, cement concrete 1:4:8 type D2 (40 mm graded stone aggregate)in foundation filling and mass concrete complete all as specified and as directed.

M& L 75 mm thick cement concrete type C-2 ,1:3:6 (40mm graded aggregate)using in plinth protection complete all as specified and directed.

M&L Varoda green marble stone 16-18 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms (min size 2.5 X 0.65 m) and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary screed bed/ backing coat and rubbing, polishing complete all as specified and as directed.

M & L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6. laid and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for kota stone slab 20-25 thick in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete. (Note :For Steps single piece kota stone to be placed.)

M&L providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) (nominal mix) for cover slab for manhole, drain covers, kitchen cooking platform and similar articals with plane faces incl, necessary fromwork complete all as specified & directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M & L for Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along the internal/external wall and wooden Cup board, shelves etc. wooden area should drill by 6 mm bit, Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit, gap between two holes is 45 cm to 60 cm. filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces. The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains. (i) Byfinthrin 20 % EC (Smell Chemical) (ii) CHLORPYRIPHOS 20 % EC (Smell Chemical) (iii) Imidacloprid 30.5 % SC (Odor less Chemical). The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 ( with using 40mm graded stone aggregate) as in fixing of post holes, foundation filling and mass concrete, complete all as specified and directed.

M & L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

S & F angle iron as in post and struts in fencing including embeding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. Hand rails, half round or other steel section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts for similar work confirming to Fe-290 Gde E-165 complete all as specified & directed.

M&L for PCC 1:2:4 type C-1 using 20mm graded stone aggregate as in coping including using necessary form work for fixing of chain link complete all as specified & directed.

Supply only GI chain link fencing any size or any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S &F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts n exc 10 cm and dia of shank 16-20mm complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broom finish complete all as specified and directed.

M&L in repair for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L in repair for 60 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately

M&L in repair for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 25 mm thick set, jointed & pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of existing green gas pipeline Approx 80 Rm including fittings connection ,cleaning and storage under custody of contractor ,refixing the same at same location as existing alongwith necessary fittings etc complete as specified and directed. Note : The dismantling will be done infront of user/executies and recorded for accounting before shifting to store.

M & L for washed stone grit plaster on exterior walls in two layers , under layer 12mm th cement plaster 1:4 ( 1 cement : 4 coarse sand ) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 Kg of cement per sqm , top layer 15 mm th cement plaster 1 :1 / 2 :2 ( 1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all around as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone shipping complete all as specified and directed.

Forming groove of uniform size 15 mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer incl. removal of wooden battens , repair to the edges of panels and finishing the groove complete all as specified and directed.

S & F in replacement for providing and fixing stainless steel (Grade 304) railing as per design/patterns apporved by engr-in charge/GE (inplace of old unserviceable MS railing) made of hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required ) and fitting the same with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangements complete all as specified and dfirected.

Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and including taking out existing unserviceable conduits or battens of any description with sunken boxes/junction boxes and all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.

M&L for Point wiring complete with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, MS sunken boxes incl modular duly painted with one coat of red oxide and one coat of black paint not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch

One 5 pin socket outlet 5 Amps on independent board complete all as specified and directed.

One 5 pin socket outlet 5 Amps on same board complete all as specified and directed.

One bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and directed.

One TV socket point wiring with cables RG-6 Coaxial cable complete all as specified and directed.

All as per item No 130.00 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm complete all as specified and directed.

Supply and fixing TV socket outlet, 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fix Switch piano flush button single pole two way 5 amps 240 Volts with polycarbonate body complete all as specified and directed.

Supply and fixing Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.

Supply and fixing socket 5 amps 3 pin flush type, 240 volts. with polycarbonate body complete all as specified and directed.

Supply and fixing socket out let, 6 pin 5 and 15 amps multipurpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

S & F stepped type electronic fan regulator socket type ISI marked on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.

Supply and fixing Bell push, flush type, 5 amp, complete all as specified and directed.

Supply and fixing call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed.

Supply & fixing LED Bulb 9W, white suitable for lamp holder complete all as specified and directed.

Supplying and fixing 20 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified and directed.

Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified and directed.

Supply and fix Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base complete all as specified & directed.

Supply & fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing LED security light compact & trendy of 35 watt with aluminium pressure diecast housing, IP 65 protection, luminaire lumens > 3000 lumens/W and in built electronic driver prewire upto terminal block with driver efficiency > 85 %, power factor > 0.95, as per IEC 61000-3-2, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, multi stage constant current operated driver with range 150-270 VAC and safety exra low voltage safe load < 60 VDC as per IEC standards with LM 70 & 80 certification complete all as specified, fixed to pole or wall of buiding with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 50x6 mm to be tightened with suitabe size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified & directed.

Disconnecting & taking up or down existing unserviceable sub main wiring of copper/aluminium conductor of any description, any size & in any position including taking out existing unserviceable conduits or battens of any description and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

M&L for sub main wiring using two 2x 6 sqmm single core PVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of dia not less than 20 mm with standard accessories along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor connected to earth dolly complete all as specified and directed. (Note : Two run of single core PVC cable with one run of earth conductor and conduit /batten shall be measured as one unit.)

Disconnecting and taking down old unserviceable distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.

S&F in repair sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug top with one SP MCB 20 Amp 240 volt complete all as directed complete all as specified and directed.

Supply and fixing MCB SP 1 to 32 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40 to 63 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering, GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. Notes:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Supply, fixing, connecting & testing Exhaust fan heavy duty, copper wound CI body single phase 230V, of size 300 mm sweep,1400 rpm with louvered shutters including necessary fixing arrangements on wall with & including bracket nut and bolts and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic copper wound complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

Supply, fixing, connecting & testing ceiling fans copper wound complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply, installation, testing and commissioning of indoor type wall mounting size min (830 X 1100 X 245mm), Polycarbonate CPRI approved OEM made Meter Panel suitable for 06 (Six) meter. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel type wall mounted on mounting structure RAL 7016. The meter panel should be anti-acid & anti corrosive & fully transparent Door for meter vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of CPRI test report in polycarbonate only degree of ingress protection IP65 in accordance with IEC 60529. The gasket should be internally embedded made of polyurethane and enclosure make. The manufacturer of board/panel shall submit a copy of type test report of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1 complete all as specified and directed. Note : Re-fixed the energy meter in new meter cabinet including all necessary electrical connection. General Specification & Electrical Parameter:6 METER DB-2 Ref No. 2236 / 2023(REV-1). Type of Panel: -Thermoplastic Polycarbonate. Panel Size: -830x 1100x 245mm, Degree of Protection: -IP65(EN60 529) SystemVoltage : 415V,50Hz, 4wire+E Installation: -Indoor Floor mountingCable Entry: -Incoming/outgoing from bottom. Finish Shade: -Enclosure & Accessories: RAL 7035 Mounting structure: RAL 7016Incomer: 125 A, FP 25mA MCCB-01 NosOutgoing: 32A DP 10kA MCB – 6 Nos(5-32) A, 1Phase PREPAID ENERGY METER-6 Nos (Provision Only)Terminals- 10SQMM TERMINAL BLOCK- 12 Nos, 10SQMM TERMINAL BLOCK- 6 Nos, RECOMMENDED CABLE: - Incoming- I/C- 4CX35/50 Sq.mm cable (125A)O/C- 3CX6 Sq.mm cable (32A)

Supply, fix and installation of electric water heater, storage type made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology S/S inner tank and heating element heavy duty magnesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW capacity,230 V, 1 Phase AC, 50 Hz, 50 litre, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating element offers superior heating performance and resistance to oxidation and carbonation at high temperatures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.

Balaji Associates (BID ID -3052783)

3Krishna Enterprises (BID ID -3055957)

HARI BUILDERS (BID ID -3056771)

VARDMAN ENTERPRISES (BID ID -3054630)

M/S SANJAY AGARWAL (BID ID -3056520)

Attar Singh and Sons (BID ID -3056584)

M/s J S & SONS (BID ID -3064998)

Gupta Automobiles (BID ID -3079898)