Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹24,700
Closing Date
5 Jun 2026, 3:00 pmDue today
Ex. Engineer (EandM) M-10
Office of the Ex. Engineer (EandM) M-10, Inside Command Tank-1, Pocket-1, Sector-7 Dwarka
Renovation of LT panel with 1600 Amp. ACB LandT make installed at CT-3 Dwarka AC-34.
2026_DJB_292344_3
NIT No. 4 (2026-27)
Open Tender
Miscellaneous Works
Office of the Ex. Engineer (E and M) M-10
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Account No SB 06121000095461
₹24,700
Yes
30 May 2026
30 May 2026
5 Jun 2026
30 May 2026
5 Jun 2026
30 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1.01 | Air circuit breakers (ACB), 3 pole, 1600Amp.M DO type with microprocessor based with both side terminal adapter Make L&T | 1 | No | - | - | item1 |
| 1.02 | MCCB 400Amp. TP 415V with spreader terminal 50Ka Make L&T | 2 | No | - | - | item2 |
| 1.03 | Making tripping system in INCOMER against various fault by P/F of Microprocessor based over current /earth fault relay with data recording & display Make: L&T | 2 | No | - | - | item3 |
| 1.04 | Motor protection Relay with Thermal over load, short circuit, earth fault protections Make: L&T | 6 | No | - | - | item4 |
| 1.05 | Replacement of Amp. Meter digital with selector switch Make: L&T | 9 | No | - | - | item5 |
| 1.06 | Replacement of Volt Meter digital with selector switch Make: L&T | 1 | No | - | - | item6 |
| 1.07 | Replacement of UV release Make: L&T | 2 | No | - | - | item7 |
| 1.08 | Retrofitting of ACB (1600A,3 Pole) as above in existing panel by carring out following works:- 1) • Supply of necessary hardware, supports etc. 2) • Making /supply of M.S angle base frame/supports of size as suitable to the mounting of new ACB. Fixing of the same at the panel chamber with the help of nuts bolts /welding etc. as suitable for installation of new ACB /their cradles. 3) • Dismantling the existing circuit breaker from the chambers of the LT panel including its cradles and disconnecting the bus bar connections with the main bus bars, disconnecting the outgoing cables etc.. 4) Installation of new ACB cradle in the panel by the help of nuts bolts etc in proper alignment for connecting the bus bars. Fixing the ACB in the cradles in the proper condition including checking the movement. Making control wiring connection for the ACBs. 5) • Connecting the main bus bars to the incoming sides of the ACB by re-arrangement /modification/addition of bus bar lengths in Aluminum construction for retrofitting of ACB. 6) making a new M.S. door in 2mm CRCA Sheet ,powder coated as suitable size to match symmetry, Connecting the bus bar at the outgoing side of the ACB by re-arrangement/ modification/addition of bus bar lengths in Aluminum for retrofitting of ACB. 7) • Testing of the ACB for ON –OFF operation first at NO load and then at ON load including operation, manual charging system etc. | 1 | Job | - | - | item8 |
| 1.09 | Fixing of motor protection relays & over current & earth fault relay in incomer by doing necessary modification in panel door for fixing the sane and control wiring with coper wire & setting of various fault protection as per site requirments | 8 | Job | - | - | item9 |
| 1.1 | Fixing of MCCB in existing panel by necessary modification in door etc. including required bus bar, links etc . & making cable connection | 2 | Job | - | - | item10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.96 MB
NIT04.pdf
Tender Documents • 0.95 MB
BOQ_388288.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid