Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Rejected-Technical | Rejected-Technical Not Meeting the NIT Eligibility criteria on similar works (NIT Part C 3) |
| 3 | Rejected-Technical | Rejected-Technical Not Meeting the NIT Eligibility criteria on similar works (NIT Part C 3) |
Tender Value
₹56.5 L
EMD Value
₹1.1 L
Closing Date
12 Sept 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Head PRPD
OIC NF PRPD BARC Ph No 044 27480500 Extn 47660 47896 or 044 27480270
Building Electrification and Lighting works at Shake Table Facility PRP Site Kalpakkam
2023_BARC_769273_1
BARC/PRPD/NF-STF/K-2893/2023
Open Tender
Electrical Works
Item Rate
120 days
kalpakkam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹1.1 L
17 Oct 2023
30 Aug 2023
15 Sept 2023
30 Aug 2023
12 Sept 2023
31 Aug 2023
30 Aug 2023 - 11 Sept 2023
Amount
Supply, Installation, Testing and Commissioning of Power Distribution Board (PDB/LDB) of following configuration of 415V, TPN, Pre-wired with FRLS PVC/ HFFR copper wires, IP-54, Double Door MCB Distribution Board fabricated out of 2mm thick Hot dipped, Pre-Galvanized, G.I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with 100A fully insulated Cu-busbar, shrouded neutral bars, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications. (Refer Sec V) Power DB with lncomer of 4P/63A, lsc= 10kA, Type C-Curve, TPN MCB; with 2-Pole, 40A, lsc=10kA, IΔn=30mA RCBO for each phase and 24 nos. of 25A/20A/16A/10A, Isc=6kA, Type C, SPN Ougoing MCBs feeder as per SLD (PDB-1, 3 & 5) and technical specification. Approved Make: Legrand/Havells or Equivalent Make
Supply, Installation, Testing and Commissioning of Power Distribution Board (PDB/LDB) of following configuration of 415V, TPN, Pre-wired with FRLS PVC/ HFFR copper wires, IP-54, Double Door MCB Distribution Board fabricated out of 2mm thick Hot dipped, Pre-Galvanized, G.I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with 100A fully insulated Cu-busbar, shrouded neutral bars, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications. (Refer Sec V) .Power DB with lncomer of 4-Pole 63A, lsc= 10kA,IΔn=100mA, Type C, TPN RCBO and 4Pole 40A-1No/4Pole 32A-01No/4Pole 10A-01No/3Pole 10A-01No with Isc=10kA, Type C-Curve, Ougoing MCBs feeder as per SLD (PDB-2 & 4) and technical specification. Approved Make: Legrand/Havells or Equivalent Make
Supply, Installation, Testing and Commissioning of Lighting Distribution Board (LDB) of following configuration of 415V, TPN, Pre-wired with FRLS PVC/ HFFR copper wires, IP-54, Double Door MCB Distribution Board fabricated out of 2mm thick Hot dipped, Pre-Galvanized, G.I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with 100A fully insulated Cu-busbar, shrouded neutral bars, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications. (Refer Sec V). . Lighting DB with lncomer of 4P/40A, lsc= 10kA, Type C, TPN MCB and with 2-Pole 32A, lsc=10kA, IΔn=30mA, Type C-Curve RCCB for each phase, 18 Nos (6/Phase) of 6A, Isc=6kA, Type C, SPN Ougoing MCBs as per SLD (LDB-1 & 2) and technical specification. Approved Make: Legrand/Havells or Equivalent
Supply and Installation of 105mm x 50mm U-PVC adaptable trunking box with flexible covers suitable for wall mounting including all the required installation accessories like clip on partition, end cap, partition junction for capacity change, cable tie base, wall crossing, Coupling, External & Internal Bends, Elbows etc for fixing of power switches, sockets, plug points, telephone/ethernet port and also for routing of Power, Lighting and Telephone wires in various labs of STF as per the detailed specification.
Supply and Installation of 30mm x 20mm U-PVC trunking box (casing & capping) suitable for wall mounting with all accessories for routing of Power, Lighting and Telephone wires in various labs of STF as per the detailed specification.
Supply and Installation of 25mm x 12mm U-PVC trunking box (casing & capping) suitable for wall mounting with all accessories for routing of Power, Lighting and Telephone wires in various labs of STF as per the detailed specification.
Supply and Installation of 1" Ø & 3mm thk U-PVC Pipe for electrical wiring in STF as per the detailed specification.
Supply and Installation of 1" Ø/3mm thk U-PVC Pipe-Bend for electrical wiring in STF as per the detailed specification.
Supply and Installation of 2-Way/4-Way U-PVC junction box suitable for 1" Ø Pipe for electrical wiring in STF as per the detailed specification.
Supply and Installation of 2 Module Frame with Module Plate and 2 No of RJ-11 telephone port with shutter suitable for mounting on 105mm x 50mm U-PVC trunking box t as per specifications. (Refer Sec V)
Supply and Installation of 2 Module Frame with module plate, 1 no of RJ-45 Cat-6/ethernet port (occupying 2 module space) suitable for mounting on 105mm x 50mm U-PVC trunking box as per specifications. (Refer Sec V)
Supply and Installation of 2 Module Frame with module plate, 2 nos of 1P/6A switches suitable for mounting on 105mm x 50mm U-PVC trunking boxas per specifications. (Refer Sec V)
Supply and Installation of 5 Module Frame with pre-wired 02 nos of flush Type 16A/6A, Single-Phase 5-pin Socket with shutter controlled with single 16A switch with all accessories suitable for mounting on 105mm x 50mm U-PVC trunking box as per specifications. (Refer Sec V):
Supply and Installation of 6 Module, Polycarbonate Switch box (should not be knock out type) suitable for surface/wall mounting with 6 Modules plate and 6Nos. 1P(6A) Switch with accessories (All for lighting).
Supply and Installation of 6 Module, Polycarbonate Switch box (should not be knock out type) suitable for surface/wall mounting with 6 Modules plate and pre-wired 1No-1P/ 6A, 1No-1P/16A Switches, with 01No-16A 5-pin SPN socket and 01 No-6A SPN socket respectively with accessories
Supply and Installation of 4 Module, Polycarbonate Switch box (should not be knock out type) suitable for surface/wall mounting with 4 Modules plate and 4Nos. 1P(6A) Switch with accessories (All for bathroom-L&G, 1 Switch for lighting, 1-Switch for Exhaust Fan))
Supply and Installation of 2 Module, Polycarbonate Switch box(should not be knock out type) suitable for surface/wall mounting with 2 Modules plate 2Nos. 1P 6A Switch with accessories
Supply and Installation of 2 Module, Polycarbonate Switch box (should not be knock out type) suitable for surface/wall mounting (at 6-8 feet height) with 2 Modules plate and 1No-SPN 6A Socket with accessories (For plugging in wall mounting fan)
Supply and Installation of 1 Module, Polycarbonate Switch box (should not be knock out type) suitable for surface/wall mounting with 1 Module plate and 1No-1P/6A Switch with all accessories (For plugging in air circulators)
Supply and Installation of 1 Module, Polycarbonate Switch box (should not be knock out type) suitable for surface/wall mounting with 1 Module plate and 1No of RJ-11 telephone port with shutter and with all accessories
Supply and Installation of 1 no. of 20A Single phase Industrial Socket with lsc=10kA. Type C-Curve, Industrial type MCB (for AC) with pre- Galvanised powder coated Gl sheet steel Face Plate, Industrial Plug Top and suitable DIN rail and mounting arrangementsas as per technical specification.
Supply and Installation of pre-wired 01 no. of 10A and 01 no of 20A Single phase Industrial Socket with lsc=10kA. Type C-Curve, Industrial type MCB for each socket (For Other Temporary Ind. Load) with pre-galvanised powder coated Gl sheet steel Face Plate, Industrial Plug Top and suitable DIN rail and mounting arrangements as per technical specification.
Supply and Installation of 3-Phase, 63A, 5-Pin (3-Phase, Neutral, Earth) welding socket with plug top and isolator including fuse as per detailed specification (Refer Sec V, Clause No.)
Supply of 1.1 kV grade XLPE insulated, 3.5C x 95 SQMM Copper multistrand with cores laid up with outer sheath FRLS PVC (ST-2 type), round/flat wire armoured power cable based on availability, as per IS 7098 (Part - 1) 1988.
Supply of 1.1 kV grade XLPE insulated, 4C x 25 SQMM Copper multistrand with cores laid up with outer sheath FRLS PVC (ST-2 type), round/flat wire armoured power cable based on availability, as per IS 7098 (Part - 1) 1988.
Supply of 1.1 kV grade XLPE insulated, 4C x 10 SQMM Copper multistrand with cores laid up with outer sheath FRLS PVC (ST-2 type), round/flat wire armoured power cable based on availability, as per IS 7098 (Part - 1) 1988.
Supply of 1.1 kV grade XLPE insulated, 3C x 2.5 SQMM Copper multistrand with cores laid up with outer sheath FRLS PVC (ST-2 type), round/flat wire armoured power cable based on availability, as per IS 7098 (Part - 1) 1988.
Laying of 1.1 kV grade XLPE insulated, 3.5C x 400 SQMM Aluminium power cable in cable trench, as per specifications.
Laying of 1.1kV grade XLPE insulated, 4C x 95 SQMM Copper Power Cables partly in trench, cable tray, brick wall as per specifications.
Laying of 1.1kV grade XLPE insulated, 4C x 25 SQMM Copper Power Cables partly in trench, cable tray, brick wall as per specifications.
Laying of 1.1kV grade XLPE insulated, 4C x 10 SQMM Copper Power Cables partly in trench, cable tray, brick wall as per specifications.
Laying of 1.1kV grade XLPE insulated, 3C x 2.5 SQMM Copper Power Cables partly in trench, cable tray, brick wall as per specifications.
Supply and End Termination of Al-lugs suitable for cable of size 3.5C x 400 SQMM, multistranded Al-conductor; round wire armoured, XLPE insulated power cables as per instructions of Engineer In Charge (Note - Unit "Set" means 4 nos. of lug at one end of cable.)
Supply and End Termination of Cu-lugs suitable for cable of size 3.5C x 95SQMM , multistranded Copper-conductor, round wire- armoured, XLPE insulated power Cables as per instructions of Engineer In Charge . (Note - Unit "Set" means 4 nos. of lug at one end of cable.)
Supply and End Termination of Cu-lugs suitable for cable of size 4C x 25 SQMM, multistranded Copper-conductor, round wire-armoured, XLPE insulated power Cables as per instructions of Engineer In Charge . (Note - Unit "Set" means 4 nos. of lug at one end of cable.).
Supply and End Termination of Cu-lugs suitable for cable of size 4Cx10SQMM, multistranded Copper-conductor, round wire-armoured, XLPE insulated power Cables as per directions of Engineer In Charge. (Note - Unit "Set" means 4 nos. of lug at one end of cable.).
Supply and End Termination of Cu-lugs suitable for cable of size 3C x 2.5SQMM, multistranded Copper-conductor, round wire, armoured, XLPE insulated power Cables as per directions of Engineer In Charge. (Note - Unit "Set" means 4 nos. of lug at one end of cable.): 3C x 2.5 Cu-Cable
Supply and lnstalation of Brass Double Compression type Cable gland suitable for Muttistrand, round/flat wire armoured XLPE insulated cables of size.: 3.5C x 400 SQMM Al-Cable
Supply and lnstalation of Brass Double Compression type Cable gland suitable for Muttistrand, round/flat wire armoured XLPE insulated cables of size.: 3.5C x 95 SQMM Cu-Cable
Supply and lnstalation of Brass Double Compression type Cable gland suitable for Muttistrand, round/flat wire armoured XLPE insulated cables of size.: 4C x 25 SQMM Cu-Cable
Supply and lnstalation of Brass Double Compression type Cable gland suitable for Muttistrand, round/flat wire armoured XLPE insulated cables of size.: 4C x 10 SQMM Cu-Cable
Supply of Single Core HFFR/ FRLS wires (Copper) in colours of Red/Yellow/Blue, Black & Green for Phase, Neutral & Earth respectively as applicable and of size 6.0 Sq. mm in 1.1kV voltage grade as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 / 1984 as per technical specification.
Supply of Single Core HFFR/ FRLS wires (Copper) in colours of Red/Yellow/Blue, Black & Green for Phase, Neutral & Earth respectively as applicable and of size 4.0 Sq. mm in 1.1kV voltage grade as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 / 1984 as per technical specification.
Supply of Single Core HFFR/ FRLS wires (Copper) in colours of Red/Yellow/Blue, Black & Green for Phase, Neutral & Earth respectively as applicable and of size 2.5 Sq.mm in 1.1kV voltage grade as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 / 1984 as per technical specification.
Supply of Single Core HFFR/ FRLS wires (Copper) in colours of Red/Yellow/Blue, Black & Green for Phase, Neutral & Earth respectively as applicable and of size 1.5 Sq. mm in 1.1kV voltage grade as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 / 1984 as per technical specification.
lnstallation/drawing through concealed/surface conduit (PVC Trunking or Casing/Caping) and wiring with termination at both ends of Single Core HFFR FRLS PVC wires (Copper) of size 6.0 Sq. mm in votlage grade 1.1kV as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 /1984 as per technical specification.
lnstallation/drawing through concealed/surface conduit (PVC Trunking or Casing/Caping) and wiring with termination at both ends of Single Core HFFR FRLS PVC wires (Copper) of size 4.0 Sq. mm in votlage grade 1.1kV as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 /1984 as per technical specification.
lnstallation/drawing through concealed/surface conduit (PVC Trunking or Casing/Caping) and wiring with termination at both ends of Single Core HFFR FRLS PVC wires (Copper) of size 2.5 Sq. mm in votlage grade 1.1kV as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 /1984 as per technical specification.
lnstallation/drawing through concealed/surface conduit (PVC Trunking or Casing/Caping) and wiring with termination at both ends of Single Core HFFR FRLS PVC wires (Copper) of size 1.5 Sq. mm in votlage grade 1.1kV as per the IS: 3961 (Part V) - 1968, Conductor class 2 of IS: 8130 /1984 as per technical specification.
Supply and laying of 14 SWG tinned solid copper conductor throughout along the conduit including fixing with ties, brazing with suitable Lugs etc as required.
Supply and Installation of 160A TPN Isolator (SDFU) over the metal frame structure with suitable Cubicle fabricated out of 2mm thick Hot dipped, Pre-Galvanized, G.I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc (for feeding 2T Electrodynamic Shaker in STF Building) as per detailed specification.
Supply and Installation of 63A TPN Isolator (SDFU) over the metal frame structure, with suitable Cubicle fabricated out of 2mm thick Hot dipped, Pre-Galvanized, G.I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc (for feeding 12T/3T EOT Crane in STF Building) as per detailed specification.
Design, manufacturing, testing, packing, safe delivery, site installation & testing of Indoor type, trench mounted, compartmentalized, Power Distribution Panel with 630A TPN SDFU incomer with provision of bottom entry for input and top entry for outgoing feeder circuits of current rating varying from 40A to 400A [Ougoing SDFUs: 400A-2Nos., 250A-2Nos, 160A-2Nos, 90A-2Nos, 63A-2Nos, 40A-2Nos] suitable for operation on 3 Phase, 4Wire, 50Hz, 415Volts sytem with 1000A/50kA/1s, TPN Cu-Busbar fed supply system complete with all accessories and mandatory spares as per approved SLD and detailed technical specifications, all complying with latest IS/IEC 61439(Part-1, 2) & IS/IEC 60947 (Part-2, 3).
Supply and Installation of MS Hotdip galvanizing Perforated tray of size 500mmx50mmx2.5mm (thk.)
Supply and Installation of MS Hotdip galvanizing Perforated tray of size 400mmx50mmx2.5mm (thk.)
Supply and Installation of MS Hotdip galvanizing Perforated tray of size 250mmx50mmx2.5mm (thk.)
Supply and Installation of Circular Type 150W LED High Bay Lights with suitable fitting to be fixed in Truss in ceiling of STF building. (Catalogue No- PHILIPS / BY415P LED190S CW PSU GR FG NB XTFCL V1 or Equivalent)
S,I of Square Type 35W/2x18W LED Lights of size 600mmx600mm with suitable fitting for fixing & embedding in the false ceiling of Main Entrance, VSA Room, Electrical Room, Electrodynamic Shaker Control Room and Hydraulic Shake Table Control Room. (CatalogueNo: Order product Name: PHILIPS/ RC380B LED42S-4000 G6 L60W60 PSU OD or Equivalent LED)
S, I of Circular Type 35W LED Lights with suitable fitting and reflector, to be hanged with the support channel of metal sheet roof of substation room of size16m(L)x8m(B)x5m(H) and Canopy ceiling in shutter area at maximum 6m height.(The cost of erecting necessary scafolding for installation of light fittings shall be included) [Catalogue no-PHILIPS / BY202P LED43S CW PSU PC or Equivalent]
Supply, transportation, installation, testing and commissioning of the following type of surface mounted luminaires: Twin 2x36W wall mounted LED tube light with fittings on the walls of Substation, HPP room and main entrance of size 16m(L)x8m(B)x5m(H).
Supply and Installation of 1x36W LED tube light with fittings to be hanged on ceiling area of bathroom as per specification.
Supply of single phase, 240V, 450mm Sweep Pedestal Fans suitable for floor mounting with regulator as per the specification.
S,I of Single Phase, 230V, 50Hz, 300mm Heavy Duty Exhaust Fan with Aluminium Grill & Louvers and accessories for washroom.
Supply, installation, testing and commissioning of 600 mm Dia Industrial, Wall Mounting Fans with three metal blades including saftey guard and with rotatable featureas per the detailed specification.
Supply and lnstallation of 3-Phase 415V, 10A/6kA SC rating MPCB of reputed make (For powering already installed exhasuast fan in substation)
Supply, Fabrication and Installation of Standard steel sections as per IS 2062 Grade 80 for cable tray supports including Gl rod for cable tray support, chequered plates for trench covers, base frames for panels, anchor tasters, wall frames and brackets for supporting equipment. Fabrication shall include drilling, welding, wire brush cleaning, supply of all consumables like gas, welding rods. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied. [Note: Installation of angle supports and brackets for cable tray installation shall involve height jobs at 5-8 meters]
Supply of single phase, 240V, 3 Pin plugtop fed submersible pump with 15 Meter head and of 5m3/hr flow.
Providing and fixing of false ceiling with lay in plain metal ceiling system of Armstrong or approved equivalent make using 600mm x 600mm lay in tiles of pre-coated galvanised steel in 0.5mm thickness of approved colour, laid over grid system of make Armstrong suspension system or other approved system with 15mm wide T-section flanges having rotary stitching on the main runner suspended from the ceiling at required intervals including providing suitable opening for mounting of lighting fixtures & fittings, loud speakers, fire alarm system component and lighting system, also provision for trap doors etc., all complete as per specification and as directed by engineer-in-charge. Note: - (i) Main runner shall be spaced at 1200mm centre securely fixing to the structural support using approved suspension system at maximum spacing of 1200mm and not more than 150mm from the spliced joint, the first and last suspension shall not be greater than 600mm from adjacent wall. (ii) 1200mm long cross tees to be interlocked between main at 600mm centre to from 1200x600mm module and 600x600mm module to be formed by fitting 60mm long cross tees centrally between the 1200mm cross tees in birds mouth notches. Perimeter trim using wall angles of size 300x19x19mm, secured to walls at 450mm maximum centres. (iii) The suspension system accessories of make Armstrong or other approved make consisting of M6 Anchor fasteners with Vertical hangers made of Galvanized steel of size 26x26x1.2mm with a G.I coating of 80gsm, a pre straightened hanger wire of Adjustable hook clips of 0.8mm thick and galvanized spring steel for 2.68mm, the adjustable clip shall also consist of 3.5mm aquiline wire to be used with the main runner. (iv) The work shall be executed with skilled manpower as per manufactures specification.
S, I of Earth Pit Chamber made of RCC Hume Pipe of size 610mm (Dia.) x 410mm (Height) with RCC cover of Ø610mm x 65mm (thick) on 800mm Square & 150mm thick foundation (1:2:4 Pre Cast RCC) Base with 450 mm Dia. hole in the center with suitable shuttering including painting with yellow emulsion paint and marking of earth resistance value in black as per instruction of EIC. and tender technical specification.
Supply of Wet & Dry Multipurpose Vacuum Cleaner with auto Clean feature, Powerful Suction & Blower, HEPA Filter with minimum 1 Year of warranty and all accesories.
Power drill machine of motor rating 1150W/140-280RPM suitable for drilling in metals as well as RCC as per technical specifications and inclusive of all accessories. Make: Dewalt (Model No-D25600K 45mm SDS) or Equivalent
Supply of single phase operated Hot Air Gun with temperature range of 50º - 630º Celcius and settable three step airflow rate of 150 / 300 / 500 L/min as per technical specifications (Refer Sec V) and inclusive of all accessories. Make: BOSCH (Model No- GHG 600 DCE, Part No-0 601 94C 704) or Equivalent
Supply of Single Phase Operated Motorized screw driver as per technical specifications (Refer Sec V, Clause No.) and inclusive of all accessories. Make: Dewalt (Model No- DWW 269 VSR Torque adjustable screw driver or Equivalent
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .