Providing and fixing of Road Safety Furniture on various roads of National Highway and Major District Roads in Provincial Division, PWD (BNR) Br., Nuh in Nuh Distt.

Amount

Providing and marking centre line / side line 2.5 mm thick (minimum) with hot applied thermo-plastic road marking paint 10 Cms wide/ 15cm wide complete in all respects as furnishing all labour, materials, tolls, equipments including all incidental costs necessary for carrying out in work at site conforming to the technical specification as clause No. 803 of MORT&H specification for road and bridge works (5th revision) of 2013/Latest edition. Each container of the thermoplastic material shall have the name, trademark or other means of identification of manufacturer, batch number, date of manufacture, color maximum application temperature and maximum heating temperature. The thermoplastic paint material shall be of Asian Paint–Apcomark/Berger–Sigmarc/Prismo. The glass beads shall be of Potters/Sovitec/Flexolite. The thermoplastic material shall be sampled and tested in accordance with appropriate ASTM/BS method. The contractor shall furnish to the Engineer – in – charge a copy of certified test reports from the manufacturer of the thermoplastic material meet all requirements of the specifications. The reflextorizing glass beads shall meet the requirements of clause – 803.4.2 and test methods mentioned in clause – 803.4.2.4 shall be meticulously followed. The minimum thickness specified is exclusive of surface of glass beads. The method of thickness measurement shall be in accordance with appendix B and C of BS: 3262 (Part – 3). Note:- Before start of the work the contractor shall give brand, batch no., manufacturing date of the material to be used and get approved the same from Engineer-In-Charge before use. (Approved make brand such as Avery Dennison/3M /similar brand)

Pavement Marker (Cat Eyes) Moulded shank raised pavement markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing internal reflection of the light entering the lens face and shall support a load of 16000 KG tested in accordance to ASTM D 4280 Type H and complying to specifications of Category A of MORTH Circular No. W/NH/33023/10-97-DO III dt. 11.06.1997. The height width and length shall not be exceed 50mm, 100mm and 100 mm and with minimum reflective area of 13 Sqcm. On each side and the slope to the base shall be 35+/- degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19+/-2 mm and height not less than 30+/- mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer (of reputed make such as Avery Dennison/3M/similar brand) To be fixed at edge line/center line marking/speed breaker/in front of median in triangular shape etc. (Approved make brand such as Avery Dennison/3M /similar brand)

Providing and fixing retro-reflective hazard marker confirming to IRC 79:1981 of size 900x300 mm with back support of M S angle 25x25x3 mm and leg of 80mm dia having 1.6mm thickness duly painted, 1500 mm high embedded into 0.3x0.3x0.45m M20 grade Concrete as per site requirements, using non-metallic micro-prismatic retro-reflective sheet conforming to IRC: 67-2012 type IV specification fixed on 3 mm thick aluminum composite Material sheet as base having 0.5 mm thick aluminum on both sides. (of reputed make such as Avery) Dennison/3M/similar make)To be fixed on bridges/culverts etc. (Approved make brand such as Avery Dennison/3M /similar brand)

Cautionary/ Warning signs 900 MM equilateral triangle:- Left/Right Curve, Right/ Left hairpin bend, side road left/ right. Y intersection, cross road, narrow road ahead, road widens, narrow bridge ahead, reduced carriage way, start of dual carriageway, end of dual carriageway, gap in median, pedestrian crossing, School ahead, men at work, speed breaker, rumble strip, guarded railway crossing and other sign etc. (Approved make brand such as Avery Dennison/3M /similar brand)

Cautionary/ Warning signs 600 MM equilateral triangle:- Left/Right Curve, Right/ Left hairpin bend, side road left/ right. Y intersection, cross road, narrow road ahead, road widens, narrow bridge ahead, reduced carriage way, start of dual carriageway, end of dual carriageway, gap in median, pedestrian crossing, School ahead, men at work, speed breaker, rumble strip, guarded railway crossing and other sign etc. (Approved make brand such as Avery Dennison/3M /similar brand)

Ravinder Singh

Vats Construction Company

Pulkit Aggarwal

Kamal Kumar Gera

Raghubir Singh

MTZ Associates

M/s SYS Associates

ATUL BARAK

Naveen Enterprises

M/s Navdeep Enterprises

DMC Enterprises

R K JAIN INFRA PROJECTS PRIVATE LIMITED

M S CONSTRUCTION