Repair to joinery, false ceiling, roofing and other Misc maintenance works at NKP, 8LU, 11 ASC, 3 AFSR, Site C and MES Complex at AF Stn Borjhar under GE (AF) Borjhar

Amount

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges, etc. complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof covering complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in ridges of roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position complete all as specified and as directed.

M&L for second class hard-wood in timber scantlings, clean sawn, unframed and fixed complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for 2nd class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps, planed both sides with butt joint, fixed with nails to timber frame/roof member complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber work complete all as specified and as directed.

S&F in repair mild steel knobs for cup boards, etc. complete all as specified and as directed.

S&F continuous (piano) hinges of size 30mm wiidth of flap (when open), mild steel, bright finish complete all as specified and as directed.

S&F in repair 100mm long hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F for aluminium Mortice lock, vertical type of size 75mm, 4 levers, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

S&F anodised aluminium snap grid frame work of size of grid 605 x 605mm for false ceiling complete all as specified and as directed.

Taking down cement plaster on brick wall or stone wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick plastering on fair faces of brick work or concrete surface in cement mortar (1:4) mixed with WPC by weight of cement as per manufacturer's instructions, finished the surface even and smooth without using extra cement for sunken slab complete all as specified and as directed Note: WPC will be mesured and paid separetely

Supply only Integral water proofing compound, best quality (ISI mark) complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastred surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks using old size bricks, stright or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

S&F in repair 20mm dia curtain rails, of anodized aluminium alloy with fixing brackets complete all as specified and as directed.

Taking down wall panelling and similar work in any position complete all as specified and as directed.

S&F wooden grain printed solid PVC wall panelling sheet of 5mm thick inclusive of solvent cement and fixing on PVC frame as per specifications and drawing including PVC fillets and PVC strips as required complete all as specified and as directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n. exc. 1.5 sq.m each and removing from the site including cutting holes as required for taking out existing hold fasts, etc. complete all as specified and as directed

All as per Serial item No. 29 here-inbefore but exc. 1.50 Sq.m n. exc 4 Sq.m.

Taking down shutters of any description n. exc. 1 sq.m each including iron mongery, serviceable shutters keep aside for re-used and removing unserviceable one from site complete all as specified and as directed.

Taking down shutters from the frame exc. 1 sq.m and n. exc. 2 sq.m each for cutting of bottom rail/shutter and finishing properly for re-fixing serviceable shutters and removing unserviceable one from site complete all as specified and as directed. NOTE : Re-fixing shall measured and paid separately.

Re-fixing serviceable shutters in same opening after easing/adjusting of any description, n. exc. 1.0 Sqm each complete all as specified and as directed

All as per Serial item No. 33 here-in-before but exc. 1 Sq.m and n. exc. 2 Sq.m each and re-fixing in same opening of serviceable shutters

S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F for MS work of flat iron of size 30mm x 6mm thickness as in hold fasts, etc. confirming to Fe-410-0 (Grade-E-250 quality-A) complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as sprcified and as directed.

M&L for sanding newly tarred opr painted surfaces with clean sharp sand complete all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube and edges will be painted to match will printed sheet fixed in opening as per specification and drawings complete all as spcified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F MS butt hinges 75mm long, medium weight, cold rolled complete all as specified and as directed.

S&F for 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

M&L for 2nd class hard wood, 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick second class hard wood glazed and skelton shutters for window and ventilators, etc. open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay, wheel and all other fittings complete all as specified and as directed.

S&F 20mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides for cup board, etc. complete all as specified and as directed.

S&F anodised aluminium frame work as in partition wall, doors, windows, chowkhats, etc. with one or more rebates including joining beads, cleats for fixing, etc, weight not less than 0.55Kg/Rm complete all as specified and as directed.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F for anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.

S&F for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sq.m in each pane complete all as specified and as directed.

M&L for anodized aluminium DECO grill, made of 6mm dia aluminium bars, size of mesh 50mm x 50mm, fixed with aluminium frame of size 50mm x 50mm x 1.9mm thick for aluminium windows complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated (designation No. 3) universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and as directed.

S&F for 300mm long MS helical door tail pattern springs including roller and roller plate and fixed as in repair complete all as specified and as directed.

S&F for floor door stopper of aluminium alloy body and tongue, anodised, 150mm in over all length of cover plate with hard drawn steel spring, fixed to shutter complete all as specified and as directed.

S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden bead for wooden frame or steel frame in square not exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F in for galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F for 300mm length aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

S&F for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed C-21 complete all as specified and as directed.

S&F for aluminium handles, cast type, anodised size of handle 150mm complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description ) from metal or wooden frame including punching or drilling out old glazing pins/spring clips or fixed with putty or beads copmlete all as specified and as directed.

S&F mild steel work such as guard bars and similar work conforming to Fe -290 Gd-E-165 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:4) for receiving tiles complete all as specified and as directed.

M&L for glazed ceramic colour tiles of size 350 x 250x 7 mm or 450 x 350 x 7mm thick fixed as on vertical surfaces, such as dado, skirting, etc, set and jointed in neat cement slurry and pointed in white or colour cement to match with the tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directred.

Repair to aluminum door shutter of any description and any position including taking down and refixing the same at same with necessary adjustment to the door spring, door closer, rubber beading, glass, etc. complete all as specified and as directed.

S&F in repair rubber beading for aluminum glazed doors complete all as specified and as directed.

Taking down rolling shutters of any description exc. 2 sq.m but n. exc. 6 sq.m each and removing serviceable one to store from site and removing unserviceable from site complete all as specified.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type , thickness of laths 1.25mm complete all as specified and as directed.

S&F ball bearing for rolling shutters as per existing size and make complete all as specified and as directed.

B S ENTERPRISE

M/s Pragland Abhiyanta

M/s A R Traders

M/S Trio Engineers And Builders

M/s Torrent Inc

MOINUL HOQUE CHOUDHURY