Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various Sub-stations at Kolar Operation Division

Place

Designation

Name of the Company

Contact No.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE- II TECHNICAL DEVIATION

Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-3)

Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.

Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

Please don’t insert your Bid values here or else your bid will not be considered for evaluation.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Dear Sir,

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents, For Tender for Design, Manufacture, Testing and Supply of C- Type Wedge Connectors for Various sizes required for replacement of age old bolted type connectors in TL&SS Divisions of Hassan Transmission Zone. These deviations and variations are exhaustive.Except these deiviations and variations, the material shall be supplied as per specification and documents.

Note : Deviations specified elsewhere in the specification will not be considered.

Place

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE- III COMMERCIAL DEVIATION

Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-3)

Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.

Please fill Only in the Light Blue Couloured Box

Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE

Dear Sir,

I have read each of the Clauses mentioned in INVITATION FOR BIDS , INSTRUCTION TO BIDDERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents Tender for Design, Manufacture, Testing and Supply of C- Type Wedge Connectors for Various sizes required for replacement of age old bolted type connectors in TL&SS Divisions of Hassan Transmission Zone. These deviations and variations the matrix shall be suppliedas per your specifications and documents.

Note : Deviations specified elsewhere in the specification will not be considered.

Place

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE- IV QUALIFYING REQUIREMENT DATA

Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-3)

Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.

SHEET FOR TECHNO-COMMERCIAL OPENING

Please don’t insert your Bid values here or else your bid will not be considered for evaluation.Please fill only in blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

Bid Reference

Bidders Name and address :

Following (mentioned below) is the list of earlier order for

which are being furnished by us in the support of qualifying requirements for Tender for Design, Manufacture, Testing and Supply of C- Type Wedge Connectors for Various sizes required for replacement of age old bolted type connectors in TL&SS Divisions of Hassan Transmission Zone.

Turnover of the company for the past 5 years.

Capacity as in qualifying requirements.

Supplies done over the past 5 years.

Place

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE V Bid Form

Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-3)

Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.

TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE

Having examined the Bidding documents including Addenda Nos.

(Insert Number of sheets), the receipt of which is hereby duly acknowledged, we, the

undersigned, offer to supply and delivery

(description of goods and services in conformity with the said bidding documents and as

per the price schedules furnished in a separate sealed price bid.

We undertake if our bid is accepted, to commence delivery within

(number) days and to complete delivery of all the items specified in the contract within

(numbers)days calculated from the date of receipt of your notification of Award

we agree to abide by this bid for a period of 180 days from the date fixed for bid opening under

clauses 16 of the instructions to bidders and it shall remain binding upon us and may be

accepted at any time before the expiration of that period.

until a formal contract is prepared and executed, this bid together with your written

acceptance thereof and your notification of award shall constitute a binding contract .

between us

Place

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE VI -ASSESSEMENT OF FINANCIAL CAPABILITY OF NEW FIRMS (who have not supplied to KPTCL earlier)

Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-3)

Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.

TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE

Place

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - VII Commercial Terms and Conditions

Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-3)

Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.

TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE

Place

Name of the Company