Construction of a bridge at 0.3 km from National Highway-4 to Yamakanamaradi via Deri (Village Road No. 287) in Hukkeri Taluk (near Hattaragi village) in Belagavi District under HOA 5054-80-190-0-01-132 for the FY 2026-27

PÉ®¸ÀzÀ ºÉ¸ÀgÀÄ : ¨É¼ÀUÁ« f¯Éè aPÉÆÌÃr vÁ®ÆQ£À §¼ÉÆèÁ PÁæ¸ï¢AzÀ ªÀÄÄzsÉÆüÀ ¤¥Áàt gÀ¸ÉÛ ªÀgÉUÉ ªÁíAiÀiÁ gÁªÀÄ¥ÀÆgÀ gÀ¸ÉÛ ¸ÀÄzsÁgÀuÉ ªÀiÁqÀĪÀÅzÀÄ. (UÁæ«ÄÃt gÀ¸ÉÛ)

Sl no Items Qty Rate Amount

Construction of Road

2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 2057.75 31.50 64819.13 4115.50 2057.75 31.50 64819.13 50% 129638.25

7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 4137.50 30.40 125780.00 8275.00 4137.50 30.40 125780.00 50% 251560

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 4137.50 10.67 44147.13 8275.00 4137.50 10.67 44147.13 50% 88294.25

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 103.44 7867.49 813793.50 206.88 103.44 7867.49 813793.50 50% 1627586.994

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 215.31 445.20 95857.13 430.63 215.31 445.20 95857.13 50% 191714.25

Construction of Road

2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 2057.75 31.50 64819.13 4115.50 2057.75 31.50 64819.13 50%

7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 4137.50 30.40 125780.00 8275.00 4137.50 2571.45 10639374.38 50%

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 2482.50 10.67 26488.28 8275.00 2482.50 30.40 75468.00 30%

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 62.06 7867.49 488276.10 206.88 62.06 7867.49 488276.10 30%

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 129.19 445.20 57514.28 430.63 129.19 445.20 57514.28 30%

Construction of Road

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 1655.00 10.67 17658.85 8275.00 1655.00 10.67 17658.85 20%

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 41.38 7867.49 325517.40 206.88 41.38 7867.49 325517.40 20%

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 86.13 445.20 38342.85 430.63 86.13 445.20 38342.85 20%

11 KSRRB M800-13. Road marking with Hot Applie Thermoplastic Compound with Reflecting Glass Beads on Bitumimous Surface :- Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. (P No-179 / 24.15) MORTH specification No. 803 sqm 375.00 537.60 201600.00 0.00 537.60 0.00 100% 201600.00

15 KSRRB M800-2. Retro-Reflectorised Traffic Signs :- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 800.1.3, fixed over Aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing complete as per specifications. MORTH Specification No.801 (P No-177 / 24.2.4.1) 80cm x 60cm rectangular - Type-IV sqm 2.00 3867.15 7734.30 0.00 3867.15 0.00 100% 7734.30

16 KSRRB M800 Road markers / Road stud KSRRB M800-35. Providing and fixing of road stud 100x 100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS: 873 part 4:1973 complete as per specifications (P No-184 / 24.41) no 80.00 352.80 28224.00 0.00 352.80 0.00 100% 28224.00

PÉ®¸ÀzÀ ºÉ¸ÀgÀÄ: ºÀÄPÉÌÃj vÁ®ÆQ£À UÁæ«ÄÃt gÀ¸ÉÛ gÁ¶ÖçÃAiÀÄ ºÉzÁÝj-4 jAzÀ AiÀĪÀÄPÀ£ÀªÀÄgÀr ªÁAiÀiÁ qÉÃj (ºÀ½î gÀ¸ÉÛ £ÀA.287) Q.«Äà 0.3gÀ°è ¸ÉÃvÀÄªÉ ¤ªÀiÁðt (ºÀvÀÛgÀV UÁæªÀÄzÀ ºÀwÛgÀ)

Sl no Items Unit Qty Rate Amount Milestone -1 Quantity Milestone -2 Quantity Milestone -3 Quantity Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs

1 Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead Dismantling Stone Masonry (ii) By Mechanical Means Dismantling Brick / Tile work / rubble masonry / pitching / etc by Mechanical means cum 21.75 189.00 4110.75 21.75 0.00 0.00 21.75 189.00 4110.75 0.00 0.00 4110.75 TRUE 19559.61

2 Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead (ii) By Mechanical Means b. Prestressed / RCC grade M-20 & above cum 102.82 1163.40 119620.79 102.82 0.00 0.00 102.82 1163.40 119620.79 0.00 0.00 119620.79 TRUE 19559.61

3 Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. Above 900 mm Rmt 45.00 1442.70 64921.50 45.00 0.00 0.00 45.00 1442.70 64921.50 0.00 0.00 64921.50 TRUE 22050

4 Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 635.42 436.57 277405.31 635.42 0.00 0.00 0.00 436.57 277405.31 0.00 0.00 277405.31 TRUE 3016605.375

5 Providing and fixing 25mm diameter steel anchor dowel in hardrock including drilling hole of 32 mm diameter up to 0.75 mtrsdepth, placing the dowel in position and effectively grouting thehole with CM 1:1 proportion etc. complete. No. 918.00 1312.50 1204875.00 918.00 0.00 0.00 0.00 1312.50 1204875.00 0.00 0.00 1204875.00 TRUE 5055950.34

6 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 40.65 6213.90 252595.04 40.65 20.33 0.00 0.00 6213.90 252595.04 0.00 0.00 252595.04 TRUE 5204299.72

7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 48.30 7565.21 365399.64 48.30 0.00 0.00 0.00 7565.21 365399.64 0.00 0.00 365399.64 TRUE 5204299.72

8 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 52.46 7966.58 417926.79 52.46 0.00 0.00 52.46 7966.58 417926.79 0.00 0.00 417926.79 TRUE 322875

9 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 143.69 7786.51 1118843.62 143.69 0.00 0.00 143.69 7786.51 1118843.62 0.00 0.00 1118843.62 TRUE 110250

10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 131.53 9127.56 1200547.97 0.00 131.53 0.00 131.53 9127.56 0.00 1200547.97 0.00 1200547.97 TRUE 4449324.94

11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / softannealed steel wire and other ancilary operations complete as per drawing and technical specification Foundations of Bridges Tonne 7.370 91670.25 675609.74 0.00 7.37 0.00 7.37 91670.25 0.00 675609.74 0.00 675609.74 TRUE 2948018.976

12 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (Vol.-3, P.No.74, I.No.8.43) Tonne 10.70 91908.60 983422.02 0.00 10.70 0.00 10.70 91908.60 0.00 983422.02 0.00 983422.02 TRUE 278712

13 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / softannealed steel wire and other ancilary operations complete as per drawing and technical specification Super structure of Bridges Tonne 11.80 92145.90 1087321.62 0.00 11.80 0.00 11.80 92145.90 0.00 1087321.62 0.00 1087321.62 TRUE 67542699.64

14 PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification Cum 15.16 7063.35 107080.39 0.00 15.16 0.00 15.16 7063.35 0.00 107080.39 0.00 107080.39 TRUE

15 Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant) Cum 30.33 11761.05 356712.65 0.00 30.33 0.00 30.33 11761.05 0.00 356712.65 0.00 356712.65 TRUE

16 Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and TechnicalSpecifications. (Batching Plant) Cum 19.83 13741.35 272463.49 0.00 0.00 19.83 19.83 13741.35 0.00 0.00 272463.49 272463.49 TRUE

17 Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Cum 120.14 2810.85 337695.52 0.00 0.00 120.14 120.14 2810.85 0.00 0.00 337695.52 337695.52 TRUE

18 Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification No 8.00 3434.55 27476.40 0.00 0.00 8.00 8.00 3434.55 0.00 0.00 27476.40 27476.40 TRUE

19 Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm (in traffic direction), covered with a closure plate of 200mm x 6mm of weldable structural steel conforming to IS: 2062, asphaltic plug to consist of polymer modified bitumen binder, carefully selected single size aggregate of 12.5 mm nominal size and a heat resistant foam caulking/ backer rod, all as per approved drawings and specifications. m 30.33 1884.75 57164.47 0.00 0.00 30.33 30.33 1884.75 0.00 0.00 57164.47 57164.47 TRUE

20 Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications Nos/mtr 46.60 144.90 6752.34 0.00 0.00 46.60 46.60 144.90 0.00 0.00 6752.34 6752.34 TRUE

21 Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification Granular material Cum 702.50 1226.40 861546.00 0.00 0.00 702.50 702.50 1226.40 0.00 0.00 861546.00 861546.00 TRUE

22 Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications A Stone/Boulder Cum 12.00 2007.60 24091.20 0.00 0.00 12.00 12.00 2007.60 0.00 0.00 24091.20 24091.20 TRUE

23 Boundary pillar / Guard Stone Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting Each 40.00 769.65 30786.00 0.00 0.00 40.00 40.00 769.65 0.00 0.00 30786.00 30786.00 TRUE

24 Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. M 52.30 2173.50 113674.05 0.00 0.00 52.30 52.30 2173.50 0.00 0.00 113674.05 113674.05 TRUE

25 Providing and erecting a Thrie Beam crash Barrier (MASHTL4/EN1317 H2 complaint) Installed by Pile Driving Machineas per MoRTH CircularRW/NH-29023/02/2019- S&R(P&B)dated 01.01.2020. The same should be hot Dip Galvanized as per Indian standard with 550 g/m2 coating on beams and post and all fittings to conform according to IS 1367 and IS 1364. M 15.00 4781.70 71725.50 0.00 0.00 15.00 15.00 4781.70 0.00 0.00 71725.50 71725.50 TRUE

26 Painting on concrete surface Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2. M 105.80 88.20 9331.56 0.00 0.00 105.80 105.80 88.20 0.00 0.00 9331.56 9331.56 TRUE

27 Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. (II)90 cm equilateral triangle M 2.00 4971.75 9943.50 0.00 0.00 2.00 0.00 4971.75 0.00 0.00 9943.50 9943.50 TRUE

28 Supplying and installation of delineators (road way indicators,Hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79-2019 and the drawings. M 4.00 2122.05 8488.20 0.00 0.00 4.00 4.00 2122.05 0.00 0.00 8488.20 8488.20 TRUE

Approach road TRUE

1 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density asgiven in Table 300-2 for embankment construction Cum 63.28 110.25 6976.76 0.00 0.00 0.00 63.28 110.25 0.00 0.00 6976.76 6976.76 TRUE

2 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 603.60 497.70 300409.23 0.00 0.00 0.00 603.60 497.70 0.00 0.00 300409.23 300409.23 TRUE

3 Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 PWD SR 2024-25Vol 3 Item No 3.6 ( Page No 17 ) Construction of sub-grade and earthen shoulders with approved material ( CBR min 10 %) obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum 391.50 517.65 202659.98 0.00 0.00 0.00 391.50 517.65 0.00 0.00 202659.98 202659.98 TRUE

4 For Grading -V Material, Plant Mix Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 Cum 120.81 2611.35 315477.19 0.00 0.00 0.00 120.81 2611.35 0.00 0.00 315477.19 315477.19 TRUE

5 Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cum 133.60 2686.95 358976.52 0.00 0.00 0.00 133.60 2686.95 0.00 0.00 358976.52 358976.52 TRUE

6 Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mechanical means. Sqm 513.23 66.15 33950.16 0.00 0.00 0.00 513.23 66.15 0.00 0.00 33950.16 33950.16 TRUE

7 Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom Sqm 513.23 18.90 9700.05 0.00 0.00 0.00 513.23 18.90 0.00 0.00 9700.05 9700.05 TRUE

8 Bituminous Macadam Grading - II for traffic <20 MSA Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction Cum 25.04 10391.85 260211.92 0.00 0.00 0.00 25.04 10391.85 0.00 0.00 260211.92 260211.92 TRUE

9 Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alig\nment and rolled as per MoRTH V revision. Cum 12.51 14281.05 178655.94 0.00 0.00 0.00 12.51 14281.05 0.00 0.00 178655.94 178655.94 TRUE

10 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. M 2 22.50 556.50 12521.25 0.00 0.00 0.00 22.50 556.50 0.00 0.00 12521.25 12521.25 TRUE

11 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment No. 500.00 of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. No 30.00 383.25 11497.50 0.00 0.00 0.00 30.00 383.25 0.00 0.00 11497.50 11497.50 TRUE

Add for GST 18% 2116542.16

Add for Tender Premium 5% 693755.48

Add for Price Contingency 431134.82

Estimate Amount 15000000.00

Percentage 32% 38% 30% 100%

1 19.59 KSRRB M300-52.2. Scarifying Existing Bituminous surface to a depth of 50mm by Mechanical Means. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material and complete as per specifications. MORTH Specification No. 305.4.3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 3840 3.57 13708.8 View RA

2 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3904.2 31.5 122982.3 View RA

3 19.64 KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTH / Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 11640 6.3 73332 View RA

4 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 2541.1875 502.95 1278090.25 View RA

5 20.5 Construction of granular sub-base Grading-V as Sub-base and drainage layer by providing coarse graded crushed stone aggregates of granite/trap/basalt material, mixing by mix in place method by rotavator at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98 % proctor density, complete as per specifications. Clause 401 of MORTH V Revision. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1499.4 1837.5 2755147.5 View RA

6 22.1.2 KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC 1:5:10 base with OPC 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-base, coarse and fine aggregate conforming to IS: 383-2016,aggregate cement ratio not to exceed 15:1, Aggregate gradation after blending to be as per Table 600-1,optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications. Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 150 kg/cum and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hr capacity with fixed form paver. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 591.3 3953.25 2337556.72 View RA

7 22.2.2 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cement Pavement Quality concrete for pavements using Grade concrete M40 having Flexural strength not less than 4.50 Mpa over a prepared base with OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading materials to batch mix plant by front end loader,mixed in a cement concrete batch mix plant as per approved mix design,transported to site in transit truck agitator 5 cum capacity, laid with Paver, compacted and finished in a continuous operation as per IRC-15 including cost for providing of contraction,expansion, co nstruction and longitudinal joints, joint filler, separation membrane of impermiable plastic sheet of 125 micron, groove cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries, aII lead & lift charges etc., complete as per specifications. Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 420 kg/cum and coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete Batch mix Plant at 75 cum/hr capacity with Slip form paver with electronic sensor. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 978.75 5757.15 5634810.56 View RA

8 34.17 Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 16.2 5268.9 85356.18 View RA

9 20.18 KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 150.375 1917.3 288313.99 View RA

10 21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 701.25 35.7 25034.63 View RA

11 21.1 KSRRB M500-10. Providing and applying tack coat using 80/100 grade bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.20 kg per sqm on the existing prepared bituminous surface cleaned with mchancial broom. complete as per specifications. - using bitumen 80/100 on primed surfaces ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 701.25 12.6 8835.75 View RA

12 21.11.6 KSRRB 500-11. Providing and laying bituminous macadam on prepared surface with crushed coarse aggregates as per design mix formula for base / binding course including loading of aggregates with F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixd material in tipper to paver and laying mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density, but excluding cost of primer / tack coat including lead, lift and cost of all materials, labour, HOM of machineries complete as per specifications. MORTH /Chapter 5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 3.3 % VG-30 Bitumen ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 35.0625 6252.75 219237.05 View RA

13 21.20.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects complete as per specifications. - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30 mm) with 5 % VG-30 Bitumen ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 17.5313 8262.45 144851.49 View RA

14 24.17 KSRRB M800-14.2. Reinforced cement concrete M-15 Grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc complete as per specifications.including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 1 2261.7 2261.7 View RA

15 24.18 KSRRB M800-14.3. Reinforced cement concrete M-15 Grade Hectometer stone of standard design as per IRC:26-1980, fixing in position including painting and printing etc complete as per specifications. including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 3 573.3 1719.9 View RA

16 24.15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 209.9997 450.45 94594.36 View RA

17 24.41 KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 216 303.45 65545.2 View RA

18 24.2.1 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 900 M M Equilateral triangle -TYPE XI ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. No 4 3639.3 14557.2 View RA

19 24.3 Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below ground level as per approved drawing. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 2.16 7220.85 15597.04 View RA

20 14.7 KSRB 14.6-2 :Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications. Specification No. KBS ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 6840 1014.3 6937812

1 27.13 “KSRRB M2100-5.2. Earth work in excavation for foundation of structures as per drawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specifications. “V. Marshy soil - B. Mechanical Means MORTH Specification No. 304 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3060 152.25 465885

2 34.15.2 Earth work in excavation for foundation of structures like culverts, retaining walls etc., as per drawing and technical specification, including setting out, construction of shoring and bracing, dressing of sides and bottom, backfilling with approved material, disposal of balance earth as per specifications, including cost of labour, HOM etc. , complete. in all kinds of soil by mechanical means. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3249.342 47.25 153531.41

3 34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 600.1628 4506.6 2704693.67

4 37.59.2 Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications. Wall & bottom thickness 15cm ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1246.5 7269.15 9060995.48

5 28.8.2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Tonne 78.14 70920.15 5541700.52

6 34.17 Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 313.9866 5268.9 1654364

7 34.6.6 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 1200mm. dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 45 8848.35 398175.75

8 34.6.2 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 450mm. dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 120 2711.1 325332

9 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1528.3602 502.95 768688.76

10 27.4 “KSRRB M2100-2.1. Earth work in excavation for foundation of structures as perdrawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specifications. B. Mechanical Means (i ) Depth upto 3 m” MORTH Specification No. 304 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1087.5 52.5 57093.75

11 11.56.1 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, with 90mm outer dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 2900 452.55 1312395

ategory : Vol - 3 -Chapter -2- SITE CLEARANCE --- 393 412.65 149.16 61550.87

Item Code : 2.5.ii.a

Item Description : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer - In area of light jungle

Rate Analaysis Performed ?: Yes

2 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 6 6.3 1715 10804.5

Item Code : 3.5

Item Description : Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 305.4.3

Rate Analaysis Performed ?: Yes

3 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 4 4.2 1715 7203

Item Code : 3.11

Item Description : Preparation and Surface Treatment of Formation. - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 t smooth wheeled roller, complete as per clause 310. Ref to MoRT&H : IRC - 310

Rate Analaysis Performed ?: Yes

4 Category : Vol - 3 -Chapter -16- PANCHAYATH RAJ ENGINEERING DEPARTMENT ITEMS --- 25 26.25 17402 456802.5

Item Code : 16.8.b

Item Description : Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. - Mechanical Means. Ref to MoRT&H : IRC - 307

Rate Analaysis Performed ?: Yes

5 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE ---

Item Code : 3.6

Item Description : Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305

Rate Analaysis Performed ?: Yes

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Attach letters of Acceptance received.

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of Work Names of Employers 2018-19 Remarks (Indicate contract reference)

January February march April May June July August September October November December

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

Progress * : 2018-19

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2019-20

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2020-21

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2021-22

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2022-23

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion

9 Actual Date of Completion/ Probable Date of Completion

10 Cost of balance work (if work is in progress) :

11 Reasons if any for delay in completion, if work completion is delayed :

12 Penalty if any imposed :

13 Any other information :

* Monthwise progress shall be furnished seperately.

Date: (Authorised Signatory)

Address for correspondence:

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs. lac)

Billed upto date during 2023-24

Attach Chartered Accountant's Yearwise Statements.