Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹15.0 L+₹78,740 (5.56%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
1 Apr 2020, 6:00 pmClosed
GE of GE SOUTHAKHNOOR
GE SOUTH AKHNOOR C/O 56 APO PIN- 900234
REPAIR/ REPLACEMENT OF RISING/ DISTRIBUTION OF WATER SUPPLY LINES, CONTROL VALVES AND CONNECTED ITEMS AT VARIOUS LOCATIONS UNDER GE (SOUTH) AKHNOOR.
2020_MES_325316_2
NIT-49
Open Tender
Pipes and Pipe related activities
Item Rate
180 days
GE (SOUTH) AKHNOOR
Class E and Category a(ii)
8 documents required · 8 mandatory
₹500
GE SOUTH AKHNOOR
₹30,000
Yes
17 Jun 2020
16 Mar 2020
3 Apr 2020
16 Mar 2020
1 Apr 2020
20 Mar 2020
Amount
SCHEDULE 'A' PART-I : BOQ OF WORKS FOR E/M WORKS.
Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, for laying pipe line etc, complete all as specified and as directed by Engineer-In-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge.
Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.
Taking up unserviceable cast iron/ galvanised iron/ ductile iron water mains (including all fittings) of 200mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.
Taking up unserviceable cast iron/ ductile iron water mains (including all fittings) of 150mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.
Taking up unserviceable cast iron/ ductile iron water mains (including all fittings) of 100mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.
Taking up unserviceable cast iron/ ductile iron water mains (including all fittings) of 80mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.
Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 200mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.
Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 150mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.
Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 100mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.
Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, size 80mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.
Laying only cast iron pipes with spigot and socket ends centrifugally cast, any class, size 200mm bore, in any length, including short lengths, cutting, jointing and jointing materials, laid in trenches, complete all as specified and directed by Engineer-In-Charge.
Description all as serial ietm No- 1.12 here-in-before but for 150mm bore pipe.
Description all as serial ietm No- 1.12 here-in-before but for 100mm bore pipe.
Description all as serial ietm No- 1.12 here-in-before but for 80mm bore pipe.
Run lead joint, suitable for cast iron pipes and fittings of 200mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
Run lead joint, suitable for cast iron pipes and fittings of 150mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
Run lead joint, suitable for cast iron pipes and fittings of 100mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
Run lead joint, suitable for cast iron pipes and fittings of 80mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
Run lead joint, suitable for cast iron pipes and fittings of 200mm bore including jointing materials except run lead, but inluding spun and spun yarn, complete all as specified and as directed by Engineer-In-Charge. Note: Old run lead shall be used as retrieved from dismantling of joints of pipe.
Run lead joint, suitable for cast iron pipes and fittings of 150mm bore including jointing materials except run lead, but inluding spun and spun yarn, complete all as specified and as directed by Engineer-In-Charge. Note: Old run lead shall be used as retrieved from dismantling of joints of pipe.
Run lead joint, suitable for cast iron pipes and fittings of 100mm bore including jointing materials except run lead, but inluding spun and spun yarn, complete all as specified and as directed by Engineer-In-Charge. Note: Old run lead shall be used as retrieved from dismantling of joints of pipe.
Run lead joint, suitable for cast iron pipes and fittings of 80mm bore including jointing materials except run lead, but inluding spun and spun yarn, complete all as specified and as directed by Engineer-In-Charge. Note: Old run lead shall be used as retrieved from dismantling of joints of pipe.
Gun metal spindle for sluice valve os existing specifications and make, with collor neck nuts, suitable for 200mm bore pipe, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of necessary tools, plants, welding/ grinding machine, packing materials as reuired at site shall be deemed included in quoted rate.
Description all as serial ietm No- 1.24 here-in-before but for 150mm bore pipe.
Description all as serial ietm No- 1.24 here-in-before but for 100mm bore pipe.
Description all as serial ietm No- 1.24 here-in-before but for 80mm bore pipe.
Cast iron fititngs bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, size upto 200mm bore, complete all as specified and directed by Engineer-In-Charge.
Replacement old un-serviceable Sluice Valve with new Sluice Valve, cast iron, Class PN 1.6, size 200mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified and as directed by Engineer-In-Charge.
Description all as serial ietm No- 1.29 here-in-before but for 150mm bore pipe.
Description all as serial ietm No- 1.29 here-in-before but for 100mm bore pipe.
Description all as serial ietm No- 1.29 here-in-before but for 80mm bore pipe.
Taking up or down galvanised steel tubing of 15mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Taking up or down galvanised steel tubing of 20mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Taking up or down galvanised steel tubing of 25mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Taking up or down galvanised steel tubing of 40mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Taking up or down galvanised steel tubing of 50mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Taking up or down galvanised steel tubing of 80mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Taking up or down galvanised steel tubing of 100mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 15mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 20mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 25mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 40mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 50mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 80mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge.
Tubes, 'medium grade' galvanised, 100mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
Attending complaints for repairing of broken pipes/ leakages, line bursting or cracks in water lines mains of 100mm bore including sunday and all holidays, by removal of pipe pieces of varying lengths through gas/ manual cutting and providing new pipe length of existing specifications, collar/ flanges as required at site, making leak proof by flanged/ lead joints including testing after completion of job, complete all as specified and as directed by Engineer-In-Charge.
Description of item all as serial item No- 1.52 here-in-before but for 150mm bore pipe.
Description of item all as serial item No- 1.52 here-in-before but for 200mm bore pipe.
Description of item all as serial item No- 1.52 here-in-before but for 250mm bore pipe.
Repairs of valve pit of size 900x900x900mm (internal dimensions) including brick masonry, rendering in 15mm thick cement mortar 1:4 on internal and external surfaces and white wahsing with two coats of lime wash including painting with two coats of black colour synthetic enamel paint to mild steel surfaces of angle iron framed work mild steel sheet with mild steel hinges, handles and suitable locking arrangements, fastening arrangements, nuts, bolts and washers, complete all as specified and as directed by Engineer-In-Charge.
Repairs of valve pit of size 1200x1200x1200mm (internal dimensions) including brick masonry, rendering in 15mm thick cement mortar 1:4 on internal and external surfaces and white wahsing with two coats of lime wash including painting with two coats of black colour synthetic enamel paint to mild steel surfaces of angle iron framed work mild steel sheet with mild steel hinges, handles and suitable locking arrangements, fastening arrangements, nuts, bolts and washers, complete all as specified and as directed by Engineer-In-Charge.
Construction of brick masonry valve pit of size 900x900x900mm (internal dimensions of chamber) including plain cement concrete, M-7.5 (1:4:8), type-D2 (using 40mm graded crushed stone aggregates) 100mm thick, as in sub base and PCC M-15 (1:2:4), type-B2 (using 40mm graded crushed stone aggregates) 100mm thick, as in flooring, brick work masonry, 23cm thick in cement mortar 1:4, rendering 15mm thick in cement mortar 1:4 on internal and external surfaces with two coat of lime wash, mild steel framed work as in valve pit covers with angle iron frame 50x50x6mm and including mild steel sheet cover 3.15mm thick complete, drilling/ welding for fixing of steel sheeting with mild steel hinges, handles and suitable locking arrangements, fastening arrangements for fixing, nuts, bolts and washers including painting with two coats of synthetic enamel paint over a coat of red oxide primer, including excavation in any type of soil, returning filling in external areas and removal the surplus soil to a distance of not exceeding 50mtrs, complete all as specified and as directed by Engineer-In-Charge.
Description of item all as serial item No- 1.58 here-in-before but for 600x600x600mm internal size valve pit.
Taking down existing unserviceable/ rusted structural steel in cross arms and replacement with new mild steel in cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one coat of red oxide primer, one under coat and one finishing coat of aluminium paint, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable Non Return Sluice Valve with new Non Return Sluice Valve, Class PN 1.6, size 200mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable Non Return Sluice Valve with new Non Return Sluice Valve, Class PN 1.6, size 150mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable Non Return Sluice Valve with new Non Return Sluice Valve, Class PN 1.6, size 100mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge.
Replacement old un-serviceable mild steel pipe with new mild steel ERW pipe, medium grade, 100mm bore, wall thickness not less than 5.40mm, and including flanged ends type, ISI marked, conforming to IS: 1239 (Part-I), laid in trenches/ bore well column pipe including jointing materials, complete all as specified and as directed.
Replacement old un-serviceable mild steel pipe with new mild steel ERW pipe, medium grade, 150mm bore, wall thickness not less than 5.40mm, and including flanged ends type, ISI marked, conforming to IS: 1239 (Part-I), laid in trenches/ bore well column pipe including jointing materials, complete all as specified and as directed.
Laser distance meter for measurement of 0.050mtrs to 200mtrs with accuracy +1.0mm, outdoor and indoor type (even in bright sun shine) including digital point/ view finder with 4x zoom, complete all as specified and as directed. Make: Leica cat part No- Disto or equivalent in Bosch/ Dewalt/ Tacklife.
Replacement of old damaged/ unserviceable submersible copper cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 35.0 Sqmm, 3-core, conforming to relevant IS specifications (IS: 694/1990), including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed. Make: Polygon/ Havells/ National/ Finolex.
Drilling, cutting and tapping CI/ DI/ GI water mains (in position) the existing pipe of 80 to 100mm for branch connections including inserting tee of suitable sizes with all fittings complete all as specified and as directed by Engineer-In-Charge.
Drilling, cutting and tapping CI/ DI/ GI water mains (in position) the existing pipe of 150 to 200mm for branch connections including inserting tee of suitable sizes with all fittings complete all as specified and as directed by Engineer-In-Charge.
Horizontal boring or drilling under the surfaces of road/ path etc, complete all as specified and directed by Engineer-In-Charge.
Preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth of water supply mains including valves and valve pit covers including and applying two coat of black bituminous paint, complete all as specified and as directed by Engineer-In-Charge.
Amount of Schedule of credit of for Rs 1,25,780.00 shall be deducted from quoted amount.
harish kumar and co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .