Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC | L1 | Accepted-AOC Being the lowest and reasonable bidder | |
| 2 | L2₹43.3 L+₹2.3 L (5.71%)Rejected-AOC 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L2 | Rejected-AOC Being the other than lowest bidder | |
| 3 | L3₹44.4 L+₹3.4 L (8.34%)Rejected-AOC | L3 | Rejected-AOC Being the other than lowest bidder | |
| 4 | L4₹44.5 L+₹3.5 L (8.55%)Rejected-AOC | L4 | Rejected-AOC Being the other than lowest bidder | |
| 5 | L5₹45.4 L+₹4.5 L (10.9%)Rejected-AOC | L5 | Rejected-AOC Being the other than lowest bidder |
Tender Value
₹53.5 L
EMD Value
₹1.1 L
Closing Date
27 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Nagrota
HQ CWE Nagrota Co 56 APO
ADDITION ALTERATION TO BLDG NO TS 455 AT KORE JAGIR AT NAGROTA MIL STN UNDER GE NAGROTA
2023_MES_577006_1
CWE/NGT-31/2022-23
Open Tender
Civil Works
Item Rate
182 days
Nagrota
As per NIT and tender documents
8 documents required · 8 mandatory
₹1,000
Yes
GE Nagrota
₹1.1 L
Yes
21 Mar 2023
25 Jan 2023
1 Mar 2023
25 Jan 2023
27 Feb 2023
20 Feb 2023
25 Jan 2023 - 8 Feb 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n exc 4 sqm and removing from site.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified
Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.
Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided.
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc
S&F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.
S&F Factory made, 2nd class hard wood, plain framed, paneled shutters (without interlocking rail and with one panel only) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified .
S&F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples
S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty complete all as specified and directed.
S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.
S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.
S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia.
S& F Floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring, fixed in floor overall length of cover plate 140mm
S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F Curtain rod 25mm dia aluminum brass polished with ends bulbs & rings of required size including bracket complete all as directed.
M&L for brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius built in CM 1:6 using old size bricks complete all as specified
All as per item No 26 above but in half brick thick walls built in CM 1:4.
Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( wpc to be paid measured and seperately) even and smooth without using extra cement complete all as specified.
M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified.
Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces any description, not otherwise described over 10 cm width or girth including preparation of surfaces.
Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.
M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface .
M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Preparation of new plastered surfaces of ceiling and applying three coats of white washing, all as specified.
M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified.
M&L for Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
S&F in repairs Wash down water closet (Pedestal pattern) with ‘P” or “S” trap vitreous china coloured including all fittings i.e seat cover and pressure jet complete all as specified and directed.
Supply and fix 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified.
M & L for Granite (of any type) work (table rubbed and polished) 18-20mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for 20 mm thick screed bed under granite in CM ( 1:4) complete all as specified and directed
M&L for 25mm thick PCC (1:2:4) type B1, as sub base under screed bed or beddding layer of tiling complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tile to store and rubbish off the premises complete all as specified.
Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over screed bed or beddding layer of CM 1:4, 15 mm thick complete all as specified and directed.
Non-skid ceramic coloured tiles with area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over, over screed bed or beddding layer of CM 1:4, 15 mm thick complete all as specified.
Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm cement rendering in cement mortar 1:4 complete all as specified.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 75mm thick ) finished even and fair completeall as specified.
Providing number plate of size 450 x 300x20mm in CM 1:4 and writing building No of height 8 to 10cms with luminuous paint through grooves of size 12 x 12mm ( Base: Black, grooves : orange)
Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position including PVC float valve 20 mm bore and including dismantling of existing water storage tank complete.
S&F PTMT grating doom of 100mm dia complete all as specified.
S&F PTMT grating doom of 125mm dia with waste hole complete all as specified.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15mm bore.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 20mm bore.
S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.
S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.
S&F 15mm bore fancy type bib tap brass CP (Long body) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
S&F bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm dia.
S&F 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
S&F Cast copper alloy CP stop cock /angle valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified.
S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 15mm dia
S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia
S&F Soap dish PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 105gm).
S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm).
Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.
S&F PVC (SWR) Bends of any radius for PVC pipes of 75mm bore.
S&F PVC (SWR) Bends of any radius for PVC pipes of 110mm bore.
S&F PVC (SWR) Bends of any radius for PVC pipes of 75mm bore with oval access door.
S&F PVC (SWR) vent cowl 75mm bore
S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.
Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if observed on roof
Removing old brick tiles/ RCC Padding including Mud phuska and removing from site and clean the surface of roof, with cleaning with water and remove dust complete all as specified.
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with average thickness 50 mm laid in two layers of 25 mm thickness each with wire netting of 0.60 mm dia and size of mesh 12 mm x 12 mm laid between the two layers finished even and smoothes in roof padding all as specified and as directed Note:- The wire mesh shall be measured and paid separately under the respective item below.
Supply only 25 mm size, wire netting of galvanized iron chicken mesh, 0.71 mm dia complete all as specified and directed.
Preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust and applying roof treatment as below:-- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen conforming to IS 702 @ 1.2 Kg/sqm. (iii) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame (iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane MAKE-IWL/Pidilite
S&F GI T Grid system in ceiling 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm center to center. Suspending the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod and levelling spring clip at 1200 mm center to center cross tee, interlocked into the pre-cuts in the main tees at 600 mm center to center in direction perpendicular to the main tee to make a grid of 600 x 1200 mm. 600mm cross tees are interlocked in the pre cut slots in the 1200 mm tees at 1200 mm center to center in direction parallel to the main tee. Cross tees having length more than 600 mm are to be supported independently. 4.5 mm thick E board with square edge of size 595 x 595 mm be placed in the grid of 600mm x 600 mm. Size of grid to be specified by manufacturers.
S&F Vitreous china Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs
Excavation in post holes (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and ramming each of broken rubble mixed with earth around in layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface all as spd and directed.
M&L for cement concrete PCC 1:3:6 type C2 using 40mm graded crushed stone agg as in foundation/ sub base of posts all as specified and directed .
S&F Mild steel work in posts and struts in fencing including cutting tops to shape as directed ,drilling holes notching for wire etc, flat iron fillets for securing wire mesh/chain link fencing including all necessary welding, drilling, bolting or riveting etc and similar work and providing ms flat for welding of GI mesh to posts or struts as spd and directed
Mild steel in flats in available lengths to screw/bolting chain link to the angle iron complete all as specified.
Supply only 4mm dia galvnised steel wire of mesh size 75mm x 75mm made up into matteress or cages, lapped wired and laid in position all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, steel post by welding etc all as specified and directed etc. including provision of binding wire
M&L for PCC 1:4:8 type D2 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed
S&F MS round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire complete all as specified and directed
Spreading and levelling in layers n exc. 25 cm thick including well ramming including watering as required for footpath complete all as specified and directed
M&L for 100mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) floors/ sub floor / pavings complete all as specified and directed
M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 70mm thick as sub base for chequered tiles complete all as specified and directed
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportions and pigments over screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified and directed
On site LLDPE septic tank for 30 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed.
Soakage well with excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 m dia X 3.0m effective depth, complete all as specified and directed.
M&L for RCC NP2 200 mm diameter Pipes laid on 150 mm thick bed of PCC 1:4:8 with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame including all items and activities to execute and make sewer line functional.
M&L form work to sides of concrete foundations, footings, plinth beams, bases of columns for flat rough finished surfaces on concrete.
M&L form work to edges of concrete flats, roofs n.exc 20cm wide and sides of RCC slab for rough finished surfaces.
M&L form work to sides of columns, posts etc for rough finished flat surfaces of concrete.
M&L form work to floor beams and roof beams including supports, for rough finished surfaces of concrete.
M&L form work to soffits of suspended slabs supported on walls such as roof slabs n.exc 200mm thick for rough finished surfaces.
M&L RCC M-25 design mix (20mm graded stone aggregate) as in footings and plinth beams.
M&L RCC M-25 (using 20mm graded stone aggregate) as in slabs supported on walls.
M&L RCC M-25 (using 20mm graded crushed stone aggregate) as in Columns.
M&L RCC M-25 (using 20 mm graded stone aggregate) in floor beams and roof beams.
M&L RCC M-25 design mix (using 20 mm graded crushed stone aggregate) as in Chajjas.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.9mm dia.
All as per item No 106 above but 6mm to 8mm dia.
All as per item No 106 above but 5mm dia and over upto and including 10mm dia in stirrups.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.
S&F PVC connection 15 mm size with PTMT nuts 450 mm long.
S&F Stainless steel, Chromium plated towel rail 20mm dia 'D' type 60 cm long between flanges.
S & F Swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gm).
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 75mm thick ) finished even and fair without using extra cement all as specified.
S&F vitreous china wash hand basin colour flat back, size 550x400mm including waste pipe , chromium plated waste coupling 32mm dia , bracket etc complete.
M&L for 100mm thick cement concrete type C- 2, 1:3:6 (using 40mm graded aggregate) as in sub base complete all as specified.
M&L for 25mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in base complete all as specified.
Cutting into existing manhole for connecting new drains and making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified.
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit complete all as specified and as directed by Engineer-in-Charge
Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt as well as oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engineer-In-Charge.
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following :-
(a) One light point controlled by one switch 5 Amp.
(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp
(c) One socket out let 5Amp controlled by one switch on same board.
(d) One socket out let 5 Amp controlled by one switch on independent board.
All as per item No 126 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independent board.
All as per item No 126 here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20 amp 240V
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.
S & F Modular socket 5 pin, 5/6 Amps suitable for 2 Module complete all as specified.
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.
S & F Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified.
S & F Modular white cover plate including Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.
All as per Item No-133 above but 3 module complete all as specified.
All as per Item No-133 above but 2 module complete all as specified.
All as per Item No-133 above but 8 module complete all as specified.
All as per Item No-133 above but 12 module complete all as specified.
S & F Modular blanking plates 1 module complete all as specified.
Supply & fixing Ceiling fan 1200 mm sweep 5 star rated single phase AC 230/240V complete as per Model No Fusion of Havells and equivalent in Bajaj / CG including fan rod.
S&F Single pole & neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp 240V
Supply and fix in replacement, Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories 230V 50 Hz. Cat part no.112181 BLRB-DB 118 of Bajaj or equivalent in Havells / Crompton.
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated body complete all as specified and directed.
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including 7 Watt LED bulb complete all as specified and directed.
S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete.
S&F sheet metal enclosure distribution board SPN 4 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete
S&F MCB DP 63 Amps 10 KA 230 volts "C" series complete
S&F MCB single pole 6 to 32 Amps 10 KA 230 volts "C" series complete
S&F baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as per Cat No BCLSB 05 WH of Bajaj or techno commercial equivalent in make given in PS.
S&F decorative wall mounted luminaire with & including 9 Watt LED lamp complete as per Cat No of LHFHCHE1TL1W020 of Havells or equivalent in approved make.
Supply & fixing heavy duty Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers.
S&F white powder coated CRCA housing with LEDs 36W, 230 V, 50 Hz Surface mounting LED 2 feet x 2 feet luminaries, Sweamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size.
M&L LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz .
S&F Bollard light of 10 W capacity ,Sturdy IP 65 LED Bollard with excellent light out put through its PMMA windoe ensuring maximum illlumination aspect in surrounding transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size.
S&F building security light luminaries energy saving and environment friendly long life LED light of 25W with a minimum system lumen of 2500 Lm and system wattage not exceeding 25W with a nominal system Lumen efficiency 110 lumen/watt. The Ingress protection should be minimum IP 66 with an IK rating of 08. The Luminaries should have 4KV internal surge protection. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters, including GI bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and including two Nos 25x4 mm size flat mild steel clamp made to shape and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete, all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq mm 2 core nominal cross section in service connections
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs.
S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete.
M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6.0 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.
Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for foundation, electric poles stay foundation and under ground electric power cables and getting out complete all as specified.
Returning, filling in. including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified
Removing excavated surplus material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point.
Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat all as directed.
Sand (Dry clean ) as in cushioning to underground electric cable provided all as specified in Clause 19.75 of SSR Part-I 2009.
Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 95 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge
Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 35 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge
Feeder pillar box outdoor type "factory made" made out from 16 SWG MS sheet supported with legs of 45cm Long made of iron angle 25x25x4mm thick of size 75cmx60cmx45cm with 04 Nos aluminium bus bar of 400 Amps mounted on porcelain insulator drilled hole for cable connection including front and rear side opening with locking arrangement provn for incoming and outgoing cables with glands,with incommer MCCB 160 Amp 4 Pole including painting with two coat of smoke grey including painting with two coat of red oxide primer,completer all as specified and directed by Engineer-in-charge. Note-Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation,rendering 15 mm in CM 1:6 and two coats of cement base paint and rates shall be inclusive in the quoted rate.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.
Note:- Schedule of credit of Rs. 83,323.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
commercial traders
Karmnaya Construction
RAJINDRA ENGINEERS & CONTRACTORS
R.K. Works
Kalsi Engineers and contractors
Nitika electricals and engineers works
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .