Construction of office building for AE/West/Melur section in the existing 33/11 KV Melavalavu SS campus by providing Galvalume colour sheets for side walls, roofings, concrete flooring and other allied works

Amount

Extension/Improvement works to the existing Melavalavu 33/11KV SS control room building

Clearing light jungles around the Control room building and removing the jungles away from the site including labour charges, tools, lead, lift,etc.,complete..

Dismantling the existing wall for providing entrance door to accommdate AE/West/Melur in the store room of existing Melavalavu 33/11KV SS control building

Chipping of concrete and roughening the existing flooring surface to accommdate AE/West/Melur in the store room of existing Melavalavu 33/11KV SS control building

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in sand,silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth etc. complete.

Supply and filling of M-sand for foundation including cost of all materials, labour for watering consolidation, ramming, lead, lift, labour, etc., complete.

Supplying and filling of Red gravel in the basement filling, stacking to the department gauge, labour for filling, watering and consolidation, including cost of all materials, lead, lifts, labour, etc, complete.

Flooring with strain free Nano polish virtified tiles(600mmx600mmx8mm) over cement mortor1:3, 20mm thickincluding pointing with white cement ,finishing the joint,flush pointing with tiles surface atAE/West/Melur in the room including cost of materials, labour charges, lead, lift etc., complete.

Providing PCC 1:3:6 mix using 40 mm HBGS Jelly for foundation including cost of materials, labour charges, lead, lift etc, complete.

Brick work in CM 1:5 mix using IInd class ground moulded chamber burnt bricks for new wall, new backside approach steps for new AE/West/Melur office including cost of materials, labour charges, lead, lift etc., complete.

Special plastering as in Damp proof course with cement mortar 1:3 20mm thick mixed with the best approved quality water proofing component confirming to the IS spec. by the departmental officer at 2% by the weight of cement used, finishing, curing etc., complete.

RCC 1:1.5:3 using 12-20mm (machine crushed) metal for plinth beam including cost of all materials, labour, lead, lift, centering, shuttering, curing, etc., complete. But excluding cost of steel reinforcement.

Fabricating, supplying and fixing in position of M.S.Gate including all materials such as frame of size ISA 40 x 40 x 6 mm, stiffened with MS angle 15x15x6 mm vertically, hinges & bolts, aldrops, handles, towerbolts, labour charges for fabricating and fixing in position, all lead, lift, etc., complete but excluding painting.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) including cost of all materials, labour, lead, lift, etc., complete.

Providing Vinyl Flooring 2mm thick including cost of materials, labour charges, lead, lift etc, complete.

Manufacturing and fixing in position of Electro Anodised 15 micron thick Aluminium partially glazed single leaf door using box sections for outer frame, inner frame, vertical and bottom sections, divider and top of door frame for other side style with glazing clips, rubber beadings, hinges, handle, hydraulic door closer etc., and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete (Single leaf door 1.05 x 2.10 m)

Plastering with CM 1:5 mix using 12mm thick for new walls, approach steps, flooring etc including cost of all materials, labour, lead, lift, etc, complete.

White washing two coats with White cement approved quality over a primary coat over newly plastered surfaces including cost of all materials, lead, lift, etc., complete.

Colour washing two coats with plastic emulsion paint over one coat of plastic emulsion paint for inside wall including necessary plaster of paries two coats cost of all materials, lead, lifts, labour etc., complete.

Painting with two coats of ready mixed synthetic enamel paint of approved quality and colour over new iron work over one coat of red oxide primer including cost of all materials, lead, lifts, labour etc., complete.

Providing Galvalume colour sheet of size 0.47mm to accomodate AE/West/Melur office and for collection centre including J.Bolts & hooks on roof, frames, cost of all materials, labour charges, lead, lift etc., complete but excluding cost of pipe support frames.

Supply of MS square section pipes to vertical and horizontal support for the fabrication of Galvalume colour sheet of size 0.47mm to accomodate AE/West/Melur office and for collection centre including cost of all materials, labour, lead, lifts, labour etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board (10mm thick) False Ceiling upto a ceiling height of 4.5m from Floor level including cost of materials, labour charges, lead, lift, etc, complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block by making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 100mm thick compacted bed of coarse sand, filling the joints with fine sand including cost of all materials, labour, lead, lift, etc., complete.

Wring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheatahed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113 mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection if 14n SWG TC wire for open PVC plug point. (SD 36)

Wring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheatahed copper conductor of 1100V grade in suitable PVC rigid pipeconcealed in wall and ceiling with PVC accessoriesin flush with wall with 150mmx100mmx113 mm TW switch box 3mm thick hylem sheet for 15A 3 pin non inter locking Wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point. (SD 40).

Supplying and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator 1 metre down rod with fan clamp with side plated and cross arm of size 450 mm (18") including cost of all materials, labour, lead, lift, etc., complete. (SD 106)

Supplying and fixing of single box type 4'40W fluorescent fitting complete copper choke and condensres with TW round blocks on wall or ceiling with fluorescent tube with PVC unsheathed copper leads from terminals to the fitting including cost of all materials, labour, lead, lift, etc., complete. (SD 88)

Wring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheatahed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT swith with continuous earth wire connection of 14 SWG TC wire for making good o the concealed portion with suitable colour for PVC concealed llllight point / fan point (for electronic regulator (SD 23)

Manufacturing and supplying of steel door using 40 x 40 x6mm for outer frame 25x25x6 mm for shutter frame with MS flat 25x6 mm 3 nos. and for panels with 18 SWG MS sheet with bolts, washeres, hinges 12 mm dia tower bolt of 200x38x2.40 mm at bottom and one no 250x16 mm aldrop etc complete as per standard drawing andspecnas well as per standard drawing and specn as well as per direction of Engineer at ste.

Supplying and fixing of Wash Hand Basin of size 550 mm x 400 mm with all accessories such as Cast Iron Brackets, 32 mm dia CP waste coupling, Rupper plug and Chain, 32 mm dia 'B' Class GI waste pipe, 15 mm dia GM Wheel Valve, 15 mm dia Nylon Connection, 15 mm dia Brass Nipples, 15mm CP Pillar Tap etc., including cost of all materials, labour lead, ligt, etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu