Petty repair to certain building for day to day maint at New Mil Stn Kapurthala under GE Kapurthala.

Amount

Taking down and refixing of shutter of any description area exceeding 1.00 Sqm but n.exc 2.00 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter complete all as specified and directed.

Resecuring or easing and adjustment without taking down the shutter of any description exc 2 sqm each complete all as specified and directed.

S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.00 mm and fixed with tinned tacks of galvanised wire stapple etc wooden/filletscomplete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed.

S&F of 3.00mm thick plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n.exc 0.50 sqm each pane and glazing with metal beads all as specified all as specified and directed.

S&F of 4.00mm thick figured glass, pin head type and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and directed. .

S&F in repairs aluminium tower bolt 200mm with bright bolt and fixed cocomplete all as specified and directed.

S&F in repairs 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified and directed.

S&F in repairs 125mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F in repairs 150mm aluminium handles, cast type, anodised complete all as specified and directed.

M&L for mild steel pipe 25mm dia curtain rod with Powder coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as specified and directed.

M&L for providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete all as specified and directed.

Taking up or down steel tubing including connection, 15mm bore including cleaning of serviceable pipe for re-fixing complete all as specified and directed.

Taking up or down steel tubing incl connection, 15mm bore unserviceable pipe for removal to store complete all as specified and directed.

Taking up or down steel tubing including connection, 20mm bore including cleaning of serviceable pipe for re-fixing complete all as specified and directed.

Taking up or down steel tubing including connection, 20mm bore unserviceable pipe for removal to store complete all as specified and directed.

S&F of mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors incl excavation complete all as specified.

S&F of mild steel tubes, 20 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified and directed.

S&F in repairs galvanized iron socket for 15mm bore pipe including taking down and refixing pipes of any length as approved by Engr-in-charge complete all as specified and directed.

S&F in repairs galvanized iron socket for 20mm bore pipe including taking down and refixing pipes of any length as approved by Engr-in-charge complete all as specified and directed.

S&F in repairs galvanized iron nipple 15mm bore, 50mm long including taking down and refixing pipes of any length as approved by Engr-in-charge complete all as specified and directed.

S&F in repairs galvanized iron nipple 15mm bore, 100mm long including taking down and refixing pipes of any length as approved by Engr-in-charge complete all as specified and directed.

S&F in repairs galvanized iron nipple 20mm bore, 50mm long including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron nipple 20mm bore, 100mm long including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron union 15mm bore including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron union 20mm bore including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron elbow 15mm bore including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron elbow 20mm bore including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron Tee 15mm bore including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs galvanized iron Tee 20mm bore including taking down and refixing pipes of any length complete all as specified and directed.

S&F in repairs 20mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F in repairs 15mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F in repairs 25mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F in repairs 10 ltrs cpapacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified and directed.

Petty repairs to low level flushing cistern adjustement of syphon, repairs of washer, adjustement of handle, float valve as requried for making the cistern functional complete all as specified and directed.

S&F in repairs brass chromium plated bottle traps of 32 mm dia for wash basins with inlet and outlet screwd fro pipe or connectins including necessary packing, union and cap and fixed all as specified and directed.

S&F in repairs fancy type 15mm bore bib tap cast copper chromium plated long body with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified and directed.

S&F in repairs fancy type pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore CP brass mixer Hot & Cold for WHB/Sink complete all as specified and directed.

S&F in repairs brass CP wall mixer with L bend for connection to overhead shower for mixing hot & cold water screwed down for iron pipe and fixed of 15mm bore complete all as specified and directed.

S&F in repairs arms/legs for WHB/ Sink mixture, wall mixture with L-bend of any dia, of any size including necessary fittings complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density PVC 32mm dia for low level cistern incl all joints complete all as specified and directed.

S&F syphonic action rod with float valve (Complete kit) for low level cistern fixed in repair complete all as specified and directed.

S&F in repairs brass spindle, any length, for bib tap, stop cock 15mm dia complete all as specified and directed.

S&F in repairs brass spindle, any length, for bib tap, stop cock of any dia complete all as specified and directed.

S&F in repairs brass spindle, any length, for L bend mixture, centre hole mixture of any dia complete all as specified and directed.

S&F in repairs disc, any length,any size for L bend mixture, centre hole mixture of any dia complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan ORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down Water closet pan (pedestal pattern) "with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket , including fixing of all fittings (excluding of pillar cock, waste coupling and pvc waste pipe complete all as specified and directed.

S&F in repairs CP waste coupling (half or full threaded ), (minimum weight 32mm, 45 gms) complete all as specified and directed.

- ditto - all as per above ser item No. 54 but 40mm bore for steel sink complete all as specified and directed.

Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified and directed.

S&F in repairs towel rail 600mm long PTMT and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above the ground level) complete all as specified and directed.

M&L for PCC type E2(1:5:10) using 40mm graded aggregate thick as in sub base complete all as specified and directed.

Petty repairs to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable in all means complete all as specified and directed.

S&F of PVC cover of any pattern water tank cap 500/1000 ltrs with locking arrangement complete all as specified and directed.

S&F in repairs CP grating of any dia (Square/circular) with or without hole as per requirement and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified and directed.

S&F in repair PVC waste pipe 32mm bore, for WHB complete all as specified and directed.

S&F in repair PVC waste pipe 40mm bore, for sink complete all as specified and directed.

S&F PVC connection 600mm long with brass nuts suitable for 15mm bore pipe complete all as specified and directed.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for 10 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of plastered and unplastered surfaces of wall and applying two coats of oil bound distemper done by proper roller over 2.00mm wall care putty complete all as spedifed and directed.

M&L for preparation of plastered and unplastered surfaces of wall and applying two coats of exterior emulsion/ weather proof paint complete all as specified and directed.

M&L for renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specifed and directed.

M&L for PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tiles finished even and smooth etc complete all as specified and directed.

M/L for glazed ceramic coloured tiles in vertical surface 300 x200 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4) complete all as specified and directed.

S&F in repairs CP Jet for EWC including flexible pipe complete all as specified and directed.

M&L for running welding in repair, any thickness of metal to be welded n.exc 2.5cm in length complete all as specified and directed.

Disconnecting existing water tanks (PVC and RCC) setting aside (or lowering if required) for repairs, including Cleaning and removing all scale and dirt,chlorinating etc, from tanks and from mouths of circulating pipes, etc. cleaning etc and hoisting if required, reconnecting and refixing in position all as specified in SSR for capacity exc 250 & n exc 500 Litres complete all as specified and directed.

Disconnecting existing water tanks(PVC and RCC) setting aside (or lowering if required) for repairs, including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. cleaning etc and hoisting if required, reconnecting and refixing in position all as specified in SSR for capacity exc 500 & n exc 1000 Litres complete all as specified and directed.

Disconnecting existing water tanks(PVC and RCC) setting aside (or lowering if required) for repairs, including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. cleaning etc and hoisting if required, reconnecting and refixing in position all as specified in SSR for capacity exc 1000 & n exc 2000 Litres complete all as specified and directed.

S&F in repais new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked,white coloured, hoisted & fixed in position , capacity 500 litres, including dismantling of unserviceable tank and removing from site complete all as specified and directed.

S&F in repais new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 1000 litres, including dismantling of unserviceable tank and removing from site complete all as specified and directed.

S&F in repairs new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 2000 litres, including dismantling of unserviceable tank and removing from site complete all as specified and directed.

S&F in repairs kitchen sinks of stainless steel 1 mm thick with plugs, washers , incl bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union to pipe , over all size 495mmx420mm bowl size 420mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack, made out 1mm thick stainless steel, size 900x600x200mm with shelves and plate position as approved complete all as specified and directed.

M&L for vitrified ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cm 1:4 complete all as specified and directed.

S&F in repairs PVC cabinet size 450mmx325mmx120mm with looking mirror and making good the disturbed surface complete all as specified and directed.

S&F in repairs hand shower/ health fauset (Chrome Plated) with 8mm dia, 1 metre long flaxible tube & wall hook complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed.

Petty repairs to aluminium window and ventilator shutters, by making minor adjustment to hinges etc easing shutter including taking down of shutter,replacing rubber beading, replacing guide rails, straightening members, replacing members if required and refixing in same position complete all as specified and directed.

Petty repairs to aluminium door shutters, by making minor adjustment floor spring etc easing shutter including taking down of shutter and refixing in same position after providing new rubber beading around the glass, screws etc. complete all as specified and directed.

Taking down aluminium door shutter and repairs of pivot set or replacing of pivot set, aluminium hinges, providing new rubber beading, straightening of members, replacing guide rails for movement of swing door and refixing door shutter same opening complete all as specified and directed.

S&F in repair repairs cast iron body door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with or without swivel joints, 125mm size with arm including fixing to steel pipe or union complete all as specified and directed.

S&F of double legged floor door stopper aluminium alloy body and tongue, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed.

S&F of CP glass corner shelf including CP railing, radius 300mm fixed in repairs complete all as specified and directed.

Petty repairs to cup board (Kitchen)/ including easening of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing handle etc with drawers adjusting of ball catches etc; (One unit shall comprises one cup board irrespective in numbers of shutters and drawers) complete all as specified and directed.

- ditto - all as per above ser item No. 99 but cup board (Bedroom) including drawers complete all as specified and directed.

COSMO BUILDERS (BID ID -3348028)