SPECIAL REPAIRS TO INTERNAL ELECTRIC WIRING WITH FIXTURES IN MT SHED BLDG NO P64 P65 P69 AND P74 TO P80 OF 210 RKT REGT AND EXECUTION OF CERTAIN EM MINOR WORKS AT NASIRABAD

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:- Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

One light point/bell point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

All as per item No. 4.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge. Make:-Havells/Anchor/Legrand

S&F switch piano flush type 15 amps, single pole one way 240 volts complete all as speciied and directed by Engr-in-Charge.Make:-Havells/Anchor/Legrand

S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as speciied and directed by engr-in-Charge. Make:-Havells/Anchor/Legrand

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all as speciied and directed by Engr-in-Charge. Make:-Havells/Anchor/Legrand

S&F ceiling fan regulator electronic flush , steped type (four step) 230 Volts AC complete all as speciied and directed by Engr-in-Charge. Make:-Havells/Anchor/Legrand

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by engr-in-Charge . Make:-Havells/Anchor/Legrand

S&F LED tube light fitting in acrylic linear tube (1x 20 watt), 230V for single LED tube light including 1 x 20 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make Havells Cat part No LHLDDCXCML8Q020 (for tube) LHFXCENNTN1W020 (for batten) or equivalent make and model from Philips/Crompton/Bajaj as approved by AO.

S&F LED light fitting 1X10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Havells/CG

Supply, fixing testing and commissioning energy saving street light luminaire 35 watt LED , aluminium pressure die cast housing with tughened glass cover with individual LED lence , IP 66 protection complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model of Surya/Control& Switchgear/Bajaj

S&F street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed.

Taking down existing ceiling fan , dismantling blades and refixing after cleaning & minor repair including conecting up with three core flexible cable from ceiling rose to fan.

S&F of MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed by Engr-in-Charge. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB TPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB vertical distribution board triple pole & neutral with 200 Amps rated bus bar, single door IP-43 DB's made out of sheet steel enclosure ,reccessed type , factory made powder coated 4 way ,440 volts suitable for housing MCB's complete all as specified and directed. Make: Havells/Legrand/Schneider

S & F of MCCB TPN 415 volt,125 Amp capacity , 10KA , 'C' curve complete all as specified and directed. Make: Havells/Legrand/Schneider

S & F of MCB TP, 240 volt, 63 Amp capacity , 10KA , 'C' curve complete all as specified and directed. Make : Havells/Legrand/Schneider

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type C-2 and RCC 1:2:4 type B1 cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing, complete, all as specified & directed.

Supply , laying and testing 1100 volt grade heavy duty cable XLPE insulated , armoured cable with stranded aluminium conductor of size 16 Sq mm 4 core including taking down old unsv cable complete all as specified and diected .

Supply , laying and testing 1100 volt grade heavy duty cable XLPE insulated , armoured cable with stranded aluminium conductor of size 10 Sq mm 2 core including taking down old unsv cable complete all as specified and diected .

Supply, laying and connecting 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq mm 4 core nominal cross section.

Excavation in trenches in any type of soil not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.

Returning, filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 M above the starting point all as specified and directed.

Supply and laying of bricks old class ‘B’ as protect on to UG cable laid flat adjoining to each other width wise all as specified.

Supply and laying GI tubing 40 mm bore, light grade with all fittings, laid in trenches/under floor or fixed on pole/on wall for cable protection. Make : TATA/JINDAL/Swastik/Prakash surya

Supply, installation & testing of evaporative desert cooler, steel body electric driven suitable for single phase, 230 Volts, AC 50 Hz supply having minimum air flow capacity 4000 Cum per hour complete with fan, motor and pump (or nearest size) . Make: Kaitan/Symphony/Baja/Usha/Voltas

M&L for 4040x6mm angle iron stand , removable, design as approved by the Engr-In-Charge including cutting and welding etc for desert coolers duly painted with two coat of aluminum paint over a coat of red oxide primer, complete all specified & directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, 1100 volt grade in PVC casing caping fixed to roof/wall/ceilingall as per site requirement with all fixing arrangements like screw, tee, socket, bends etc complete with sunk type anodised terminal box thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 3 pin 5 Amp socket control by one one way switch. Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC casing-caping -AKG/Plaza/Kalinga

Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ 'L' or 'J' type hook complete all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified.

M&L for old size brick work with sub class B bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified.

M&L for machine pressed precast concrete reflective type interlocking paver block any shape and size confirmeing to IS-15658-2006 of 60 mm thick, M-35 grade with grey cement and pigment over 50 mm thick sand cushioning, etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges in any description complete all as specified and directed.

M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), over 25 mm thick PCC type 1:2:4 type B-1 using 20mm graded stone, complete all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series, complete all as specified and directed by Engr-in-Charge. Make: Havells/Bajaj/Legrand

S&F storage type electric water heater single phase 230 volt, stainless steel tank, vertical type of capacity 25 Litre, 5 star BEE rated complete as specified and directed by Engr-in-Charge. Make: Racold/Havells/Bajaj/Crompton

Supply and fix inlet outlet PVC reinforced connection pipes 450 mm long with chromium plated washers complete all as specified and directed.

S&F on wall/roofs/ceiling GI tubing "medium" grade 15 mm bore including necessary screwing and all fittings (Tee,union, nipple, reducer, elbow etc) as required at site complete as specified and directed by Engr-in-Charge. Make : TATA/JINDAL/Swastik/Prakash surya

S&F on wall/roofs/ceiling GI tubing "medium" grade 20 mm dia including necessary screwing and all fittings ( Tee, union, nipple, reducer, elbow etc) as required at site complete as specified and directed by Engr-in-Charge. Make : TATA/JINDAL/Swastik/Prakash surya

Sypply and fixing chromium plated bib taps with capstan heads, screwed down for iron pipes 15 mm dia complete as specified and directed by Engr-in-Charge.

Supply and fixing stop valve chromium plated , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe 15 mm dia complete as specified and directed by Engr-in-Charge.

S R ELECTRICALS

M/s Shiv Builder and Suppliers

MITTAL ENTERPRISES

M/s SUNIL ENTERPRISES

kirtiman traders