REPAIR TO PATH DRAIN HARDSTANDING AND ALLIED REPAIRS WORK AT HQ NC CP COLONY CAMP HRDC A MESS AND TA GP TA COY NCIB AND AOR OF AGE BRII UNDER GE SOUTH UDHAMPUR

Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc, and area n.exc 10 Sqm on plan and getting out in any type soil complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick all as specified and as directed.

Removing excavated soil to a distance n exc 50m and depositing where directed at a level not exc1.50m above the starting point complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm, wall thickness not less than 2.2mm complete all as specified and as directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc 6 M Mean radius built in type CM 1:4 complete all as specified and as directed.

All as per srl item No here in before but except brick only complete all as specified and as directed.

M&L for walling of random rubble masonary, Squre, recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

All as per srl item No 14 above but except stone masonry complete all as specified and as directed.

M & L for hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level all as specified and directed

M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement as in manholes, septic tank, filter bed out let drain, bdy walls, drains etc all as directed

M&L for raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and as directed.

M&L for extra over hammer dressed facings, with maximum depression on face from straight edge held against the dressed surface n. exc 20 mm; to block-in-course masonry complete all as specified and as directed.

M&L 1mm thick wall care putty on wall complete all as specified and as directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings, Bed blocks, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover, septic tank covers slabs, drain cover slabs etc including necessary form work and set in CM (1:4). (Note:- reinforcement will be measured and paid separately.)

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

M&L Cement concrete type D 2 (1:4:8) (using 40mm graded stone aggregate) as in foundation filling and mass concerete complete all as specified and as directed.

M&L for Plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in surface chanels and drains, manhole complete all as specified and as directed.

M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate ) as in benching, haunching , coping, edging of path and similar work incl necessary form work complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for chequered cement concrete (glossy finish) tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed..

M&L for heavy duty coloured (Dura stone) tiles n exc 0.36Sqm of 8-10mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for framed work such grill, griting as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding eith and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any descripton not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces .

M&L for mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and directed

M&L for PCC 1:2:4 Type B2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Precast cement concrete louvers and jallies 25mm thick set in cement mortar 1:4 type B0 (1:2:4 using 12.5mm graded aggregate etc sample as approved by GE incl takong out old precast jali complete all as specified and directed.

M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

M & L for mild steel round bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and as directed.

S&F of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and as directed.