Special Repairs to bathroom in bldg No P-213 (OTM accn Auto Regt) first floor of Bldg No P-1 (OTM accn Demo Coy) Special Repairs to Bldg Nos P-94/4 P-94/3 (Demo Coy SAW) P-96/9 10 (OSL of MDC) Special Repair to toilet at Bldg No P-32 (Princ

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) etc complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in ground floor and paving n.exc 15cm in thickness (below or above ground level) etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor, laid over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm on vertical surfaces such as skirting / Dado, over and including 10 mm thick backing coat in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of Kitchen / toilet / bathroom etc laid over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for glazed ceramic coloured tiles of size 350 X 250 X 7 mm thick on vertical surfaces such as skirting /dado over and including 10 mm thick backing coat of cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles double charged/ultra charge ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE as in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive as per the manufecturer's instructions and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 10 (here-in-before) but on skirting

M & L for 40 mm thick Cement concrete type B-1, (1:2:4) (20mm graded stone aggregate) finished concrete even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on any type of face of stone masonry / brick work / concrete surfaces in cement and sand mortar (1:6) on wall surface finished even and smooth without using extra cement with sagol finish all as sepecified and directed.

M&L for applying two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment and applying two coats of Oil Bound Distempar (OBD) on plastered surfaces of walls including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old decorated surafces of ceiling etc and applying one coat of white wash etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 10 mm thick on concrete surfaces in cement and sand mortar (1:4) on ceiling surface finished even and smooth without using extra cement with sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on any type of face of stone masonry / brick work / concrete surfaces in cement and sand mortar (1:4) on wall surface finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for applying two coats of cement paint on newly / old plastered surfaces including preparation etc complete all as specified and directed by Engineer-in-Charge

M&L for 3 coats of white wash on newly / old plastered surfaces including preparation on ceiling etc complete all as specified and directed by Engineer-in-Charge

M&L for 3 coats of white wash on newly plastered surfaces including preparation on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

M&L for Shahabad stone 20mm to 25mm thick flooring screed bed or bedding layer of mortar 15 mm thick for laying floor finishes to receive tiles and stone slab etc complete all as specified and directed by Engineer-in-Charge

S&F Mild steel TMT bars 6mm to 8mm dia in distribution, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including cutting & removal of old decayed reinforcement etc complete all as specified and directed by Engineer-in-Charge

Taking down steel windows / ventilators, of any description and size each etc complete all as specified and directed by Engineer-in-Charge

Supplied and welding standard projecting / box, butt hinges for steel windows as in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge NOTE: Wire cloth, glass & guard bars shall be measured and paid separately under relevant item of this BOQ

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed by Engineer-in-Charge NOTE: Wire cloth, glass and guard bars shall be measured and paid separately under relevant iten of this BOQ

S&F mild steel 10 mm square bar to steel windows/ventilators as in guard bar conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified and directed by Engineer-in-Charge

M&L for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M&L for glazing with 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames n exc 1.5 Sqm each with shutters (without taking off shutters from the frame) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each etc complete all as specified and directed by Engineer-in-Charge

M&L for refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each etc complete all as specified and directed by Engineer-in-Charge (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)

S&F 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engineer-in-Charge

All as per item No 39 (here-in-before) but fixed in repairs.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

S&F factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails frame shall be covered with heat moulded plain coloured PVC `C' channel having a PVC sheet strip of 20 mm width stuck and plain colour PVC sheets for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm long butt hinge, medium weight, Stainless steel etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm long MS butt hinge, medium weight, etc complete all as specified and directed by Engineer-in-Charge

S&F 125 mm long MS butt hinge, medium weight, cold rolled mild steel etc complete all as specified and directed by Engineer-in-Charge

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge

S&F 200 mm long mild steel barrel tower bolt, stove enamelled black, with bright bolt etc complete all as specified and directed by Engineer-in-Charge

S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm long mild steel pressed handles, oval type, stove enamelled black etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm long aluminium anodised handle, cast type etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint all as specified.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

supply and fix mild Steel 32 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China white, flat back type of size 550 X 400 mm pedastal type including pedastal, pillar tap, CP waste chain and plug and porcelain stopper, waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No 10098 of Hindware or equivalent to makes in make list in Appendix `C'

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware or equivalent to makes in make list in Appendix `C'

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as per Cat Part No 573 of Jaquar or equvalent in Marc / Cera etc complete all as specified and directed by Engineer-in-Charge

Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe etc complete all as specified and directed by Engineer-in-Charge

All as per item No 59 (here-in-before) but 20mm dia pipe.

S & F for CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors com 16 mm bore outer dia of pipe cetc complete all as specified and directed by Engineer-in-Charge

All as per item No 61 (here-in-before) but 20mm dia pipe

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge

All as per item No 63 (here-in-before) but fixing only.

All as per item No 63 (hre-in-before) but 20mm dia.

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

S&F in repair chromium plated grating 100mm dia etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A (Orintal series) of MARC or equivalent to makes in make list in Appendix `C'

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make:- (Cat part No MOR 1320(Orintal series) of MARC or equivalent to makes in make list in Appendix `C'

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent to makes in make list in Appendix `C'

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas etc complete all as specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs looking mirror of size 600 mm X450 mm etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No C 8606 Of Parryware or equivalent to makes in make list in Appendix `C'

PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China white, flat back type of size 550 X 400 mm pedastal type including pedastal, CP waste chain and plug and porcelain stopper, waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No 10098 of Hindware or equivalent to makes in make list in Appendix `C'

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified by Engineer-in-Charge

Supply and fix 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- (Cat part No MOR 1010(Orintal series) of MARC or equivalent to makes in make list in Appendix `C'

M&L machine cut cudappa stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed by Engineer-in-Charge

Material and labour 16mm to 18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 13 & n.exc 25 Sq.cm of 2nd class hard wood etc complete all as specified and directed by Engineer-in-Charge

S&F continous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) etc complete all as specified and directed by Engineer-in-Charge

S&F 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and directed by Engineer-in-Charge

S&F 125 mm long aluminium anodised handle, cast type etc complete all as specified and directed by Engineer-in-Charge

S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including S& f wooden wrought lipping fillet all around periferry of the board/shutters etc complete all as specified and directed by Engineer-in-Charge

M&L for plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6 Sqcm of second class hard wood etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs stainless steel kitchen sink 0.63mm thick laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed by Engineer-in-Charge

M&L for Machined pressed precast concrete interlocking paver block glossy finished with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over a stone dust cushion of 30mm thick etc complete all as specified and directed by Engineer-in-Charge

Dismantling of water tanks of capacity exc 500 ltrs but n.exc 1000 ltrs and removing from site etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed etc complete all as specified and directed by Engineer-in-Charge and as approved by GE.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe etc complete all as specified and directed by Engineer-in-Charge

Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories) etc complete all as specified and directed by Engineer-in-Charge

S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge

S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge

S&F 75 mm dia PVC (SWR) vent cowl etc complete all as specified and directed by Engineer-in-Charge

S&F 110 mm bore PVC (SWR) branch piece double (single Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge

S&F 110 mm dia PVC (SWR) bend any radius etc complete all as specified and directed by Engineer-in-Charge

S&F 75 mm dia PVC (SWR) bend with access door any radius etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

S&F in repair stainless steel plate rack 0.63mm thick sheet for kitchen ( Size 31"x 36' x 10') etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick cement plaster in CM (1:3) on RCC slab/floor top surface including WPC by weight of 3% of total cement content etc complete all as specified and directed by Engineer-in-Charge Note : WPC will be measured separately under relevant item of this BOQ

Supply only integral water proofing compound complete etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforced with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC (1:5:10) type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, including WC viterous china squatting pan 580x440mm with integral footrests/pedastal pan incl seat cover, white, area of WC exc 1.00 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge

Dismantling of 75mm or 100mm dia cast iron or reinforced cncrete drain pipes, jointed in cement mortar and taking out of trenhes if required etc complete all as specified and directed by Engineer-in-Charge

M & L for providing cast iron soil & waste and vent spun pipes of under mentioned dia, in any length with or without ears with cement joints fixed on walls etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair vitreous China bowl urinal flat back, size of 270X360X450 mm, white, with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement and sand mortar (1:2}, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement and sand mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge. Make :- Cat Part No C0501 Of Parryware or Cat Part No 60001 Of Hindware or equivalent to makes in make list in Appendix `C'

S&F Self-closing flush taps for urinal, cast copper alloy, chromium plated, screwed for iron pipe and fixed 15mm bore pipe etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair pressed steel frames (Size 125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, supplied and fixed etc complete all as specified and as directed by Engineer-in-Charge.

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 Sqcm & n.exc 6 Sqcm of 2nd class hard wood etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling of false ceiling boards (fibre, pulp, insulation, etc,) or any type ceiling board any thickness including cover fittets etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets partly in roof coverings etc complete all as specified and as directed by Engineer-in-Charge.

S&F of kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm with GI clip and level adjuster duly suspended by 4 mm dia GI wire fixed to roof at 1200 mm centre to centre as per manufacturere's instructions and etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix asbestos cement corrugated or semi currugated sheets, 6 mm thick in roofs, walls fixed with 'L' type or 'J' type or cranked hook bolts etc complete all as specified and as directed by Engineer-in-Charge.

S&F asbestos cement pain angular ridge 6 mm thick fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed by Engineer-in-Charge.

M&L for screed bed or bedding layer of mortar 10mm thick in cement and sand mortar (1:3) by using 100% course sand on roof/chajja mixed with & including M&L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment.

M&L for providing waterproofing treatment on roof / chajja / parapet etc. as per latest zonal specification, as per manufacturer's instructions and as specified after taking down / out as existing as site etc complete all as specified and as directed by Engineer-in-Charge.:- (a) M&L for cleaning the newly plastered surface with wire brushes and applying two coats of bituminous primer @ 0.25ltrs/sqm and allow to dry. (b) M&L for applying and laying torch APP polymer midified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less 3 kg / Sqm with white gravel/mineral finished by thermofusion process.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and n exc 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed by Engineer-in-Charge.

Excavation over area n. exc. 1.5m deep and getting out in soft/loose soil etc complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub-base etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 150mm thick hardcore of gauge n exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers , watered and rammed to a true surface etc complete all as specified and as directed by Engineer-in-Charge.

M&L precast cement concrete block masonry Type C1 (1:3:6) with solid blocks,exc 10 cm in width and setting in cement and sand mortar (1:6) etc complete all as specified and as directed by Engineer-in-Charge.

M & L 10 mm dia and over TMT bars cut to length bent to shape required including cranking ,bending , binding with MS wire not less than 0.9 mm dia (annealed) etc complete all as specified and as directed by Engineer-in-Charge.

M & L for RCC M-25 foundations, including rafts, footings, foundation beams; plinth beams etc. and mass concrete etc complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B1 as in coping including necessary formwork, weatherig, slightly rounded or chamfered angle and throating etc complete all as specified and as directed by Engineer-in-Charge.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of synthetic enamel paint over red oxijde primer on new steel surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and including PVC casing and capping ISI Marked with its accessories Flush mounting Plastic surface boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by one, one way switch, single pole

One fan point controlled by one, one way switch, single pole

One 3 pin 5 Amp socket out let on independent board.

One 3 pin 5 Amp socket out let on same board.

One bell point controlled by one bell push on independent board

All as per Item No 140 here-in-before but 2.5 Sqmm Copper conductor cable for phase, neutral and earth for one 3 pin, 15 Amps socket out let on independent board

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and including PVC casing and capping ISI Marked with its accessories with provn of CI/pressed steel terminal switch box 3mm thick and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc with and including 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by one, one way switch, single pole

One fan point controlled by one, one way switch, single pole

One 3 pin 5 Amp socket out let on independent board.

One 3 pin 5 Amp socket out let on same board.

One bell point controlled by one bell push on independent board

All as per Item No 147 here-in-before but 2.5 Sqmm Copper conductor cable for phase, neutral and earth for one 3 pin, 15 Amps socket out let on independent board

S&F Modular Switch, 6 A, 1 Way single, 1 Module. etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Switch, 16 A, 1 Way, 1 Module. etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6A - 2/3 pin combined 2 module Make- Crabtree etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6A/16A - 2/3 pin combined 2 module Make- Crabtree etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Fan Regulator Fan step regulator, 120W - 2 module Make- Crabtree etc complete all as specified and directed by Engineer-in-Charge.

S&F 6A one way SP bell push, 1 module, 5 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Switch Piano Flush type 230/250 Volt, 5 Amp single pole one way, etc complete all as specified and directed by Engineer-in-Charge

S&F bell push, switch flush type, 5 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell, AC, 230 volts single pole etc complete all as specified and directed by Engineer-in-Charge

S&F step type electronic fan Regulator flush type on the existing phenolic laminated sheet cover etc, as reqd single pole 240 volts grade 100 watts heavy duty ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination multi purpose 2 in 1, 6 pin 5 Amp, flush type etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination 5 in 1, 5 Amp / 15 Amp, flush type ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose surface bakelite 65mm x 50mm three etc complete all as specified and directed by Engineer-in-Charge

S&F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 8 way, (SPN DB's) 240 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F Isolators of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) Note :- Make of the isolator shall be the same as that of DB) for thre following etc complete all as specified and directed by Engineer-in-Charge:-

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified & directed by Engineer-in-Charge

Supply & fixing MCB , SP, AC, 240 volts of 32 to 63 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified & directed by Engineer-in-Charge.

Taking down existing tube light fitting & supply and fix decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy effiient ready to use pack LED tube light fitting 20 watt with LED light source 6500 K with uniform light outpit, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with complete with all accessories all as specified & directed. Make : HAVELLS E-LITE LED PRIDE PLUS NEO (CAT NO LHEXACP71N1W020) or its equivalent Cat part of make Philips / Wipro / Jaquar

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core seathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

M&L Earthing complete with galvanized earth plate electrode 600x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 using graded stone aggregate pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) using graded stone aggregate type B1 reinforced with 8 mm dia TMT bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe etc complete all as specified and directed by Engineer-in-Charge connected to earthing list point etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through in and including PVC casing and capping with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified & directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) Note: Two run of 4 sq.mm cable i.e for one run for phase, one run for neutal with one run of 4 sq.mm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge. Make -Havell's Cat Part: (ENDURAPEARLSL25W MP) ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in to makes in make list in Appendix `C'.

Supply and fix in replacement industrial type switch socket for Geyser with 20 Amps MCB etc complete all as specified and directed by Engineer-in-Charge

Supply and fix water heater storage type, electric, capacity 25 litre, BEE 5 star rated, including water supply connection etc complete all as specified and directed by Engineer-in-Charge

Supply and fix heavy duty exhaust fan , metalic body of 300 mm sweep 900 RPM single phase 230 volt 50 Hz electric driven including louvers and all fixing accessories etc complete all as specified and directed by Engineer-in-Charge Make/Model - Havell's Turbo Force SP or its equivalent to makes in make list in Appendix `C'

An amount of Rs 69,102.00 shall be deducted from BOQ on account of schedule of credit

M/s.Abhay Kulkarni and Associates

M/s. Sagar Traders

M/s AG PATHAN