NIT NO. 2 (20-21) Item No. 7

Supply of Horizontal Split casing pump for clear water applications having discharge 150 m3/ hr, head 40 meter with bronze impeller& neck ring, SS 410 Shaft & sleeve, CI body, Pump suction/delivery size 125mmx100 mm respectively with 40 HP, 3 phase AC, 1450 rpm, TEFC squirrel cage induction motor mounted on a common fabricated MS base frame with CI tyre/ Pin bush coupling. Make:-Pump:-M&P/KBL/Jyoti/BBL/DJB approved make. Motor :- KEC/Crompton/ABB/Jyoti/ DJB approved make.

Supply of M.S pipe of size 200 mm dia X 9.5mm Thickness heavy duty as per IS: 1239. Make - Jindal / Tata / any DJB approved.

Supply of M.S pipe of size 125 mm dia X 9.5mm Thickness heavy duty as per IS: 1239. Make - Jindal / Tata / any DJB approved.

Supply of 200 mm dia M.S. Bend Heavy Duty.

Supply of M.S Flange of size 200 mm, Heavy Duty.

Supply of 125 mm dia M.S. Bend Heavy Duty.

Supply of M.S Flange of size 125 mm, Heavy Duty.

Supply of nut bolt.

Providing/fixing of Pressure Gauge of size 150mm having range of 2- 70 Kg/cm2 of brass bourdon tube, m.s. casing, having accuracy +- 2%. Make:- H. Guru / any DJB approved.

Supply of rubber neoprene packing sheet. Make: Jyoti/national/any DJB approved.

Supply of 45W L.E.D Light energy saving &environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E. D as light source. Make-Havells, Bajaj/Crompton and any approved make by DJB

Supply and fixing of 32mm dia. 02 Mtrs. long G.I pipe (medium class) bracket for mounting of fluorescent/ HPMV/HPSV street light fitting on pole/ wall including bending the pipe to the required shape, 2 Nos. 40mmX3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR-18(E&M), Item code- 12.34

Supply of ceiling fan of 1200mm sweep area of brown colour. Make: - Standard/ Orient/ Havells/any DJB approved.

Supply of NRV of size 125 mm IS: 5312 part 1 PN1.0/PN 1.6. Make - Kirloskar / IVC / any DJB approved.

Supply of Non-Rising Sluice valve of size 125 mm, IS: 14846 PN1.0/PN 1.6. Make - Kirloskar / IVC / any DJB approved.

Dismantling of existing delivery header line by cutting of old rusted nut bolt with the help of gas cutter, welding machine and heavy manual labour and taking out the material for safe and suitable place as per direction engineer in charge.

Fixing of 200mm M.S. Pipe having, along with Non-Return Valves, Sluice Valves, Pipes and Flange welding, with the help of all labour like Fitter, Welder Cutter, Helper, Beldar, Electrician, and Supervisor etc. and material like Welding machine, Cutter Set, Oxygen Cylinder, welding rods and T&P etc.

Dismantling of existing pump, motor from the base frame by cutting of rusted M.S nut bolts and foundation bolts by gas cutter set and electric welding machine, removing all the nut bolt and worm out M.S Base frame from the RCC foundation suction and delivery side by gas cutter set and electric welding set job also includes dismantling the suction & delivery side sluice valve, NRV, taper bend etc. as per side requirement and lifting of pump and motor on safe place. Breaking of RCC foundation by pneumatic power hammer chisel and electric compressor machine etc. the job includes removing the broken material from P/H and disposing the same at suitable place.

Making of RCC foundation of size 1.5 mtr X 1mtr X0.9m by 1:2:4 concrete including providing fixing of 6 nos. foundation bolt of size 20mm X600mm

Fixing the M.S. base frame on the RCC foundation the job includes proper leveling and alignment. Installation of the pump set as per original position with proper alignment and also making of all electrical connections, fitting all valves, bends etc. in original position and testing / commissioning of the pump set on NO load & full load after commissioning of all connections.

Goodwill Enterprises

Raj Engineering Co.