PROVN OF SECURITY WALL WITH HEIGHT OF 2.1 MTRS AND SURMOUNTED WITH 0.8 MTRS HEIGHT BARBED WIRE FENCE AT ADM TRG AREA FOR CERTAIN UNIT UNDER GE (S) SECUNDERABAD

Amount

Dismantling fencing wire mesh any type all as specified and as directed.

Dismantling fencing post of struts (Wood, Steel or RCC) embeded in concrete all as specified and as directed.

Excavation in trenches n.exe 1.5m wide and n.exe 1.5m depth for foundation and getting out in hard/dense soil, all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (using 40mm size graded stone aggregates) in foundation, filling and mass concrete all as specified and as directed.

M&L Form work to sides of concrete footing, bases of coloumn such as plinth beam, sides of concrete foundation and similar work rough finished surfaces of flat concrete all as specified and as directed

M&L Form work to sides of concrete coloumn and similar work rough finished surfaces of flat concrete all as specified and as directed.

M&L Form work to sides of concrete beam, sides of concrete bands and similar work rough finished surfaces of flat concrete all as specified and as directed.

M&L for Mild Steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums, hooking ends, andincluding mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed.

M&L for Mild steel TMT bars 5 to 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally hopping and binding with and including mild steel wire (annealed not less than 0.9mm dia) as in stirrups etc, all as specified and as directed.

M&L for Reinforced cement concrete M-25 (Design Mix) (using 20mm size graded stone aggregate) as in footing, foundation beams, plinth beam, bases of columns etc., complete all as specified and directed.

M &L for Reinforced cement concrete M-25 (Design Mix) (using 20mm size graded stone aggregate) as in columns etc all as specified and as directed.

M&L for Reinforced cement concrete M-25 (Design Mix) (using 20mm size graded stone aggregate) as in Beam/Bands etc all as specified and as directed.

M&L for Brick work with flyash bricks, in cement mortar 1:6 with straight or curved on plan exceeding 6m mean radius completeall as specified and directed.

M&L for PCC (1:2:4) Type B1 (using 20 mm size graded stone aggregates) as in coping including necessary form work etc all as specified and as directed.

M&L for broken glass coping on top of walls set in cement mortar 1:3 all as specified and directed

Returning and filling including spreading, levelling waterring and well ramming in layers n.exc 25 Cm as in hard dense soil complete all as directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as directed.

M&L Rendering 15mm thick with CM 1:4 on fair faces of brickwork or concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of new plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F for framed work such as grills, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: framed balusters: walk ways: railings: framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiittings (exclusive or steeel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete conforming to Fe.290Gde-E-165 complete all as specified and directed

S&F Rolled mild steel in joist, channel, angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc incl all necessary drilling, bolting or rivetting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F Galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins all as specified and as directed. Note: Each line wire shall be measured and paid

M&L for preparation of new steel surfaces of any discription not otherwise discribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall, complete all as specified and directed.

Shri Sai Electricals

M/S B.SHRAVAN KUMAR

SAI RUPA CONSTRUCTIONS

DWARKA PERSHAD RADHEY RAMANLAL

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd

M/s RAMA LAKSHMI CONSTRUCTIONS