Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.2 LAccepted-Finance | L1 | Accepted-Finance Being Lowest (L1) | |
| 2 | L2₹18.3 L+₹3,874 (0.21%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹19.9 L+₹1.7 L (9.30%)Rejected-Finance SADASHIV PHUGE NAGAR OPP SANDVIK FACTORY RADHIKA RESIDENCY F WING FLAT NO 7 PHUGEWADI PUNE 411 012 | PUNE | MAHARASHTRA | 411012 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹23.4 L+₹5.1 L (28.1%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹26.5 L+₹8.3 L (45.3%)Rejected-Finance | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
22 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Vikas Tanwar, IDSE, GE (CME) Khadki
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi, Pune - 411 012
REPAIR/REPLACEMENT AND MAINT OF VARIOUS TYPES OF SECURITY ROAD, GARDEN AND AREA LIGHTS AT OFFICERS, JCOS/OR MD ACCN, FCBRNP, BD COY, CTW AT CME UNDER GE (CME) KHADKI
2024_MES_662245_1
8522/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi
Class D b(I)
7 documents required · 7 mandatory
₹500
Garrison Engineer (CME) Khadki
₹60,000
2 Sept 2024
26 Jun 2024
24 Jul 2024
26 Jun 2024
22 Jul 2024
9 Jul 2024
27 Jun 2024 - 8 Jul 2024
Amount
Excavation in trenches n. exc. 1.5m wide and n exc. 1.5m in depth for taking out/laying cables in soft/loose soil all as directed.
Excavation in trenches n. exc. 1.5m wide and n exc. 1.5m in depth for pole foundation/laying cables in Hard/dense soil all as directed.
Excavation in trenches exceeding 1.5m wide and n exc. 3 m in depth for pole foundation/laying cables in Hard/dense soil all as directed.
M & L for bituminous road cutting to a width of 45 cm and depth 60 cm for laying UG cables and making good with cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate)
Returning filling in, including, spreading, leveling, watering and well ramming in layers n exc. 25 cm all as directed..
Removing surplus excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point all as directed.
Supply , laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade cross sectional area 4 core 16 Sqmm in and including taking out old one all as specified and directed.
All as per item 07 above but of the size 4 core 25 Sqmm
All as per item 07 above but of the size 2 core 10 Sqmm
Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable incl couplers & bends complete all as specified. Make : REX POLYEXTRUSION LTD or its equivalent as approved
S & fix LT Cable joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 4 core of size 25 to 50 Sqmm all as directed. Make : Denson/3M/Raychem
M&L for cutting of tree branches of any girth along OH lines & street light pole at a distance not less than 2 meter on either side of the pole cleaning of bushes and shrubes of any type along entire RM of pole. Cleaning /prunning should be carried out as and when required during entire running period of contract or as when directed.
M&L for taking down and refixing of lights after decarbonizing of contact between street light/flood lights (installed on pole, high mast tower or bldg wall) and conductor/junction box bus bar by removing the wire of light fittings and cleaning the condutor/bus bar gently and reconnecting the wire at any height manually or with the help of hydraulic street light/high mast repair vehicle upto 16 mtr height including replacement of damaged wire connection from kiosk and concutor box to LED fitting/high mast fittings etc. Note :- Hydraulic ladder alongwith vehicle will be borne by Contractor and same will be included in quoting rate.
S&F in repalcement LED street light fittings of 45 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, IP 66 protection, cool white 6500 K, 240 Volts AC, 50 Hz, operating voltage range 160 V-270 V built in surge protection incl making proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Note :- Necessary T&P required for removing and fixing of light shall be borne by the contractor and same will be included in quoting rate.
All as per item No 14 above but capacity 60 Watt complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
All as per item No 14 above but capacity 90 Watt complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
All as per item No 14 above but capacity 120 Watt complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
S&F in replacement new LED flood light fittings of 100 watt warm/cool white high preesure die cast aluminium housing with sealed toughened glass cover, IP 66 protection,cool white 6500 K, 240 Volts AC, 50 Hz, working temperature range -20ºC to 60ºC,built in surge protection incl making proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Note :- Necessary T&P required for removing and fixing of light shall be borne by the contractor and same will be included in quoting rate.
All as per item No 18 above but capacity 60 Watt warm/cool white complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
All as per item No 18 above but capacity 200 Watt warm/cool white complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge.
S&F or passing through pipe, 1100 volts grade heavy duty , PVC insulated round 3 core 2.5 sqmm copper cable including electrical connection complete all as specified and directed by Engr-in-Charge.
S&F in replacement street light bracket made out of GI pipe medium grade 32 mm bore approx length not less than 120 cm bent to shape including new clamps made of MS flat of size 40x5 mm thick including cutting ,welding ,drilling holes ,nut,bolts washers etc including two coat of aluminium paint over one coat of red oxide primer on MS work complete all as specified and as directed.
M&L in replacement fabrication of Kiosk box of size 300 x 200 x 105mm made out of fibre material complete with TPN ,aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge.
M&L in replacement fabrication of Kiosk box of size 200 x 140 x 95mm made out of fibre material complete with SPN ,aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge.
M&L for replacement of old broken ACSR with aluminium conductor steel reinforced streching without kinks / bends and binding with insulators on street poles complete all as specified and directed by Engineer-in-Charge.
M & L for replacement of old cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed inclusive of one primer coat, one under and one finishing coat of aluminium paint all as specified including taking down the old one
M&L for replacement of GI Pipe Light grade with all connected accessories of sizes 40 mm complete as directed.Note:- Clamps nut bolts saddle etc will be paid & measured seperately.
S&F in replacement steel swaged poles complete with cast iron base plate, finial taperplug, bolts, nuts and screws as specified type 410 SP-31 and including painting with two coats of synthetic enamel aluminum paint over a coat of primer including preparation of new surfaces all as specified .
M&L for providing plain cement concrete type D-2 , 1:4:8 (using 40mm graded aggregate) in foundation filling and mass concrete all as directed.
M&L for providing plain cement concrete type C-2, 1:3:6 (using 40 mm grade aggregate) as in coping, finished even and fair, including necessary from work all as directed at site.
M&L for surface cleaning of steel tubular poles upto 11 Mtr height including removing rusted particles and painting with one coats of synthetic enamel aluminium paint including cross arms, bracing, supports, clamps, eye hooks, security light bracket, clamp etc incl painting on coping with cement base white paint complete all as directed. Note: (i) The quoted rate shall includes marking of numbers on each pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the reapiring of coping with cement / PCC.
M&L for cement based paint for PCC pole upto 11 mtr height including painting with one coats of synthetic enamel aluminium paint incl cross arms, bracing, supports, clamps, eye hooks, security light bracket, clamp etc incl painting on coping with cement base white paint complete all as directed.Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the reapiring of coping with cement / PCC.
M&L for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 32 Amps 415 AC, 50 Hz, 25kA thermal magnetic release adjustable type complete all as directed.
M&L for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 63 Amps 415 AC, 50 Hz, 25kA thermal magnetic release adjustable type complete all as directed.
S&F in replacement three pole Contactor 63 A Current Rating 70A General use 10A, 415V with coil three pole contactor complete.
S&F in replacement MNX 50 to 80 spare coil for three pole Contactor complete all as specidired and directed.
S&F in replacement Digital timer switch with inbuilt backup current capacity 16 Anps operated on 415 volts AC 50Hz complete all as specified and directed.
Taking down old unsv timer switches and S & F of Automatic street light control with infrared sensor based NATRURE SWITCH and VOLTAGE MONITORING SYSTEM (VMS) Three phase load of 8 KW for automation of street lights. Nature Switch operation should be based on Natural light Lux level. Required illuminance level for switching ON is < 30 Lux and for switching OFF > 10 Lux. The sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. VMS should have adjustable over & under Voltage trip level and protection against phase loss, Beutral loss & Phase reverse incl Power contactors (3 nos of capacity 25 amps per phase each) and incoming (3 nos of capacity 32 amps each)- outgoing MCB(3 nos of capacity 32 amps each) & main load circuit wiring (Copper) of minimum 10 sqmm. The sensor , VSM, Power contactor, MCBs incl connected items should be enclosed in a Pole/wall mountable enclosure made of rust proof, electric shock proof,termite proof and FR grade SMC junction box conforming to IP54. The circuit should also have provision for manual operation (i.e. sensor & VMS By-Pass option). Model Swadeep- 02EC8kW3P-VMS or equivqlent in Schneider/Havells/Legrand
All as per item No 38 above but for single phase load of 5 KW for automation of street lights complete all as specified and directed.
M&L for Preparation of old painted surfaces of LT Panel or Street light Panel covered by dust and other deposited materials by cleaning from Panel of Size upto 100 X 100 X 50 cm including Repair of panel door ,hinged nut .bolits clamp . etc .painting with one coat of aluminium paint complete all as specified.
S&F in replacement LED highbay optica light of 120 watt powder coated PDC aluminium housing and adustable bracket complete all as specified and directed.
S&F in replacement Mushroom (PRISMATIC) Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base incl lamp of 10 Watt complete.
S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 30 watt warm/cool white with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations.(Note - The contractor is responsible to arrange suitable height of ladder for replacement of fitting)
S&F in replacement aesthetically designed IP 65 LED post top 70 Watt (warm white) with aluminium enclosure, powered with high power LEDs as light source and die casted heat sink exhibits classic Victorian look with symmetrical light distribution and excellent heat dissipation for long life complete. Make : Havells cat part No JUPITERMAXIPT70WLED830PSYMTOPC or eqlnt in Bajaj/Crompton
S&F in replacement new generation, IP 65 LED post-top 35 Watt (warm/cool white) energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Make : Havells cat part No RUBYPT35WLED757PSYMTOPC or eqlnt in Bajaj/Crompton
S&F in replacement sturdy IP 65 LED Bollard 10 Watt (warm/cool white) with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding complete. Make Havells cat part No MINIMOUNTBL10WLED830PSYMTOPMMA or eqlnt in Bajaj/Crompton
S&F replacement circular LED post-top 45 Watt (warm white) having excellent uniform illumination and aesthetics in design ade up of Pressure Die Cast aluminium body and opal PC cover, IP 66 and IK 07 rating ensures it stands tall amid varied environmental conditions complete. Make : Havells cat part No RINKPT45WLED757PSYMTOPC or eqlnt in Bajaj/Crompton
M&L for hiring of vehicle mounted telescopic ladder (working hight upto 20 mtr) for remoivng and fixing of lights on swan necked poles/hight mast light poles/bldgs and cutting of trees which are not approachable with bamboo ladder complete all as specified and directed.
Sachin Electricals (BID ID -3059736)
M/S kirpan Enterprises (BID ID -3062609)
ONKAR ELECTRIC AND GENERAL STORE (BID ID -3070934)
Mahindra Electric Stores (BID ID -3070204)
Priyanka Power line (BID ID -3060187)
N D ELECTRICAL (BID ID -3062606)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .