SPL REP TO BLD SECURITY LIGHTS AT INS TUNIR, SPL REP TO WATCH TOWER SEARCH LIGHTS, SPL REP TO CENTRALISED AC PLANT OF URAN MISSILE WORKSHOP AT NAD (BLDG PORTION) AND PROVN OF MULTIPURPOSE STAGE TO HANDLE WIDE RANGE OF FUNCTIONS AT NCS SCHOOL AT NSK

Amount

Demolition of cement concrete (unreinforced) floor of any description and any position not otherwise specifically provided for complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L PCC 1:2:4 type B-2 100mm thick using (40mm graded crushed stone Agg) as in sub base , complete all as sfd and as directed by Engr in Charge.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete.

M & L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350mmx250mm x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes complete all as specified and as directed.

M&L for green marble 17/18 mm thick machine cut in skirting / dado,window sill, laid over cement screed, jointing and pointing with white cement slurry complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) and setting in mortar (1:6) demolition of stone or block or brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.

M&L for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4) including WPC by weight of 3% of total cement content) , finished even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured separately

Supply only integral water proofing compound.(ISI mark) complete all as specified and as directed

M&L for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and as directed

Material and labour for preparation of new plastered surfaces of walls and applying two coat of oil distemper over and including 3mm thick wall care putty, and filling cavities with wall care putty filling after completely removal of existing treatment complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain/camouflage pattern on one coat of primer complete all as specified and as directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M&L prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint of plain/camouflage pattern complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M&L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one coat of aluminium paint on steel surfaces complete all as specified and directed.

M&L Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position. Complete all as secified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 30mm thick second class hard wood plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed.

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified.(minimum thickness of powder coating 50 micron)

S&F for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar,/sliding shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified . (Note wire mesh and glazing will be paid separately under relevant item. Thickness or powder coating not less than 50 micron)

S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

S&F for aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L for 4 mm thick plain glass sheets ordinary quality in squares n exc 0.5sqm each pane fixed with aluminium frame work etc all as specified and directed.

S&F for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed. Make- Deco grill or equivalant

S&F butt hinges size 100 extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21 complete all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material exc 1.50 km but n exc 5km and depositing where directed for soils

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete.

M&L Brick work with burnt clay bricks(old size) in cement mortar 1:6 , with subclass 'B' bricks, straight or curved in plan exceeding 6 m mean radius.

M&L Preparation of newly plastered surfaces and applying two coats cement base paint on walls over a coat of alkali resistant primer.

M&L Formwork to sides and soffits of rough finish surfaces of concretefloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc all as specified and directed.

M&L Cement concrete 1:1.5:3 type B2 using 20 mm graded stone aggregate as in beams.

M&L MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement.

Ditto but 5 mm dia and over upto and incl 10 mm dia in stirrus, spaces, and binders.

M&L Sand filling under floors or in foundations incl watering and consolidation

M&L for Hardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface.

M&L100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L Granite(of any type)tiles 20mm thick as in floors and similar works over 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete.

Supply and fix high intensity, long range, weather & dust proof security search light with highly polished stainless steel reflector-cum-body, suitable heat sinks, toughended front glass, retaining ring, M.S cradle with passivated bolts, The search light woujld be supplied with 230V 150W LED COB lamp & its electronic driver in cast aluminium housing. The search light would be swivelling type & have both verticle and horizontal operational controls. The search light would be supplied with 1 metre tripod stand with castrol wheels for ease of movement inside the tower cabin. Also provide the one additional electronic driver and 150W LED COB Lamp. Make Sigma Type No 24441-TS, Range 400m-500M, Copper cable 5 mtr long required for connection from search light to Socket point complete all specified and directed.

Point wiring with single core 1100 volts grade 2.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code drawn through casing capping with all accessories including accessories like sunken box, hylam/mansonite sheet etc, complete all as specified in and including 2.5 Sqmm PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour) to common earth and connecting to earth dolly complete all as specified and directed by engr-in-charge for 15 Amps switch socket controlled by 15 Amps switch.

S&F Switch socket combination 2 in 1 3 pin, 5 A and 15Amp flush type universal

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

Submain wiring with 2 x 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code drawn through conceiled pvc conduit with all modular accessories like metal flush box, cover plate frame plates of suitable sizes Complete all as specified in and including 1.5 Sq mm PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour)to common earth and connecting to earth dolly for the following NOTE- The rates includes for Neccessary wall cutting chasing and all accessories items.

S & F switch piano type single pole one way, 6 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals

Supply and fixing LED building security light 45W with pressure die cast housing fitting with IP 66 protection LED make bajaj ct pt no-ENXT P45L WW CR PC SD or equivalent in Havells/CG.

Supply and fixing XLPE cable insulated, armoured heavy duty electric calbe with aluminium conductor, 1100 volts grade, cross sectional 6 sqmm 2 core, saddle on wall to connect with bldg security light complete all as specified and directed.

Supply and fix DB 2 way single pole and neutral complete all as specified and directed.

Supply and fix GI tube 32mm dia light grade for making bracket suitable for fixing building security light of 45 Watt complete all as specified and directed by Engr-in-Charge.

Supply and fix MCB SPN 20 Amps, 50 Hz, 240V AC, complete all as specified and directed.

M/s S.D Construction Co

Dinesh Enterprises