GE (N) P/T - 94 OF 23-24 SPL REP OF BLDG NO. P-6-8/A (COOK HOUSE CUM DINING HALL) AND REP TO DRAINAGE/SEWERAGE SYSTEM UNDER AND IN FRONT OF COOKHOUSE CUM DINING HALL) AT 752 TPT COY ASC (CIV GT) AND MW WORK IN THE AREA OF AGE B/R(E) UNDER GE (N) PUNE

Amount

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

M& fabrication for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/loose soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm complete all as specified and directed.

M&L for cement concrete type C1 (1:3:6) using 20mm graded aggregates as in post holes complete all as specified and directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for moorum filling in floors with moorum brought from outside MD land, laid in layers n. exc 15 cm thick spread, levelled and rammed including watering etc complete all as specified and as directed.

Removing building materials etc to a distance of 1.5km incl loading and unloading and stacking at the destination. and depositing where directed by Engr-in-Charge.

M & L for Anti termite treatment of soil under existing floors using Chloropyriphos 2% EC emulsion at the rate 1 liter per hole, 300mm apart including drilling & plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre incl drilling and plugging holes etc in apron.to match the existing floors complete all as specified and directed.

M&L for broken stone hard core of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rolled, rammed to a true surface all as directed.

M&L for 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base.

M&L for 25mm thick PCC (1:2:4) type B- 0 (using 20mm graded stone aggregates) as in sub base, levelling course etc. complete all as specified and as directed.

M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in Skirting /dado set & jointed in neat cement slurry & pointed in coloured cement to match including 10 mm thick back coat in CM 1:3 complete all as specified and directed.

M&L glazed ceramic coloured tiles of size 600 x 300 x 7mm / 450 x 300 x 7mm / 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles of size 300 mm x 300mm x 7 to 8 mm thick in floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:4) all as specified and directed.

M&L for hand cut kota stone slab flooring 20-25 mm thick over 20mm thick cement screed base of CM 1:6 and laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection fixed even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 150mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping, benching, bed blocks and the like including using necessary form work including demolition of existing concrete all as specified and as directed.

Supply and fixing GI chicken wire mess at the junctions of wall/column/ beam at suitable size to avoid cracks before plasteing at the areas required all as specified and as directed

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/ block work or concrete surfaces mixed with integral water proofing compound in the proportion as per manufacturere's instructions, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Supply only integral water proofing compound.

Supply and fix in repair for factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repair for factory made 50 mm thick, 600mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repair for factory made 50 mm thick, 450mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repair for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete bedding and making good to floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate and all necessary fittings, connections to trap, inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin, white, flat back, size 580x450 mm including CP waste coupling, cp pillar tap ,chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required length, pair of MS angle iron brackets or MS fastener bolts, 15mm dia PVC connection 450mm long including PTMT check nuts etc and all necessary inlet outlet connections complete all as specified and as directed.

Supply and fix vitreous China half stall type, white bowl urinal flat back, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, including 5 ltrs capacity PVC automatic flushing cistern with brackets, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

Material and labour PVC (SWR) floor trap, 75mm dia of outlet,plain with SS grating including joining with solvent cement complete all as specified and as directed.

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix for 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down 20mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix 20 mm brass gun metal globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed .complete all as specified and as directed.

S&F in repair 15mm dia brass chromium plated fancy type, pillar tap with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. Make: Jaquar Cat No.VGP-81021N

S & F in repairs long body 'U' shaped sink taps cast copper alloy with chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed bore of pipe 15mm in kitchen sink or counter sink or basin.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

M&L for 15 mm bore fancy type stop cock chromium plated cast copper alloy with wall flange complete all as specified and directed

M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.

S&F towel rail 600mm long of PTMT fixed with and including chrome plated brass screws and wooden /plastic cleats weight not less than 190gms.

Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked.

M&L PVC connection 15mm size with PTMT nuts of length 600mm

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory Made Solid PVC Moulded shutter shutterof 30 mm thick, consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in styles rail, ,with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC prelamenated Sheet on the front face & 5mm thick Plelaminated plane PVC sheet on back face.Inside core shall be of PVC solid board of 20 mm thick. Door shall be providede with 20 mm thick Pvc lipping all around the edges , fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section fixed with stainless steel screws complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quality and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed by Engineer-in-Charge.

S&F 4.80 mm thick tinted glass including rubber beading for securing sheet glass in aluminium frame work complete all as specified and as directed.

M&L for powder coated aluminium anodized sections for partition wall/frame with one or more rebates glazed fixed or sliding consisting of various aluminium sections of appropriate weights as specified and directed, including glazing clips, suitable Nylon gasket, etc complete all as specified and as directed.

S&F fully glazed single/double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel etc sections as given below and all as specified and directed by Engineer-in-Charge.Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)

Supply and fixing in repairs Door closer hydraulically regulated designation No-2 universal type ISI marked suitable for door shutter of weight between 36 to 60 kg, cast iron body complete and all as specified. Make : Heera/Ashokas/Universal

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each

Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes etc and getting out in soft and loose soil

M&L PCC (1:4:8) type D-2 ( 40 mm graded stone aggregate) as mass concrete as in foundation, mass concrete work.

Demolition of brick work / stone masonry / precast block masonry built in built in cement mortar or cement lime mortar

M&L for PCC precast soild block masonry exceeding 10 cm in width built in CM (1:4) of Gde C-1 type 1:3:6 (20mm graded aggregate).

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete wall surfaces in CM (1:4) finished fair and even with out using extra cement.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for applying two coats of OBD of any tint over a coat of primer and 1mm wall care putty over new plastered wall surface complete all as specified and directed.

M&L 2 coats of synthetic enamel paint on old wooden surface including preparation complete all as specified and directed.

Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 10mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair Drapery curtain rod of Stainless steel 25mm dia covered with PVC coating complete with SS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw compete all as specified.

S&F in stainless steel plate rack of size 1500mm X 1800mm X 600 mm made with 1mm thick Super Steel 204 all as specified as approved by GE

M&L Preparation of new plastered surfaces of walls & applied one coat of primer primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ratio 5:4:1 followed by application applying two coats of modified acrylic apex exterior emulsion paint which shall give 5 year of performance warranty, (Make : Burger/Nerolac/Asian paint), complete all as specified & directed.

S&F in repair RCC pipes class NP-2 laid and jointed complete with collars with following sizes 200mm bore

S&F in repair RCC pipes class NP-2 laid and jointed complete with collars with following sizes 300mm bore

S&F RCC pipes class NP-2 laid and jointed complete with collars with following sizes 450 mm bore

S&F RCC pipes class NP-2 laid and jointed complete with collars with following sizes 600 mm bore

Concrete bed to drain pipes including packing under and completely surrounding pipes with cement concrete (1:4:8) type D-02 after they are laid and tested; inbore of pipe 200 mm

M&L concrete Bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cement concrete 1:4:8 type D2 bore of pipe 300mm

M&L concrete Bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cement concrete 1:4:8 type D2 bore of pipe 450mm

M&L concrete Bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cement concrete 1:4:8 type D2 bore of pipe 600mm

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm in dense/hard soil

Removing the excavated surplus soil exceeding 1.5 km and not exceeding 5 KM depositing out of MoD Land.

M&L PCC 1:2:4 B-1 using 20mm stone graded aggregate as in coping, benching , haunching etc.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

M & L for RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) in cover slabs, for manholes , culverts slabs etc set in cement mortar 1:6, including use and waste of form work (einforcement shall be measured and paid for seperately) all as specified.

S & F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in-Charge.

Ditto all as per item no 109 here in before but 6mm to 8mm dia

M & L for PVC (SCH-80) (SWR) Pipe 110 mm bore as in spouts etc complete all as specified by Engr-in-Charge

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level)

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and directed.

M/L 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation complete all as specified and directed.

S/F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive s/s wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed

S & F Stainless steel wire cloth ISI marked, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples all as specified & directed.

S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

Dismantling of stone slab of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing Apron etc complete all as specified and directed

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

M&L 75mm thick cement concrete 1:4:8 type D-2 (40mm stone agg) as in Subbase

M&L for cement concrete type C1 (1:3:6) in foundation using 20mm graded aggregates as in post holes complete all as specified and directed.

M & L for old size fly ash brck in CM 1:6 . straight or curved on plan exc 6M mean radius , built in CM 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4) finished with sponge finish & applying two coats of cement base paint over one coat of primer.

M & L Textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) complete, all as specified. Make:- Johnson Endura textured design or equivalent of Kajaria/Somany).

Material and labour for designer coloured glossy rubber moulded chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs complete all as specified and as directed.

Supply and fix for rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment etc. conforming Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed. .

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

M&L 2 coats of synthetic enamel paint over a coat red oxide primer on newly steel surface including preparation complete all as specified and directed.

S&F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified. make. Bluestar/Nirali

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters ,shelves,frame work for cupboard shall be fixed as approved by GE suitable for cup board etc. complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Continuous (piano) hinges, stainless steel, ISI marked Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

M&L for 150mm bore dia RCC pipe class NP2 laid and jointed in cement mortar with collars and tested complete.

M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe after they are laid complete.

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in brick/stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

Description all as per 138 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Supply and fixing 20/22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ

S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.

Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan including taking down old unsv fan and depositrd into E/M store yard complete all as specified & as directed.

S & F for metal body exhaust fan, AC single phase, 240 V of size 450 mm sweep, frame , blades with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan and deposited into E/M store yard complete all as specified and as directed

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.

Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in brick/stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, three phase 440 V, 50 Hz, made out of MS/ CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1- 1.5 m/sec air velocity at floor level for door opening of size 40"x78" as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly complete all as specified and directed for the One light point controlled by one, one way switch 5 Amps

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 2.5Sq mm nominal area and drawn through PVC non metallic rigid PVC heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated 1.5 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.Note:- Two runs of 2.5 sqmm cable,one run of 1.5 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement and accessories will be measured as one unit

Supply and fix electric water heater, storage type shock proof with Glass line inner tank (rust proof) and heating element upto 2 KW capacity 50 litre, temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 16 Amps shock safe safety plug connected with 3 core cable of suitable size / length, including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department. Make- Bajaj Model Calenta Digi , Havells Model- Monza Digi or equivalent in Jaguar make.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates

R k construction

M/S Eknath agencies

AJINKYA VIKRAM GAIKWAD

Sai Construction

M/s.BAJRANG CONSTRUCTION

SAGAR ENTERPRISES

THE SAIRAM CONSTRUCTIONS

K.K.Enterprises