Works Contract for Deviation of HT line due to hindrance of the plot crossing as

Amount

Excavation and Erection of RCC, REC, PSC poles above 8.00m length by using JCB/Manual with base plate.

Excavation and Erection of metal supports above 9m/RSJ/Rail pole/Tubular pole with Steel plate. (In rocky area)

Excavation and Erection of stay set complete with fixing up stay wire Eye, Bow,Guy Shackle, Binding, Stay Plate etc.

Fixing of HT Tapping X arm /guarding X ARM

Fixing of HT V Cross arms 3 1/2, 4 1/2 & 5 feet

Fixing of LT 3 Phase cross arm

Fixing of HT / LT TI Fitting

Fixing of HT Pin Insulators (11/33KV)

Fixing of HT 11KV stain disc

Fixing of LT Pin Insulator

Fixing of Aluminium knob

Paving and stringing of conductors of sizes above 7/2.59 mm ACSR or other equivalent conductor /AB Cable upto 7/3.35mm ACSR. (route length)

Releasing and re erection (resagging) of one run of all size of conductor

Erection of Distribution transformer at structures above 25KVA to 100KVA

Erection of Distribution Transformer structure complete as per TNEB standard including painting, feeders arrangements, colour washing of RCC pole etc., Fixing of poles type to be unit HT /LT LAS and jumpering 3 Nos Earth pits with earth trough except erection of Distribution Transformer.(Data as per Annexure II)

Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, concreting, painting, colour washing etc.,(Data as per Annexure I)

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) for a lead upto 5KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) Above 5KM of lead of every KM

Transporting of Distribution Transformer / Line materials from Sub stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Transporting of Distribution Transformer from stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Loading/Unloading of DT upto 100KVA

Loading/Unloading of variouse size of REC, RCC,PSC Poles above 8.0m length

Loading/Unloading of metal Poles of all sizes

Loading/Unloading of line material

Earthing of poles with GI wires 4/ 6/8 SWG by coil earthing

Cement Concrete of ratio for individual poles shall be in the ratio of 1:2:4 (1 part Cement, 2 parts coarse sand and 4 parts 20mm aggregate stones chips)(material +labour) Mass concreting of poles

Dismantling of RCC,REC,PSC & metal pole of all size

For Breaking of Mass concrete of all supports

Dismantling of Transformer Structure materials complete set

Dismantling of X arms

Drilling of hole in channel only 3/4" & 1" per hole

Open type side arm stud, cutting, drilling holes

Alteration of clamp

Tree cutting

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder