REPAIR/MAINT OF PUMP MOTOR, VOLTAGE STABILIZERS, DG SETS CONNECTED WATER SUPPLY PANELS WITH ALLIED WORKS AT MIRAN SAHIB UNDER GE JAMMU

Amount

Repair/maintenance/servicing to DG Set of capacity 7.5 KVA to 35 KVA installed at pump house/site complete with entire cleaning checking of fuel pipe, lub oil pipe, rubber hose, panel wiring, fan belt, earthing strip, nut, bolts, exhaust pipe, battery pads, radiator hose, measuring instruments and tightening all nuts, bolts, MS rubber hose clamps and to make the system leak proof and serviceable complete with including Replacement of fuel filter elements all types as under and minor spare parts, nuts , washer, radiator top cap, battery terminal brass bolts type and changing engine oil incl cleaning to oil sump complete all as specified and directed ny Engr-in-Charge. Note-: Spare parts shall be measured and paid separatly under relevant items of BOQ.

All as per serial item No. 01 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 01 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Fuel filter primery with 'O' ring for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 04 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 04 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Fuel filter secondary with 'O' ring for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 07 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 07 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Lub oil filter with 'O' ring for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 10.00 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 10.00 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Lub oil by pass filter with 'O' ring DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 13 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 13 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Air cleaner element DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 16 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Fan belt set for radiator, alternator and water pump for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 19 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 19 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Battery lead copper heavy duty having length 1.5 mtr each complete with one side banjo bolt and other side brass battery terminal bolt type (set of 2 pcs) of suitable size complete all as specified and directed by Engr-in-Charge.

Rubber hose pipe for radiator, water pump, set of 01 RM complete with MS clamp of suitable size complete all as specified and directed by Engr-in-Charge.

Repair/ servicing of self starter 12 volts DC complete with and including replacement burnt/UNSV spare parts, clutch assembly, carbon brush, solenoid switch, plunger, armature for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge. Note-: Minor spare parts shall be deemed to be included in the qouted rate.

All as per serial item No. 24 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 24 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Dismantling/repair/over hauling of water pump assembly of DG set by replacing defective part like pump, shaft, impeller CI, mechanical seal, water set gasket, hub for pulley, set screw, bearing grooves nuts, spacers and spring washer and metling /machine work for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge. Note-: Minor spare parts shall be deemed to be included in the qouted rate.

All as per serial item No. 27 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 27 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Dismantling/repair/over hauling of charging alternator (dynamo) of DG set and replacement of UNSV/defective parts like carbon brushes, bearing, pulley, spacer, commutator assembly, armature, washer etc for DG set of capacity 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge. Note-: Minor spare parts shall be deemed to be included in the qouted rate.

All as per serial item No. 30 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 30 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Suppy only engine oil servo super grade 20/40W including cleaning of oil sump throughly all as specified and directed

Dismantling/taking down radiator assembly for repair/servicing for DG set of capacity 7.5 KVA to 35 KVA and carry out complete internal cleaning, brazzing to tubing and rectification of leakage and refitting including replacement of minor spare parts like inlet/outlet rubber hose with MS clamps, pipe for thermostate to radiator washer, nut, bolts all as specified and directed. Note-: Minor spare parts shall be deemed to be included in the qouted rate.

All as per serial item No. 34 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 34 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Disconnecting pump of DG set of capacity 7.5 KVA to 35 KVA and carry out complete servicing/calliberation from authorised service centre, and re-assembling after calibration including replacement of injector nozzle, delivery valves gasket, fuel pump gear, flange assembly, plunger, copper washer, adaptor, set both etc. as required complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 37 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 37 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Self starter 12 volts , copper wound suitable for DG set of 7.5 KVA to 35 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 40 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 40 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Set of high pressure of fuel pipe of engine 7.5 KVA to 160 KVA complete nut, set volt, clamp and spring washer etc complete all as specified and directed by Engr-in-Charge.

Oil sump gasket complete all as specified and directed by Engr-in-Charge.

Water temp switch suitable for DG set of capacity 7.5 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

AVR suitable for DG set of capacity 7.5 KVA to 35 KVA all as specified and directed

All as per serial item No. 46 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 46 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

diode and rectifier for alternator suitable for DG set of Capacity 7.5 KVA to 160 KVA Complete all as specified and directed.

OFF load open execution change over switch 4 pole 415 volts 100 Amp in sheet steel enclosure conforming to IS with side operated handle complete with fixing by means angle iron bracket of size 40x40x6mm thick as per size requirement or as directed.

OFF load open execution change over switch 4 pole 415 volts 160 Amp in sheet steel enclosure conforming to IS with side operated handle complete with fixing by means angle iron bracket of size 40x40x6mm thick as per size requirement or as directed.

OFF load open execution change over switch 4 pole 415 volts 200 Amp in sheet steel enclosure conforming to IS with side operated handle complete with fixing by means angle iron bracket of size 40x40x6mm thick as per size requirement or as directed

Dismantling to alternator from the engine of DG set of capacity 7.5 KVA to 35 KVA capacity by opening nut and bolt and transport to work shop for repair/maint and rewinding with supper enameled heat resistent copper winding wire of existing size and nos of turn complete with insulating material i.e. varnishing,bamboo strips,cotton thread/tape, leather paper etc and drying the winding complete with checking,realignment,welding,grinding, work and polishing the alternator rotor shaft and re-fixing the alternator with engine after repair/rewinding and testing on full load all as specified and directed. Note-: copper winding wire will be measured and paid separately.

All as per serial item No. 53 here-in-above but cap 40 KVA to 62.5 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 53 here-in-above but cap 63 KVA to 160 KVA complete all as specified and directed by Engr-in-Charge.

Ball bearing of alternator heavy duty conforming to ISI suitable for DG set alternator upto 160 KVA complete all as specified and directed.

Battery charging unit including rectifier unit voltage ragulator, two nos clamp, nuts, bolts and 5 Mtr length of stranded copper conductor PVC cable 2.5 SQ mm 3 run from power point to battery charger and 1.5 M length of 2 run charging lead included connected complete all as specified and directed.

Battery of 12 Volts , 180 Ah for DG Set of capacity up to 160 KVA complete all as specified and directed.

Battery of 12 Volts , 150 Ah for DG Set of capacity 40 KVA to 62.5 KVA, complete all as specified and directed.

Preparation of surface by scrapping existing painted surface and painting canopy, alternator, diesel engine body, radiator base frame, engine - alternator base channel and panel board etc applying one coat of synthetic enamel paint of existing colour and one coat of heat resistant paint of approved quality to engine and exhaust pipe by spray Machine including writing SM/MES No of DG set capacity 7.5 KVA to 35 KVA all as directed by Engineer-in-charge.

Preparation of surface by scrapping existing painted surface and painting of alternator, diesel engine body, radiator base fram , engine base channel and panal board etc applying one coat of synthetic enamel paint of existing colour and one coat of heat resistant paint of approved quality to engine and exhaust pipe by spray Machine including writing SM/MES No of DG set capacity 40 KVA to 150 KVA all as directed by Engineer-in-charge.

On load change over switch 3 phase 415 volt 50 Hz 125 Amp to be fixed in existing panel complete all as specified and directed.

On load change over switch 3 phase 415 volt 50 Hz 200 Amp to be fixed in existing panelcomplete all as specified and directed.

Carrying out complete overhauling / servicing of DG set panel/ control panel, including checking and rewiring faulty electrical circuit using 1.5 sqmm FRLS copper conductor, for DG Set of any type / make / capacity, making all electric connections and testing for smooth operation, complete all as directed.

Volt meter , 3 phase(0-500) volt complete all as directed.

Ammeter (0-400) Amps , 3 Phase complete all as directed.

Opening /taking out of turbo charger of DG set of capacity of 7.5 KVA to 35 KVA,disconnection of air supply connection pipe etc,complete overhauling,servicing of turbo charger inclding replacement of turbo charger repair kit calibration/ testing of turbo charger system complete and re-assembling the same, fitted with DG set properly in original position, checking the allignment, making proper all connection, testing complete all as directed.

Opening /taking out of turbo charger of DG set of capacity of 40 KVA to 160 KVA, disconnection of air supply connection pipe etc,complete overhauling,servicing of turbo charger inclding replacement of turbo charger repair kit calibration/ testing of turbo charger system complete and re-assembling the same, fitted with DG set properly in original position, checking the allignment, making proper all connection, testing complete all as directed.

Supply and fixing, RPM CABLE including taking out old unsv complete all as directed.

Radiator cap suitable for DG Set of any type / make and capacity, complete all as directed.

Thermostat alongwith complete assy for DG set connection testing complete all as specified and directed.

Opening / taking out of injector of DG set of any type/make and capacity 7.5 KVA to 35 KVA disconnection and opening of fuel injector assembly, carrying complete overhauling/servicing fuel injection system including replacement of injector repair kit, calibration of injector, checking of pressure complete for each injector and re-assembling the same, fitted with DG set properly in existing position, checking the allignment, making proper fuel connection, complete all as directed.

Opening / taking out of injector of DG set of any type/make and capacity 40 KVA to 160 KVA disconnection and opening of fuel injector assembly, carrying complete overhauling/servicing fuel injection system including replacement of injector repair kit, calibration of injector, checking of pressure complete for each injector and re-assembling the same, fitted with DG set properly in existing position, checking the allignment, making proper fuel connection, complete all as directed.

Supply and filling pre mixed Coolant suitable for DG set rediator, complete all as directed.

MCCB of 400 Amps,4 pole ,with Thermal -Magnetic Release , type with breaking capacity Icu at 415 volts AC,50Hz , 36 kA ,including connection and testing complete all as specified and directed.

MCCB of 250 Amps,4 pole ,with Thermal -Magnetic Release , type with breaking capacity Icu at 415 volts AC,50Hz , 36 kA ,including connection and testing complete all as specified and directed.

MCCB of 200 Amps,4 pole ,with Thermal -Magnetic Release , type with breaking capacity Icu at 415 volts AC,50Hz , 36 kA ,including connection and testing complete all as specified and directed.

MCCB of 125 Amps,4 pole ,with Thermal -Magnetic Release , type with breaking capacity Icu at 415 volts AC,50Hz , 36 kA ,including connection and testing complete all as specified and directed.

MCCB of 100 Amps,4 pole ,with Thermal -Magnetic Release , type with breaking capacity Icu at 415 volts AC,50Hz , 16 kA ,including connection and testing complete all as specified and directed.

MCCB TPN 250 Amps , 415 Volts, 25 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type as per existing incl complete connection and all as directed.

MCCB TPN 160 Amps , 415 Volts, 25 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type as per existing incl complete connection and all as directed.

MCCB TPN 100 Amps , 415 Volts, 16 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type as per existing incl complete connection and all as directed.

MCCB TPN 63 Amps , 415 Volts, 16 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit fix in repaired type as per existing incl complete connection and all as directed.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 Sq mm, 3.5 core, including taking out old unsv complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sq mm, 3.5 core, including taking out old unsv complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 Sq mm, 3.5 core, including taking out old unsv complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sq mm, 3.5 core, including taking out old unsv complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sq mm, 3.5 core, including taking out old unsv complete all as specified and directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation

Excavating in trenches n.exc 1.5 mtrs wide and n.exc 1.5 mtr in depth for foundation of poles, taking out/laying of cables, poles etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.

Sand cushioning for laying of cable 18 cm before laying of cable and 5 cm after laying of cable complete as specified and directed. Note-: Punned thickness shall be measured.

Comman burnt clay building sub class `B' bricks, laid over sand Cushioning laid at right angle along with cable, all as specified and as directed.

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25cm complete all as specified.

Removing of excavated any type of soil to distance not exc 50m all as specified and directed.

GI tubing tight graded 80 mm dia incl all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed

Cutting of existing road/floor/plinth/drain for taking out /laying of UG cable throgh GI pipe inclding necessary earth work , excavation and making good to match with existing surface complete all as specified with PCC 1:3:6 type- C1(using 20mm graded crushed stone aggregate ) complete all as specified.

Super enameled copper wire of appropriate guage and cross section and turn as per existing all as directed by Engineer-in-charge

Disconnecting and taking out of existing submersible pump set from borewell capacity 15 to 25 HP alongwith their column pipe and submersible cable from bore well from any depth complete all as specified and directed by Engineer-in-charge.

Lowering the submersible pump set complete with motor and pump capacity 15 to 25 HP in bore well and connecting to existing system complete all as specified and as directed by Engineer-in-charge.

Strip opening of submersible pumping set having capacity 15 to 25 HP any stage / discharge and dismantling all spare parts by opening studs complete with machine / lathe work / grinding / polishing and fitting of all spare parts and re-assembling / installation in position after necessary repair of unserviceable / defective spare parts complete all as specified and as directed. Note:- Spare parts shall be measured and paid separately under respective items as under-:

Cast iron stage bowl complete all as specified and as directed.

Cast iron suction discharge chamber complete all as specified and as directed.

Stainless steel neck ring complete all as specified and as directed.

Stainless steel bowl bush complete all as specified and as directed.

Stainless steel coupling sleeves complete all as specified and as directed.

Cast iron impeller with key complete all as specified and as directed.

Body studs fully threaded complete all as specified and as directed.

Stainless steel pump shaft complete all as specified and as directed.

Stainless steel pump shaft coupling with key complete all as specified and as directed.

Cast iron NRV with NRV seat and cone complete all as specified and as directed.

Stainless steel sleeves for bowl complete all as specified and as directed.

Rubber bush complete all as specified and as directed.

Strainer for pump complete all as specified and as directed.

Submersible cable 16 Sqmm 3 core flat copper conductor heavy duty 1100 Volts grade confirming to ISI complete all as specified and directed by Engineer-in-Charge.

Altoch GP calcium-based granular packing of 45 Kg in drum complete all as specified and as directed.

Labour for disconnecting all incomming /outgoing electric connction carefully of fully automatic servo voltage stabilizer and transport to work shop for repair/servicing and including,dismantling top cover of stabilizer and taking out the coil,drain out the transformer oil and refilling after dehydration of transformer oil,cleaning internaly, including replacement of unsv body nut,bolts,washers,top gasket of cork sheet 6 mm thick,replacement of internal circuit wiring if any suitable size of copper wire and painting of stabilizer with heat resistant smoke grey synthetic enameled paint including preparation of old rusted surfaces and writting MES NO, SM MES No, capacity,Ser No, location etc and re-installation/connecting electric connection with replacement of proper size aluminium lugs and testing on full load at site , of capacity 30 KVA to 50 KVA complete all as specified and as directed.

All as per serial item No. 115 here-in-above but cap 60 KVA to 100 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 115 here-in-above but cap 120 KVA to 300 KVA complete all as specified and directed by Engr-in-Charge.

Synchronous motor single phase 230 Volt suitable for servo voltage stabilizer having of capacity 30 KVA to 50 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 118 here-in-above but cap 60 KVA to 100 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 118 here-in-above but cap 120 KVA to 300 KVA complete all as specified and directed by Engr-in-Charge.

PCB suitable for servo voltage stabilizer having capacity 30 KVA to 50 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 121 here-in-above but cap 60 KVA to 100 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 121 here-in-above but cap 120 KVA to 300 KVA complete all as specified and directed by Engr-in-Charge.

Dimmer motor suitable for servo voltage stabilizer having capacity 30 KVA to 50 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 124 here-in-above but cap 60 KVA to 100 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 124 here-in-above but cap 120 KVA to 300 KVA complete all as specified and directed by Engr-in-Charge.

Toggle on/off switch suitable for servo voltage stabilizer having capacity 30 KVA to 50 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 127 here-in-above but cap 60 KVA to 100 KVA complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 127 here-in-above but cap 120 KVA to 300 KVA complete all as specified and directed by Engr-in-Charge.

Volt meter 0-500 Amp 96mm squre type 3 phase 230 volt 50 Hz complete all as specified and directed by Engr-in-Charge.

Ampere meter 0-400 Amp, 96mm square type 3 phase 230 volt 50 Hz with CT of suitable ratio complete all as specified and directed by Engr-in-Charge.

Gun metal Gate or Globe valve 20 mm for drain out of oil complete all as specified and directed by Engr-in-Charge.

Brass/gun metal Stud bush suitable for 30 KVA to 50 KVA complete with connecting rod of suitable lenth and dia with necessary nut ,bolt ,washer,bushing packing to prevent the leakage from bushes and necessary connection all as directed.

Brass/gun metal Stud bush suitable for 60 KVA to 100 KVA complete with connecting rod of suitable lenth and dia with necessary nut ,bolt ,washer,bushing packing to prevent the leakage from bushes and necessary connection all as directed.

Brass/gun metal Stud bush suitable for 120 KVA to 300 KVA complete with connecting rod of suitable lenth and dia with necessary nut ,bolt ,washer,bushing packing to prevent the leakage from bushes and necessary connection all as directed.

Dehydration of Transformer oil and dielectric strength of oil achieved not to be less than 40 KV at 2.5 mm gap all as directed.

Topping up of new low viscosity transformer oil from sealed drums confirming to IS 335-1993 Part-II after testing the correct dielectric strength up to 60 KV duly de-hydrated complete all as specified and directed.

Taking out main coil of voltage stabilizer for repair/rewinding with super enamaled copper winding wire of existing gauge including PVC insulated sheet sleeve,varnishing etc all as required and refix in repairing to the stabilizer after testing all as required at site or directed by Engr-in-Charge.

LT Panel board , Outdoor type, floor mounted, CRCA, made of sheet steel ,factory made suitable for 415 volt, 3 Ph 4 wire, 50 HZ, AC supply system of size not less than 1800 mm x 1800mm x 500 mm,open on both back and front side having hinges and locking arrangements having busbars chamber with Aluminium bus bars with vertically arranged of 1200 Amps rating duly insulated by insulation of RYB colour mounted on porcelain insulators .The panels shall be made out of 3.15 mm thick CRCA Sheet , powder coated based on MS channel for arrangement of foundation nuts , bolts and washers The Panel should be protected with IP 54 in accordance with IEC 60529. The gasket material shall be polyurethane,while the material shall be internally embedded. the Panel should be including with internal wiring with multistranded copper conductor cable of suitable size including lugs and cable gland to incoming and outgoing cable etc and supported on MS angle of size not less than 250 mm long, LED indicating lamps, current transformers, terminal block for cables and including making of suitable size foundations as per manufacturer recommendations and taking down old unserviceable panel/ pillars alongwith all accessories all as directed at site and to comprising the following items

(A) IN COMING-: (i) ACB C- Power 800 Amps 50KA, 4 pole 415 Volts AC Supply,MDO Type thermal magnetic release type DN1.-01 No (ii) Panel mounted multi function meter Consiting of Volt meter for measuring Voltage (0-500 Volts), Ampere meter for measuring Current(0-500 Amps) and Frequency meter of 50Hz and PF Meters- 01 No (B) OUT GOING-: (i) MCCB 4 Pole 415 Volts 36 kA 400 Amp .rating thermal magnetic release type. -02 No. (ii) MCCB 4 Pole 415 Volts, 36 kA 320 Amp .rating thermal magnetic release type. -02 No. (iii) MCCB 4 Pole 415 Volts 36 kA 250 Amp .rating thermal magnetic release type. -02 Nos

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground earth pit not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below ground level connected to galvanized iron strip of size 25 x 4mm by mean of nut / bolt and washer of galvanized iron or steel as shown in electrical plate no 5 of SSR Part-I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with RCC cover in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), funnel, wire mesh, charcoal dust, salt layers each layer thickness should be 15 cm (layer start from below the electrode plate to above plate) etc, connected to LT panel board as indicated including testing complete all as specified and as directed.

Earth Continuity conductor or main earthing Strip of size 24x4mm fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situations complete all as specified and as directed.

M/S DC CONSTRUCTIONS (BID ID -3484040)

BMMJ TRADERS AND ENGINEERS (BID ID -3484116)

VEE ESS ENGINEERS (BID ID -3478032)