Repair/maint of different types of winter appliances including connected works and repair/maint of swimming pool installations including day to day complaints of external water supply at Faridkot Mil Stn

Amount

Attending the complaints of unserviceable geysers of any make & capacity, fitted in the existing position by detecting defects /faults by dismantling the accessories carefully after disconnecting the electric connections , taking out defective parts and fixing new parts in position ,assembling the geysers as per original, testing and re-fixing properly at the same place all as specified and as directed. Notes :- Spare parts required for repair shall be measured and paid separately under relevant items as 'supply only'.

S&F in replacement gun metal check valve / non return valve, 15 mm dia suitable for Geyser of any make/capacity complete all as specified and directed.

S&F in replacement pressure release valve ,15 mm dia for geyser suitable for existing complete all as specified and directed.

Supply only heating element 1.5 KW of traingle /round/cup/altro/eterno /banana shape complete all as specified and directed.

Supply only heating element 2.0 KW of traingle /round/cup/altro/eterno /banana shape complete all as specified and directed.

Supply only Thermostate for geyser of any cap/make complete all as specified and directed.

Supply only Thermostate temperature cut out for geyser of any cap/make complete all as specified and directed.

S&F in replacement indicating lamp round type, suitable for geysers of any type and any capacity complete all as specified and directed

Supply and fixing in replacement heating plate assembly suitable for geyser of capacity 50 Ltrs of any type and make with water inlet & outlet, rubber gasket, nuts, bots & washers of required size complete all as specified and directed.

Supply and fixing in replacement heating plate assembly suitable for geyser of capacity 25 Ltrs of any type and make with water inlet & outlet, rubber gasket, nuts, bots & washers of required size complete all as specified and directed.

Supply and fixing in replacement glass wool for geyser vessel of any size and capacity complete all as specified and directed.

Supply and fixing in replacement machine made mild steel holding/anchor bolts of size 10cm to 15cm long and dia of bolt 10mm to 15mm with nuts & washers including making good the disturbed surfaces with existing finishes complete all as specified and directed Note :- Anchor bolt shall be grouted with hammer drill only.

Supply and fixing in replacement dead nut/Safety plug of brass suitable for geyser of any capacity/make complete all as specified and directed .

Supply and fixing in replacement socket out let (encloser type) suitable for Geyser complete all as specified and directed .

Supply and fixing in replacement metal plug top (enclosure type) suitable for geyser complete all as specified and directed.

S&F in repair PVC connection, 15mm bore and 450mm length for connecting main pipe line of hot water with brass nuts & washers at both ends complete all as specified and directed.

S&F in replacement sheet metal enclosure wih socket plug top and MCBs 20 Amp, 240 V, AC Supply, Single Pole and neutral enclosure with a two pin and earth plug with socket complete all as specified and directed .

S&F in repair MCB, SPN, 32 amps, 230V, C Series with breaking capacity 10 KA with connection complete all as specified and directed

S&F in repair MCB SP 5 to 32 Amp, 230 volts, B Curve with breaking capacity 10 KA with connection complete all as specified and directed

Supply and fixing in replacement plug top 15/16 Amps all as specified and directed .

S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.

S&F socket outlet, 2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.

S&F in replacement bottom split inspection cover of geyser of capacity 25 ltrs of any make complete all as specified and directed .

S&F in replacement CPVC tubing having outer dia 16mm, SDR-11 with all fittings fixed to wall/floor complete all as specified and directed . Note- Quoted rate shall deemed to be included for making chases for replacement of pipe and making good the disturbed surfaces to match with existing finishes .

S&F in repair Stop valve, cast copper alloy, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair bib tap,cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore pipe & fixed complete all as specified and directed

S&F in repair galvanised iron, steel tubing, 15 mm bore, medium grade with fittings,and fixed to walls with hooks, ceiling or laid on floor complete all as specified and directed .

S&F in repair GI Socket 15mm dia complete all as specified and directed.

S&F in repair GI Union 15mm dia complete all as specified and directed.

S&F in repair GI Elbow 15mm dia complete all as specified and directed.

S&F in repair GI Nipple 15mm dia ,100mm long complete all as specified and directed.

S&F in repair GI Tee 15x15x15mm dia complete all as specified and directed.

S&F in repair PVC insulated and FRLSH sheathed, circular, flexible, multi stranded, copper cable, 3 core of size 30/0.75 (2.5 sqmm) complete all as specified and directed

S&F in repair High quality evacuated/vacuum glass tube having outer dia 58 mm, internal dia of tube 47 mm , length 1800 mm , thickness of tube not less than 1.8 mm, made from borosilicate to minimize heat loss with triple layer coating for maximum absorption of solar radiation including gasket & mounting screws nut etc suitable for solar water heater complete all as specified and directed .

S&F in repair solar water heating element (ISI marked), 3 KW,single phase complete all as specified and directed.

S&F installation, testing and commissioning in replacement of Solar Hot Water Tank of capacity 500 Ltr made out of 1.2 mm thick stainless steel- 304 with 50mm thick PUF insulation with provision of electrical back up and other safety devices such as thermostat relay etc complete all as specified and directed . Make: TATA BP solar/Intersolar/ luminous/Novel

S&F installation, testing and commissioning in replacement of Solar Hot Water Tank of capacity 300 Ltr made out of 1.2 mm thick stainless steel- 304 with 50mm thick PUF insulation with provision of electrical back up and other safety devices such as thermostat relay etc complete all as specified and directed . Make: TATA BP solar/Intersolar/ luminous/Novel

M&L for servicing of split type AC (hot & cold type) of capacity 1.5 / 2 TR of any type or make by opening the condenser unit fixed on roof top and heating unit fixed inside the building and cleaning the complete condenser unit and heating unit including fins and checking / testing of all parts for its serviceability and oiling /greasing of motors, replacing worn-out bushes of blower, rectification of unusual noise, checking of refrigerant standing pressure, topping of refrigerant gas upto the required level, replacement of minor parts such as nut / bolt washers etc. and re-assembling the complete unit including testing for smooth functioning complete all as specified and directed.

M&L for removing the unserviceable condenser fan motor from Split type A/C of 1.5 / 2.0 TR capacity and fixing new condensing motor in original position with new washer nuts & bolts complete all as specified and directed.

M&L for removing the unserviceable reciprocating compressor sealed unit of any type or make from split type air conditioner (hot & cold type) of capacity 1.5/2.0 TR after cutting the copper tubing without any damage to existing parts, replacing the compressor with reconditioned compressor of same make & capacity complete with erection of compressor on base with suitable capillary, filters etc jointing/brazing of copper refrigerant suction and discaharge pipe line with and including charging of refrigerant gas to required level complete including cleaning of condenser fins, leakage testing etc including testing for smooth functioning complete all as specified and directed.

S&F PCB plate of AC split type 1.5 Ton/2 Ton with new remote complete all as specified and directed. Make- LG/ Voltas/ Sidwal/ Carrier/Videocon

Repair/servicing to RO system of capacity up to 50 Ltrs per hour of any type /make by dismantling the accessories carefully after disconnecting the electric connections , making necessary repairs by replacing unserviceable parts and re-fixing the system properly at the same place after testing complete all as specified and directed. Notes :- Spare parts required shall be measured and paid separately as 'supply only 'under relevent items

Supply only Pre filter for RO system up to 50 Ltr capacity

Supply only Carbon block filter for RO system up to 50 Ltr capacity

Supply only UV for RO system up to 50 ltrs capacity

Supply only Membrance for RO system up to 12 to 15 ltrs capacity

Supply only Pressure pump for RO system up to 12 to 15 ltrs capacity

S&F in repair sub main wiring with two runs of single core PVC, FRLS sheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 4 Sqmm for continous earth wire drawn into the existing concealed conduit of suitable size not less than 20mm dia complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor shall be measured as one length)

Supply only NEO-CHLOR-90 (TRICHLOROISOCYNAURIC ACID DRY TYPE) for chlorination of swimming Pool, (ISI marked) complete all as specified and directed.

S&F in repair PVC suction hose pipe,heavy duty, 50 mm dia, 30 Meter long (ISI marked) complete all as specified and directed.

Supply & fix in repair Cast iron sluice valve, 80 mm dia, 1.6 PN, long body, confirming to IS- 14846 : 2000 complete all as specified and directed.

M&L for preparation/cleaning of old painted steel surfaces of any description such as suction line, delivery line, priming line, valves and Quartz sand filter complete by scraping out old painted surface and painting with two coats of synthetic enamel paint including marking flow direction complete all as specified and directed .

M&L for repairing and servicing of leakages/blockage at flanges at various joints such as near pressure guage, motor, pipes within swimming pool plant premises by opening the joint and replacing flanges of size upto 25mm dia and length complete with teflon tape and other accessories to ensure no leakage all as specified and directed. Note: (i) Complete clearing of leakage at any leakage point shall be considered as one job. (ii) The rates of spares required i.e flanges/teflon tape/packings/gaskets etc shall be deemed to be included in the quoted rate of item

M&L for repairing and servicing of leakages/blockage at flanges at various joints such as near pressure guage, motor, pipes within swimming pool plant premises by opening the joint and replacing flanges of size 80mm dia and length complete with teflon tape and other accessories to ensure no leakage all as specified and directed. Note: (i) Complete clearing of leakage at any leakage point shall be considered as one job. (ii) The rates of spares required i.e flanges/teflon tape/packings/gaskets etc shall be deemed to be included in the quoted rate of item

S&F in repair motor cooling fan for existing centrifugal pump set of capacity 5.5 HP, electric driven, 3 phase, 415 volt complete all as specified and directed

S&F in repair bearing for existing centrifugal pump set of capacity 5.5 HP, electric driven, 3 phase, 415 volt complete all as specified and directed

S&F in repair star delta centrifugal pump starter, 7.5 H,P 415V, 3 Phase auto switch complete all as specified and directed.

S&F in repair Cast iron foot valve (ISI marked) of size 80 mm dia for under ground sump CI/GI suction line including nipple of suitable size, welding, connection and testing complete all as specified and as directed.

M&L for servicing of Splash maxim motor pump of capacity 5.5 HP including replacement of filter (as per existing), filter cover,gland , greasing of bearing of pump and motor, tightening the nut & bolt and making proper aligment of motor and pump complete all as specified and directed.

M&L for preparation of old painted steel surfaces of pump & motor set of any capacity and painting with one coat of synthetic enamel paint complete all as specified and directed .

M&L for preparation of old painted steel surfaces of LT panel and painting with one coat of synthetic enamel paint complete all as specified and directed .

M&L for servicing of electric dosing pump mounted both on its base as well as on wall including replacement of tube (as per existing) complete all as per specified and directed.

M&L for servicing of suction sweeper including replacement of 600mm wide suction head with four numbers rubber tired wheel spring loaded brush with towing nylon rope (as per existing) complete all as per specified and directed

Supply only alum for filtration of water of swimming Pool , confirming to the relevent IS (ISI marked) complete all as specified and directed.

Supply only copper sulphate for pool water,confirming to the relevent IS (ISI marked) complete all as specified and directed.

Supply only hydro chloric acid, LR type suitable for swimming pool water complete all as specified and directed.

S&F in repair UPVC pipe of dia 80/75mm ,SCH 40 complete all as specified and directed.

S&F in repair UPVC pipe of dia 15mm ,SCH 40 complete all as specified and directed.

S&F in repair butterfly valve 80/75mm bore, made out of UPVC material of SCH40 standard quality complete all as specified and directed.

S&F in repair butterfly valve 50mm bore, made out of UPVC material of SCH40 standard quality complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair UPVC bend of dia 80mm complete all as specified and directed.

S&F in repair UPVC bend of dia 15mm complete all as specified and directed.

S&F in repair UPVC Tee including union of dia 80mm complete all as specified and directed.

S&F in repair UPVC Tee including union of dia 15mm complete all as specified and directed.

S&F in repair UPVC flange of dia 80mm complete all as specified and directed.

S&F in repair UPVC flange of dia 15mm complete all as specified and directed.

Supply only Orthodoline solution 500ml (in bottle) with chlorine testing colour chart complete all as specified and directed.

Cleaning of RCC Under ground sump of capacity 50000 Ltr by scrapping the bottom surface & side walls by brooming with hard wire brush, removal of sludge/mud/silt and other foreign materials with the help of buckets etc , dewatering the entire sump and finally washing with concentrated bleaching powder solution (10 :1) of water and bleaching powder respectively and disposal of collected sludge/mud material to a distance exc. 50 m but not exceeding 100 m from the site including applying a coat of cement base primer . Date of cleaning shall be written with white paint on the black strip approx size 30" x24" complete all as specified and directed.

Supply only aluminium swimming pool vacuum cleaner 17.5 inch,heavy duty,vacuum head roller on wheels with handle brush complete all as specified and directed.

M&L for servicing of bobbin wound filter PRAGA model (Astrapool make ), 1600mm dia fitted with pressure gauge and other accessories including removing the existing material from dual filter media and supply & packing new gravel 1-2mm size ( 675Kg) and sand 0.4-0.8mm size ( 2150Kg ) including painting the entire surface with one coat of synthetic enamel paint complete all as specified and directed.

Excavation in trenches, not exc. 1.5 metre wide and depth exc. 1.5 metre but n.exc 3.0 metre, for foundation/pipe lines etc and getting out in soft/loose soil complete all as specified and directed .

Returning, filling in including spreading, leveling, watering & and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed .

M&L for construction of Valve pit of size 1050mmX1050mmX1050mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed. .

S&F in replacement LED bollard 10 Watt, IP 65 rated with all fittings laid in ground with PCC 1:2:4 type B-1 block of size 60cmx60cmx60cm including making connection with wire of requisite size, 01meter long complete all as specified and directed.

S&F in replacement PVC non metallic rigid conduit, 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 6 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

S&F in repair electric driven mono block pump set,single phase of capacity 0.50 HP complete all as specified and directed.

M&L for taking out complete filter media from water filter bed of capacity 20000 gallon/hour including cleaning the water filter bed by scrapping the bottom surface & side walls by brooming with hard wire brush, removal of sludge/ mud/silt and other foreign materials , dewatering the entire water filter bed complete all as specified and directed.

Supply and laying filter media of screened graded sand of size 2 mm to 5 mm in water filter bed of size 4mx3mx0.5m complete all as as specified and directed .

Supply and laying filter media of screened graded sand of size 0.5 mm to 1 mm in water filter bed of size 4mx3mx0.5m complete all as as specified and directed .

Supply and laying filter media of screened graded gravel of size 32mm to 40 mm in water filter bed of size 4mx3mx0.5m complete all as as specified and directed .

Supply only twisted Nylon rope ( ISI marked) 15 mm dia & 30 m long, industrial grade, multipurpose, line rot alkali chemical weather resistant complete all as specified and directed.

Supply and fix in replacement CI foot valve (Flanged) 80mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed..

Taking proper shut down in writing, disconnecting all the electrical connections, dismantling the motor from the base plate and transporting the same for repair to workshop for rewinding, dismantling the motor/rotor, cutting and removing the old heated up/burnt winding of the stator/rotor, cleaning the slots,bearing,bushes etc ,rewinding the motor stator/rotor with super enameled copper winding wire of existing size , gauge and turns etc including all the insulating materials ie.varnish ,china glass paper,'F' class paper, insulating paper etc and transportation back the same after winding ,reassembling at original position and testing complete of electric motor 7.5 HP ,3 phase, 415 volts, AC supply all as specified and directed . Notes:- (a) The contractor shall return the motor within week’s time after handing over for repairs to contractor otherwise a penalty of Rs. 1000/- per day will be charged from the contractor. (b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, nuts bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (c)The contractor shall arrange a visit of Engr-in-Charge to workshop for each job and cutting of complete burnt winding of motor shall be done in presence of Engr-in-Charge

Taking proper shut down in writing, disconnecting all the electrical connections, dismantling the motor from the base plate and transporting the same for repair to workshop for rewinding, dismantling the motor/rotor, cutting and removing the old heated up/burnt winding of the stator/rotor, cleaning the slots,bearing,bushes etc ,rewinding the motor stator/rotor with super enameled copper winding wire of existing size , gauge and turns etc including all the insulating materials ie.varnish ,china glass paper,'F' class paper, insulating paper etc and transportation back the same after winding ,reassembling at original position and testing complete of electric motor 5 HP ,3 phase, 415 volts, AC supply all as specified and directed . Notes:- (a) The contractor shall return the motor within week’s time after handing over for repairs to contractor otherwise a penalty of Rs. 1000/- per day will be charged from the contractor. (b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, nuts bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (c)The contractor shall arrange a visit of Engr-in-Charge to workshop for each job and cutting of complete burnt winding of motor shall be done in presence of Engr-in-Charge Note :- A Sum of Rs. 93,784.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22 & 23 (Schedule of credit) of Tender Documents.

RAGHAV ELECTRICALS

DEEPAK ENTERPRISES

M/S BSS AND SONS