COMPREHENSIVE MAINTENANCE AND MISC B/R WORKS AND INTERNAL ELECTRIFICATION AT ZONE D AREA UNDER GE (EAST) MATHURA

Amount

Taking up or down 15 mm bore steel tubing and connection including disconnection of fittings complete all as specified and as directed.

M&L for mild steel tubing 15mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.

M&L for Cutting chases pinning in , making good to facing where reqd and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, selfs lintels etc. and cutting chases for conceled water tubing for concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connection including disconnection of fittings complete all as specified and as directed.

M&L for mild steel tubing 20mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.

Demolition of Brick masonry built in cement mortar including all quoin, arches pillar etc complete all as specified and as directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick on other than face fair face of brick work or concete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions and surface finished even & fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only Liquid water proofing compound of approved make complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 finished even & fair without extra cement complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of old plaster surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for providing 3mm thick wall care putty on plastered surfaces of walls complete as specified and as directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of distemper oil emulsion paint, white or tinted complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls providing 1mm thick wall care putty to achieve smooth surface and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and as directed.

M&L for prepration of new plastered surface of walls and applying two coats of cement base paint, white or tinted over and including a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatement of old plastered surface of wall and applying one coat of weather proof acrylic exterior paint complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

All as per Serial item No 25.00 here-in-before but on vertical surfaces over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

All as per Serial item No 26.00 here-in-before but on vertical surfaces over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick on vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work black colour as specified (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms laid over and including 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 15 mm tick rendering in cement mortar 1:4 and jointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with necessary clamp complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and as directed.

S&F in repair PVC floor trap dia of outlet 75mm plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15mm dia bore iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repair stop valve/angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for 15mm bore iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repair stainless steel Hand jet health faucet 15 mm bore with 8mm dia & 1.2 mtr long flexible tube and wall hook with all connected fittings complete all as specified and as directed.

S&F stainless steel Grating doom 100 mm dia complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern dual operation water saving type of 10 litre capacity, white/coloured with inlet ball valve, float, handle fixing brackets including 32 mm bore PVC flush pipe etc complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed

S&F 12 mm thick wood plastic composites board (WPC) fixed to each other using solvent cement fixed with screw and solvent cement adhesive in cupboard, kitchen etc complete all as specified and as directed.

S&F18mm thick wood plastic composite board (WPC) one side laminated and other side balance white as on side cupboard/kitchen cabinet including shelves, partion of required size and for supporting the hold of shelfs/partion including providing PVC lipping of size18 x 1mm front visible edge of the shelf/partition etc complete all as specified and as directed

Dismantling old unserviceable wood plastic composite board (WPC) including all fittings of kitchen cabinet complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete including PVC low level flushing cistern 10 liter capacity white/coloured dual operation type with inlet, ball valve, float, handle and fixing brackets including 32mm dia PVC Flush pipe complete complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel lmm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug including bracket complete all as specified and as directed.

S&F in repairs wall mixer cast copper alloy chromium plated with connector including hand shower and head shower arrangement with connecting legs ,wall flanges and wall bracket screwed for 15mm dia bore iron pipe or union complete all as specified and as directed.

S&F in repairs wash hand basin mixer cast copper alloy chromium plated with 450mm braided connection pipe screwed down for iron pipe 15mm dia bore complete all as specified and as directed.

S&F in repair Ball valves PTMT, high pressure, with polythene float & flynut complete, screwed for 20mm dia bore iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs floor door stopper overall length of cover plate 150mm of brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed.

S&F in repair 15-20mm bore GI reducer complete all as specified and directed.

S&F in repair 25 mm bore GI Tee complete all as specified and directed.

S&F in repair 25 mm bore GI Union complete all as specified and directed.

S&F in repair 25 mm bore GI Elbow complete all as specified and directed.

S&F in repair 25 mm bore GI socket complete all as specified and directed.

S&F in repair 25 mm bore 125 mm long GI Nipple complete all as specified and directed.

S&F in repair 25 mmbore 100 mm long GI Nipple complete all as specified and directed.

S&F in repair 20 mm bore GI Union complete all as specified and directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and directed.

S&F in repair 20 mm bore 150mm long GI Nipple complete all as specified and directed.

S&F in repair 20 mm bore 100mm long GI Nipple complete all as specified and directed.

S&F in repair 20 mm bore GI socket complete all as specified and directed.

S&F in repair 15 mm bore GI Tee complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, white of size 465 x 355 x 265 mm, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.

S&F in repair stainless steel grade 304 Toilet paper holder with wall flange of size 180x90x70mm complete all as specified and as directed.

S&F in repair cast copper chromium plated towel Ring of 150mm dia fixed with and including Chromium plated brass screws to wooden/plastic cleats complete all as specified and as directed.

S&F in repair stainless steel towel Rack 600 mm long with lower Hangers complete all as specified and as directed.

S&F in repair stainless steel Towel Rail 600 mm long made out of 20mm dia stainless steel tube fixed with stainless screw to wooden/plastic gutties complete all as specified and as directed.

S&F in repairs monkey protection cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame, nut, bolt etc. complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe or union 15mm dia bore and fixed complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated swivel shower rose 125mm size with 450mm long SS arm complete all as specified and as directed.

Supply and fix in repair Rotational moulded, polythene water storage tank of 1000 liters capacity triple layer white colour (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fittings and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia bore complete all as specified and as directed.

All as per serial item No 79.00 here-in-before but PVC water storage tank 750 liter capacity complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia of pipe and fixed complete all as specified and as directed.

S&F in repair Waste fittings, cast copper alloy chromium plated for wash hand basin 32mm bore waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) including chequered tiles and paver blocks complete all as specified and as directed.

M&L for 100 mm thick cement concrete type-D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for Chequred Cement concrete coloured tiles with grey cement and pigments 20cm x 20cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down Shutters of any description n exc 1 sq.m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board fixed on aluminium frame work complete all as specified and as directed.

S&F in repairs aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Taking down old aluminium shutter exc 1.5 sqm n exc 4sqm each easing and adjusting bottom and top pivot, repair the locking arrangement & floor spring and refixing in the same opening complete all as specified and as directed.

S&F Aluminium handles of size 150 mm fabricated type, anodised complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.

S&F Butt hinges 100mm size extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps and junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws complete all as specified and as directed.

M&L for Anodised Aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodise coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with chromium plated brass/stainless steel screw @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.

S&F sheet glass 5.50 mm thick ordinary quality and glazing with aluminium beading exc 0.50 sqm in each pane complete all as specidfied and as directed.

M&L Anodised Aluminium window and ventilator shutters, powder coated (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

M&L aluminium anodised barrel tower bolt of 75mm long of extruded section and fixed complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F 6mm thick Asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook both botls complete all as specified and as directed.

M&L for Asbestos cement one piece plain angular ridge 6mm thick fixed with coach screws complete all as specified and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantlings (framed work) 40sqcm and over in section, in any position complete all as specified and as directed.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

Taking down existing copper/aluminium point wiring (Light/Fan /Socket or Power Point) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets), removing materials from site and making good the disturbed surfaces of walls, floors etc as per existing specification ccomplete all as specified and as directed.

Taking out existing copper/aluminium sub main wiring of any size and making good the disturbed surfaces complete all as specified and as directed.

Taking down MCB distribution boards with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall/ceiling/roof etc including cutting & chases (making good all to the disturbed surfaces as per existing) including modular flush metal boxes with sheet, cover plate and frame for mounting modular switches, sockets, regulators etc or including including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified and as directed for the followings:-

One light/fan/exhaust fan point controlled by one way switch 5 amp complete all as specified and as directed.

One light point controlled by two way switch 5 amp complete all as specified and as directed.

One bell point controlled by one way switch complete all as specified and as directed.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board complete all as specified and as directed.

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board complete all as specified and as directed.

M&L for Point wiring with 2.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 2.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II and as directed.

M&L for Point wiring with 4 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 4Sqmm size in green colour complete all as specified in current SSR Part-I & II and as directed.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.

Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.

Supply and Fixing Modular bell push 6 Amps one module complete all as specified and as directed.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed.

Supply and Fixing switch piano flush type 5 Amps single pole one-way complete all as specified and as directed.

Supply and Fixing socket outlet flush type 2-in-1, 3 pins 5 Amps multipurpose complete all as specified and as directed.

Supply and Fixing switch flush type 2-in-1,3 and 5 pins 15 Amps multipurpose complete all as specified and as directed.

Supply and Fixing socket outlet flush type 2-in-1,3 and 6 pins 15 Amps multipurpose complete all as specified and as directed.

Supply and Fixing switch piano flush type 5 Amps single pole two-way complete all as specified and as directed.

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.

Supply and Fixing bell Push switch flush type 6 Amps single pole one-way complete all as specified and as directed.

Supply and fixing Bell Multi Music type, 230 Volts complete with connection complete all as specified and as directed.

M&L for Sub Main Wiring with 4 runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire complete all as specified and as directed. Note: Four runs of 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

M&L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement of LED T-5 Intergrated Batten PC housing extruded 2' light fittings 9W complete with all acessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement of Recess Type LED light fitting 2X2, Square shape 24W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F in replacement of Recess Type LED adjustable downlighter with COB technology round shape 18W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F in replacement of Recess Type LED light fitting 2X2, Square shape 36W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F in replacement of Recess Type LED light fitting 2X2, Square shape 30W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F LED retrofit lamp 9 Watt complete all as specified and as directed.

S&F in replacement decorative wall light fitting including 7.5/9W LED lamp complete all as specified and as directed.

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, LED Bulk Head fitting of 10 Watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed.

S&F in replacement of building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 30 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core copper conductor cable with suitable size complete all as specified and as directed.

Supply & fixing MS louvers with nuts, bolts and washers suitable for exhaust fan upto 350 mm sweep of any description/make/model complete all as specified and as directed.

Supply & fixing MS louvers with nuts, bolts and washers suitable for exhaust fan upto 450 mm sweep of any description/make/model complete all as specified and as directed.

S&F PVC insulated sheathed 1.5 sqmm 3 core cable 1100 volts grade ISI marked copper conductor complete all as specified and as directed.

S&F PVC insulated sheathed 2.5 sqmm 3 core cable 1100 volts grade ISI marked copper conductor complete all as specified and as directed.

Supply only down rod MS grade 15 mm bore of length upto 90 cm size for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as specified and as directed.

Supply and fixing in replacement step type electronic fan regulator switch type on the existing phenolic laminated sheet including taking down the old unserviceable one complete all as specified and as directed.

Supply and fixing in replacement step type electronic fan regulator socket type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply only capacitors 2.5 MFD suitable for all types of fans complete all as specified and as directed.

S&F TP&N Vertical Loadline distribution board, 8 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 250Amp, two neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 8 way complete with provision for 125 Amps MCCB as incomer including fitting suitable for MCBs with connection complete all as specified and as directed Note : - (i) MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items. (ii) MCB & MCB/MCCB DBs shall be measured and paid separtely under relevant items of this BOQ.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 250Amp, two neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete with provision for 63Amps MCCB as incomer including fitting suitable for MCBs with connection complete all as specified and as directed Note : - (i) MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items. (ii) MCB & MCB/MCCB DBs shall be measured and paid separtely under relevant items of this BOQ.

S&F sheet metal enclosure MCB distribution board, TPN 4Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 8Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 6Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 4Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

Supply and fix SP enclosure modular type with a two pin and earth plug and socket complete with SP MCB of rating 20-32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing in replacement of MCCB 125 Amp rating, (ICS=100% of ICU) 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA complete all as specified and as directed.

S&F MCCB 63 Amps, 'C' series, breacking capacity 16KA, 4 pole, 240V complete all as specified and as directed.

S&F MCB TPN 40 to 100 Amps, 'C' series, breaking capacity 10KA, 415V including taking down old MCB's complete all as specified and as directed.

S&F MCB TP 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F MCB DP 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

Supply & fixing of MCB SP 6-32 Amps, 'B' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F modular white cover plate with frame, 1 module complete all as specified and as directed.

S&F modular white cover plate with frame, 2 module complete all as specified and as directed.

S&F modular white cover plate with frame, 3 module complete all as specified and as directed.

S&F modular white cover plate with frame, 4 module complete all as specified and as directed.

S&F modular white cover plate with frame, 6 module complete all as specified and as directed.

S&F modular white cover plate with frame, 8 module complete all as specified and as directed.

S&F Modular metal flush sunken box 1/2 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 3 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 4 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 6 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 8 Module complete all as specified and as directed.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete all as specified and as directed.

Ms Kamal Kant Agarwal

B S ENTERPRISES